AMD Radeon PRO W7400 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison

AMD
RADEON

AMD Radeon PRO W7400

CORE STATE Navi 33
VRAM 8 GB
CLOCK SPEED 1100 MHz
TDP 55 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 6 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: AMD Radeon PRO W7400 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102

Where Each One Wins

The benchmark database shows a complete asymmetry in measured performance between these two cards. The AMD Radeon PRO W7400 has no recorded benchmark entries, resulting in an average benchmark score of zero and a percentile rank of 50 among all GPUs. The NVIDIA GeForce RTX 4070 Ti SUPER AD102, by contrast, has one recorded test result: a 3DMark Steel Nomad DX12 score of 6269.5, which rounds to an average benchmark score of 6270. That score places the NVIDIA card at the 36th percentile of all GPUs in the database.

The head-to-head comparison table contains no entries, and the win counter shows zero victories for either card. This means the database cannot attribute a single direct benchmark win to either product. The practical interpretation is that the AMD Radeon PRO W7400 lacks any measurable performance data, while the NVIDIA card has one data point that defines its standing. In terms of raw compute capability, the recorded specifications indicate the NVIDIA card holds a substantial lead in shading units, texture mapping units, ray tracing cores, tensor cores, memory bandwidth, and raw FP32 throughput. The AMD card counters with a dramatically lower power draw, a smaller physical footprint, and a more recent release date in the database.

The use-case split therefore falls along specification lines rather than measured outcomes. The AMD Radeon PRO W7400 appears suited to environments where power constraints and physical space dominate, given its 55 W power draw and single-slot, 168 mm length. The NVIDIA GeForce RTX 4070 Ti SUPER AD102, with its 285 W power draw, triple-slot cooler, and 310 mm length, targets workloads that demand maximum throughput, as indicated by its 44.10 TFLOPS FP32 rating versus 7.885 TFLOPS for the AMD card.

Architecture Differences

The two cards come from different manufacturers and use fundamentally different architectures. The AMD Radeon PRO W7400 uses the Navi 33 chip built on RDNA 3.0 architecture, with the codename "Hotpink Bonefish" and a 6 nm process node from TSMC. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 uses the AD102 chip built on Ada Lovelace architecture, with a 5 nm process node, also from TSMC. The transistor counts differ enormously: the AMD chip contains 13,300 million transistors on a 204 mm² die, giving a transistor density of 65.2M per mm². The NVIDIA chip contains 76,300 million transistors on a 609 mm² die, yielding a density of 125.3M per mm². The NVIDIA die is roughly three times larger in area and packs nearly six times the transistor count.

Memory architecture also diverges sharply. The AMD card uses 8 GB of GDDR6 on a 128-bit bus, producing 172.8 GB/s of bandwidth. The NVIDIA card uses 16 GB of GDDR6X on a 256-bit bus, producing 672.3 GB/s of bandwidth, roughly four times the AMD figure. The memory clock rates differ as well: the AMD card runs at 1350 MHz with 10.8 Gbps effective, while the NVIDIA card runs at 1313 MHz with 21 Gbps effective, nearly double the effective data rate.

Compute resources show a similar gulf. The AMD card has 1792 shading units, 112 texture mapping units, 64 ROPs, and 28 ray tracing cores, with no tensor cores listed. The NVIDIA card has 8448 shading units, 264 texture mapping units, 96 ROPs, 66 ray tracing cores, and 264 tensor cores. The NVIDIA card delivers 44.10 TFLOPS for both FP32 and FP16 (1:1 ratio), while the AMD card delivers 7.885 TFLOPS for both FP32 and FP16 (also 1:1). Pixel rate and texture rate follow the same pattern: 250.6 GPixel/s and 689.0 GTexel/s for NVIDIA versus 70.40 GPixel/s and 123.2 GTexel/s for AMD.

Both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API coverage is identical. The NVIDIA card belongs to the GeForce 40-series with a GeForce 40 generation label, while the AMD card belongs to the Radeon Pro Navi series under the Navi III generation. The AMD card lists its predecessor as Radeon Pro Vega, and the NVIDIA card lists its predecessor as GeForce 30 and its successor as GeForce 50.

Head-to-Head Benchmarks

The database contains no head-to-head benchmark entries for these two cards, so direct numerical comparisons must come from the single recorded test and the nearest rival data for the NVIDIA card. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 scored 6269.5 in 3DMark Steel Nomad DX12, which the database rounds to an average benchmark score of 6270. Its nearest rivals in the database include the NVIDIA GeForce RTX 5070 Ti SUPER with an average score of 6270 and a delta of 0 percent, meaning the two cards are exactly tied in this metric. The NVIDIA Quadro K620 shows an average score of 6282, which is 0.2 percent higher than the RTX 4070 Ti SUPER AD102. The AMD FirePro W600 shows 6223, which is 0.8 percent lower. The AMD Radeon R7 M350 shows 6327, which is 0.9 percent higher.

