AMD Radeon Pro Vega II vs AMD Radeon RX 9060 XT LP Comparison

AMD
RADEON

AMD Radeon Pro Vega II

CORE STATE Vega 20
VRAM 32 GB
CLOCK SPEED 1720 MHz
TDP 475 W
BUS WIDTH 4096 bit
ARCHITECTURE GCN 5.1
nm
PROCESS 7 nm
LAUNCH DATE 2019
VS
AMD
RADEON

Radeon RX 9060 XT LP

CORE STATE Navi 44
VRAM 16 GB
CLOCK SPEED 3050 MHz
TDP 140 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
130,183
N/A
geekbench_opencl
99,048
88,183
geekbench_vulkan
99,621
39,476

Analysis: AMD Radeon Pro Vega II vs AMD Radeon RX 9060 XT LP

The Verdict

The recorded data presents a clear split between these two AMD graphics cards. The AMD Radeon Pro Vega II wins both head-to-head benchmark comparisons, with a 12.3% lead in Geekbench OpenCL and a dominant 152.4% lead in Geekbench Vulkan. Its average benchmark score of 109617 places it in the 94th percentile of all GPUs, while the AMD Radeon RX 9060 XT LP sits at 63830, which is the 89th percentile. The Pro Vega II also sits just 1% below the AMD Radeon PRO W7900 in the nearest rivals data, showing it remains competitive against much newer professional hardware.

However, the RX 9060 XT LP is not without its own story. It is an active production card from the Radeon RX 9000 series with RDNA 4.0 architecture, while the Pro Vega II is end-of-life. The RX 9060 XT LP delivers 24.99 TFLOPS FP32 performance from a 140 W TDP, whereas the Pro Vega II produces 14.09 TFLOPS FP32 from a 475 W TDP. The data indicates the newer card offers far greater compute per watt, but the older card wins raw benchmark scores. Buyers seeking maximum absolute performance in the tested workloads should select the Pro Vega II. Those who need an actively produced, dual-slot card with modern API support should consider the RX 9060 XT LP, accepting its lower benchmark results.

Architecture Differences

The two cards come from entirely different eras of AMD design. The Pro Vega II uses the Vega 20 chip built on GCN 5.1 architecture, manufactured on a 7 nm process at TSMC. It packs 13,230 million transistors across a 331 mm² die, giving a transistor density of 40.0M per mm². The RX 9060 XT LP uses the Navi 44 chip with RDNA 4.0 architecture, built on a 4 nm process, also at TSMC. It contains 29,700 million transistors on a smaller 199 mm² die, achieving a much higher density of 149.2M per mm².

The memory subsystems are fundamentally different. The Pro Vega II uses 32 GB of HBM2 on a 4096-bit bus, delivering 825.3 GB/s of bandwidth. The RX 9060 XT LP uses 16 GB of GDDR6 on a 128-bit bus, delivering 322.3 GB/s. The Pro Vega II has double the memory capacity and nearly 2.6 times the bandwidth, but the RX 9060 XT LP uses a more common and power-efficient memory type.

Compute resources differ in configuration. The Pro Vega II has 4096 shading units, 256 TMUs, and 64 ROPs, with no dedicated ray tracing cores. The RX 9060 XT LP has 2048 shading units, 128 TMUs, and 64 ROPs, but adds 32 dedicated ray tracing cores. The RDNA 4.0 card supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the GCN 5.1 card supports DirectX 12 (12_1) and Vulkan 1.3. Both support OpenGL 4.6.

Clock behavior also differs sharply. The Pro Vega II has a base clock of 1574 MHz and a boost of 1720 MHz. The RX 9060 XT LP starts lower at 1380 MHz base but boosts to 3050 MHz, with a game clock of 2450 MHz. The newer card relies on high boost clocks to achieve its 24.99 TFLOPS FP32 throughput, while the older card achieves 14.09 TFLOPS from a lower clock but wider execution resources.

The physical and power profiles are extremely different. The Pro Vega II is a quad-slot card with a 475 W TDP and an 850 W suggested PSU, using an Apple MPX bus interface. The RX 9060 XT LP is a dual-slot card with a 140 W TDP, a 300 W suggested PSU, a single 8-pin power connector, and a PCIe 5.0 x16 interface. The Pro Vega II displays through 1x HDMI 2.0b and 4x Thunderbolt, while the RX 9060 XT LP offers 1x HDMI 2.1b and 2x DisplayPort 2.1a.

Head-to-Head Benchmarks

The head-to-head data contains only two shared tests, and the Pro Vega II wins both. In Geekbench OpenCL, the Pro Vega II scores 99048 against 88183 for the RX 9060 XT LP, a 12.3% advantage. This is a meaningful gap but not an overwhelming one. The OpenCL result likely reflects the Pro Vega II's massive memory bandwidth and larger shading unit count, which help in compute-heavy workloads that scale across many parallel lanes.

The Geekbench Vulkan result is far more lopsided. The Pro Vega II scores 99621 while the RX 9060 XT LP manages only 39476, giving the older card a 152.4% lead. This is an enormous difference. Vulkan benchmarking often rewards raw throughput and memory bandwidth, both of which favor the Pro Vega II. The RX 9060 XT LP's score is surprisingly low compared to its OpenCL result, suggesting its Vulkan drivers or architecture configuration do not translate into competitive performance in this specific test.

The average benchmark scores reinforce the gap. The Pro Vega II averages 109617 across its three recorded tests (Geekbench Metal, OpenCL, and Vulkan), while the RX 9060 XT LP averages 63830 across only two tests. The Pro Vega II's nearest rivals include the AMD Radeon PRO W7900 at 110725 (1% higher), the AMD Radeon Pro W6600X at 107342 (2.1% lower), and the AMD Radeon Pro Vega II Duo at 106750 (2.7% lower). The RX 9060 XT LP sits near the NVIDIA CMP 30HX at 63842 (0% difference), the AMD Radeon RX 7600M at 63775 (0.1% higher), and the AMD Radeon Pro Vega 56 at 63693 (0.2% higher).

The percentile data tells a nuanced story. The Pro Vega II is in the 94th percentile of all GPUs, while the RX 9060 XT LP is in the 89th percentile. The five-percentile gap is notable, but the RX 9060 XT LP is still above the vast majority of GPUs in the database. The Pro Vega II's score is closer to professional workstation cards like the PRO W7900, while the RX 9060 XT LP's score aligns with midrange mobile and older workstation parts like the RX 7600M and Pro Vega 56.

FAQ

Q: Which card has the higher average benchmark score?

A: The AMD Radeon Pro Vega II has an average benchmark score of 109617, while the AMD Radeon RX 9060 XT LP averages 63830. The Pro Vega II also holds a higher percentile rank at 94 versus 89.

Q: How large is the performance gap in Vulkan workloads?

A: In Geekbench Vulkan, the Pro Vega II scores 99621 against 39476 for the RX 9060 XT LP, a 152.4% advantage. This is the largest recorded difference between the two cards.

Q: Does the RX 9060 XT LP support ray tracing?

A: Yes, the RX 9060 XT LP includes 32 ray tracing cores. The Pro Vega II has no dedicated ray tracing cores listed in the data.

Q: What memory configurations do the two cards use?

A: The Pro Vega II uses 32 GB of HBM2 on a 4096-bit bus with 825.3 GB/s bandwidth. The RX 9060 XT LP uses 16 GB of GDDR6 on a 128-bit bus with 322.3 GB/s bandwidth.

Q: Which card is still in production?

A: The RX 9060 XT LP has an active production status, while the Pro Vega II is listed as end-of-life. The Pro Vega II was released in 2019, and the RX 9060 XT LP was released in 2025.

Q: How do the FP32 compute figures compare?