These deltas indicate that the RTX 4070 Ti SUPER AD102 sits within a narrow band around its nearest competitors, with the largest deviation being less than one percent in either direction. The AMD Radeon PRO W7400 has no benchmark entries, so it cannot be placed on the same scale. The specification gap between the two cards is far larger than any of these nearest-rival deltas: the NVIDIA card offers 5.6 times the FP32 throughput, 3.9 times the memory bandwidth, and 4.7 times the shading units. No measured data exists to confirm how these specification differences translate into real-world performance, because the AMD card has no recorded scores.

The absence of head-to-head entries means the database cannot show a single direct win for either card. The wins counter confirms this: zero for both. Any conclusion about relative performance must therefore rest on the recorded specifications and the single benchmark score for the NVIDIA card, not on direct comparisons.

Specification Differences

The two cards differ across nearly every recorded specification. The AMD Radeon PRO W7400 uses a 6 nm process node, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 uses 5 nm. Transistor counts are 13,300 million versus 76,300 million, and die sizes are 204 mm² versus 609 mm². Transistor density is 65.2M per mm² versus 125.3M per mm². Clock speeds differ substantially: the AMD card has a base clock of 330 MHz and a boost clock of 1100 MHz, while the NVIDIA card has a base clock of 2340 MHz and a boost clock of 2610 MHz. Memory clocks are 1350 MHz with 10.8 Gbps effective for AMD versus 1313 MHz with 21 Gbps effective for NVIDIA.

Memory capacity is 8 GB of GDDR6 versus 16 GB of GDDR6X. Bus width is 128 bit versus 256 bit, and bandwidth is 172.8 GB/s versus 672.3 GB/s. Shading units are 1792 versus 8448, TMUs are 112 versus 264, ROPs are 64 versus 96, and RT cores are 28 versus 66. Tensor cores are absent on the AMD card and number 264 on the NVIDIA card. Pixel rate is 70.40 GPixel/s versus 250.6 GPixel/s, and texture rate is 123.2 GTexel/s versus 689.0 GTexel/s. FP32 and FP16 throughput are both 7.885 TFLOPS for AMD and both 44.10 TFLOPS for NVIDIA.

Power draw differs by a factor of over five: 55 W versus 285 W. The AMD card is single-slot with no power connectors and a suggested PSU of 250 W, while the NVIDIA card is triple-slot with a single 16-pin connector and a suggested PSU of 600 W. Physical dimensions are 168 mm by 69 mm by 20 mm for AMD versus 310 mm by 140 mm by 61 mm for NVIDIA. The bus interface is PCIe 4.0 x8 for AMD versus PCIe 4.0 x16 for NVIDIA. Display outputs are 4x DisplayPort 2.1 for AMD versus 1x HDMI 2.1 and 3x DisplayPort 1.4a for NVIDIA.

Production status differs: AMD is active, NVIDIA is end-of-life. Release dates are 2025-08-02 for AMD and 2024-06-09 for NVIDIA. The NVIDIA card has a launch MSRP of 799 USD, which appears once in the database. The AMD card has no launch MSRP recorded. The NVIDIA card has a successor listed as GeForce 50, while the AMD card has no successor. The AMD card lists its predecessor as Radeon Pro Vega, and the NVIDIA card lists its predecessor as GeForce 30.

FAQ

Q: Which card has more FP32 compute throughput?

A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS FP32, while the AMD Radeon PRO W7400 delivers 7.885 TFLOPS FP32. The NVIDIA card offers roughly 5.6 times the raw FP32 throughput.

Q: What is the memory bandwidth difference?

A: The AMD Radeon PRO W7400 has 172.8 GB/s of bandwidth from 8 GB of GDDR6 on a 128-bit bus. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has 672.3 GB/s of bandwidth from 16 GB of GDDR6X on a 256-bit bus, approximately 3.9 times higher.

Q: How do the power requirements compare?

A: The AMD Radeon PRO W7400 draws 55 W with no power connectors and a suggested PSU of 250 W. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 draws 285 W with one 16-pin connector and a suggested PSU of 600 W.

Q: What benchmark score does the NVIDIA card have in the database?

A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has one recorded score: 6269.5 in 3DMark Steel Nomad DX12, which rounds to an average benchmark score of 6270. The AMD card has no recorded benchmark scores.

Q: How does the NVIDIA card compare to its nearest rivals?