A: The RX 9060 XT LP delivers 24.99 TFLOPS FP32, while the Pro Vega II delivers 14.09 TFLOPS. Despite the RX 9060 XT LP's higher FP32 figure, the Pro Vega II wins both recorded head-to-head benchmark tests.

Where Each One Wins

The Pro Vega II wins in raw benchmark performance. It leads by 12.3% in OpenCL and by 152.4% in Vulkan, and it holds a 94th percentile rank compared to the RX 9060 XT LP's 89th. Its 32 GB HBM2 memory with 825.3 GB/s bandwidth makes it suitable for workloads that demand large memory pools and extremely high bandwidth, such as large dataset processing or compute tasks that cannot fit within 16 GB. Its 4096 shading units and 256 TMUs provide wide parallel execution resources that likely explain its strong OpenCL and Vulkan results.

The Pro Vega II also benefits from a wider bus interface (4096-bit versus 128-bit) and a higher pixel rate of 110.1 GPixel/s. Its texture rate of 440.3 GTexel/s also exceeds the RX 9060 XT LP's 390.4 GTexel/s. For users who prioritize maximum performance in the specific Geekbench tests recorded, the Pro Vega II is the clear choice.

The RX 9060 XT LP wins in efficiency and modern features. Its 140 W TDP is dramatically lower than the Pro Vega II's 475 W, and its suggested PSU of 300 W is far below the 850 W required by the older card. It achieves 24.99 TFLOPS FP32 from that lower power draw, suggesting superior compute per watt. Its FP16 performance of 24.99 TFLOPS at a 1:1 ratio matches its FP32 throughput, whereas the Pro Vega II's FP16 of 28.18 TFLOPS uses a 2:1 ratio, meaning it likely sacrifices throughput when running FP16 workloads.

The RX 9060 XT LP also supports newer APIs, including DirectX 12 Ultimate (12_2) and Vulkan 1.4, plus it includes 32 ray tracing cores for hardware-accelerated ray tracing. Its display outputs include HDMI 2.1b and DisplayPort 2.1a, which are newer standards than the Pro Vega II's HDMI 2.0b and Thunderbolt outputs. The dual-slot form factor and PCIe 5.0 x16 interface make it far more practical for modern systems. For users who value active production status, modern feature support, lower power requirements, and a smaller physical footprint, the RX 9060 XT LP is the better fit despite its lower benchmark scores.

Specification Differences

The two cards differ across nearly every major specification category. The Pro Vega II uses the Vega 20 chip with GCN 5.1 architecture, while the RX 9060 XT LP uses Navi 44 with RDNA 4.0. The process node is 7 nm for the Pro Vega II and 4 nm for the RX 9060 XT LP. Transistor counts are 13,230 million versus 29,700 million, die sizes are 331 mm² versus 199 mm², and transistor densities are 40.0M per mm² versus 149.2M per mm².

Clock speeds differ substantially. The Pro Vega II has a 1574 MHz base and 1720 MHz boost, while the RX 9060 XT LP has a 1380 MHz base, 3050 MHz boost, and a 2450 MHz game clock. Memory clocks are 806 MHz (1612 Mbps effective) for the Pro Vega II and 2518 MHz (20.1 Gbps effective) for the RX 9060 XT LP.

Memory capacity, type, bus width, and bandwidth all differ. The Pro Vega II has 32 GB HBM2 on a 4096-bit bus with 825.3 GB/s, while the RX 9060 XT LP has 16 GB GDDR6 on a 128-bit bus with 322.3 GB/s. Shading units are 4096 versus 2048, TMUs are 256 versus 128, and ROPs are 64 versus 64. The RX 9060 XT LP adds 32 ray tracing cores, which the Pro Vega II lacks.

Compute rates differ in both directions. The Pro Vega II has a pixel rate of 110.1 GPixel/s and a texture rate of 440.3 GTexel/s, while the RX 9060 XT LP has a pixel rate of 195.2 GPixel/s and a texture rate of 390.4 GTexel/s. FP32 is 14.09 TFLOPS for the Pro Vega II and 24.99 TFLOPS for the RX 9060 XT LP. FP16 is 28.18 TFLOPS (2:1) for the Pro Vega II and 24.99 TFLOPS (1:1) for the RX 9060 XT LP.

Power and physical specs are starkly different. The Pro Vega II has a 475 W TDP, quad-slot width, no listed power connectors, an 850 W suggested PSU, and an Apple MPX bus interface. The RX 9060 XT LP has a 140 W TDP, dual-slot width, a single 8-pin power connector, a 300 W suggested PSU, and a PCIe 5.0 x16 interface. Display outputs are 1x HDMI 2.0b and 4x Thunderbolt for the Pro Vega II, versus 1x HDMI 2.1b and 2x DisplayPort 2.1a for the RX 9060 XT LP.

API support differs in DirectX and Vulkan versions. The Pro Vega II supports DirectX 12 (12_1) and Vulkan 1.3, while the RX 9060 XT LP supports DirectX 12 Ultimate (12_2) and Vulkan 1.4. Both support OpenGL 4.6. Production status is end-of-life for the Pro Vega II and active for the RX 9060 XT LP. The Pro Vega II has a launch MSRP of 2,199 USD, while the RX 9060 XT LP has no recorded launch MSRP.

DETAILED SPECIFICATIONS

SPECIFICATION
Pro Vega II
RX 9060 XT LP
Core Specs
Shading Units
4,096
2,048 -50.0%
Shaders
4,096
2,048 -50.0%
TMUs
256
128 -50.0%
ROPs
64
64 0.0%
Compute Units
64
32 -50.0%
Clocks
Base Clock
1574 MHz
1380 MHz
Boost Clock
1720 MHz
3050 MHz
Game Clock
—
2450 MHz
Memory Clock
806 MHz 1612 Mbps effective
2518 MHz 20.1 Gbps effective
Memory
Memory Size
32 GB
16 GB
VRAM (MB)
32,768
16,384 -50.0%
Memory Type
HBM2
GDDR6
Memory Bus
4096 bit
128 bit
Bandwidth
825.3 GB/s
322.3 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
4 MB
4 MB
L3 Cache
—
32 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
110.1 GPixel/s
195.2 GPixel/s
Texture Rate
440.3 GTexel/s
390.4 GTexel/s
FP32 (TFLOPS)
14.09 TFLOPS
24.99 TFLOPS
FP64 (TFLOPS)
7.045 TFLOPS (1:2)
780.8 GFLOPS (1:32)
FP16 (TFLOPS)
28.18 TFLOPS (2:1)
24.99 TFLOPS (1:1)
AI/RT
RT Cores
—
32
Matrix Cores
—
64
Power
TDP
475 W
140 W
TDP (W)
475
140 -70.5%
Suggested PSU
850 W
300 W
Power Connectors
—
1x 8-pin
Architecture
Architecture
GCN 5.1
RDNA 4.0
GPU Name
Vega 20
Navi 44
Generation
Radeon Pro Mac (Vega Series)
Navi IV (RX 9000)
Process Size
7 nm
4 nm
Transistors
13,230 million
29,700 million
Die Size
331 mm²
199 mm²
Foundry
TSMC
TSMC
Density
40.0M / mm²
149.2M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
2.1
2.2
Shader Model
6.7
6.9
Physical
Slot Width
Quad-slot
Dual-slot
Outputs
1x HDMI 2.0b4x Thunderbolt
1x HDMI 2.1b2x DisplayPort 2.1a
Bus Interface
Apple MPX
PCIe 5.0 x16
Other
Launch Price
2,199 USD
—
Production
End-of-life
Active
Predecessor
—
Navi III
View Radeon Pro Vega II Details View Radeon RX 9060 XT LP Details