A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 is exactly tied with the NVIDIA GeForce RTX 5070 Ti SUPER at 6270. It trails the NVIDIA Quadro K620 by 0.2 percent and the AMD Radeon R7 M350 by 0.9 percent, while leading the AMD FirePro W600 by 0.8 percent.

Q: What are the physical size differences?

A: The AMD Radeon PRO W7400 is 168 mm long, 69 mm high, and 20 mm wide, occupying a single slot. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 is 310 mm long, 140 mm high, and 61 mm wide, occupying three slots.

The Verdict

The data supports a clear separation of roles. The AMD Radeon PRO W7400 fits scenarios where power draw and physical footprint are the primary constraints. Its 55 W draw, single-slot design, 168 mm length, and lack of power connectors make it compatible with compact systems and low-capacity power supplies. Its 8 GB of GDDR6 memory and 172.8 GB/s bandwidth provide a baseline level of graphics capability, and its DisplayPort 2.1 outputs offer modern display connectivity. The active production status and 2025 release date indicate current availability in the database.

The NVIDIA GeForce RTX 4070 Ti SUPER AD102 targets workloads that demand maximum throughput. Its 44.10 TFLOPS FP32, 672.3 GB/s bandwidth, 16 GB GDDR6X memory, and 264 tensor cores position it far ahead of the AMD card in raw compute resources. The single recorded 3DMark Steel Nomad DX12 score of 6269.5 places it near several rivals within a one percent band, confirming it operates at a consistent performance level relative to comparable products in the database. The triple-slot cooler, 285 W draw, and 600 W suggested PSU indicate it requires a substantial power delivery system and chassis space.

The database shows zero direct benchmark wins for either card, so the verdict rests on specifications and the one NVIDIA score. Users who require maximum compute density should select the NVIDIA card, as its recorded benchmark and specification lead are unambiguous. Users who prioritize minimal power draw and compact installation should select the AMD card, as no other card in this comparison approaches its combination of low wattage and small size. The end-of-life status of the NVIDIA card and the active status of the AMD card may influence availability, but the recorded data does not include any performance measurements for the AMD card to weigh against the NVIDIA score.

DETAILED SPECIFICATIONS

SPECIFICATION
PRO W7400
RTX 4070 Ti SUPER AD102
Core Specs
Shading Units
1,792
8,448 +371.4%
Shaders
1,792
8,448 +371.4%
TMUs
112
264 +135.7%
ROPs
64
96 +50.0%
Compute Units
28
—
SM Count
—
66
Clocks
Base Clock
330 MHz
2340 MHz
Boost Clock
1100 MHz
2610 MHz
Memory Clock
1350 MHz 10.8 Gbps effective
1313 MHz 21 Gbps effective
Memory
Memory Size
8 GB
16 GB
VRAM (MB)
8,192
16,384 +100.0%
Memory Type
GDDR6
GDDR6X
Memory Bus
128 bit
256 bit
Bandwidth
172.8 GB/s
672.3 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
2 MB
48 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
70.40 GPixel/s
250.6 GPixel/s
Texture Rate
123.2 GTexel/s
689.0 GTexel/s
FP32 (TFLOPS)
7.885 TFLOPS
44.10 TFLOPS
FP64 (TFLOPS)
246.4 GFLOPS (1:32)
689.0 GFLOPS (1:64)
FP16 (TFLOPS)
7.885 TFLOPS (1:1)
44.10 TFLOPS (1:1)
AI/RT
RT Cores
28
66 +135.7%
Tensor Cores
—
264
Matrix Cores
56
—
Power
TDP
55 W
285 W
TDP (W)
55
285 +418.2%
Suggested PSU
250 W
600 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.0
Ada Lovelace
GPU Name
Navi 33
AD102
Codename
Hotpink Bonefish
—
Generation
Radeon Pro Navi (Navi III Series)
GeForce 40
Process Size
6 nm
5 nm
Transistors
13,300 million
76,300 million
Die Size
204 mm²
609 mm²
Foundry
TSMC
TSMC
Density
65.2M / mm²
125.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
8.9
Shader Model
6.9
6.9
Physical
Slot Width
Single-slot
Triple-slot
Length
168 mm 6.6 inches
310 mm 12.2 inches
Height
69 mm 2.7 inches
140 mm 5.5 inches
Outputs
4x DisplayPort 2.1
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x16
Other
Launch Price
—
799 USD
Production
Active
End-of-life
Predecessor
Radeon Pro Vega
GeForce 30
Successor
—
GeForce 50
View Radeon PRO W7400 Details View GeForce RTX 4070 Ti SUPER AD102 Details