AMD Radeon PRO V710 vs AMD Radeon Pro WX 8200 Comparison
AMD Radeon PRO V710
Radeon Pro WX 8200
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO V710 vs AMD Radeon Pro WX 8200
The AMD Radeon Pro WX 8200 and AMD Radeon PRO V710 represent two distinct eras of AMD professional graphics, separated by six years of architectural evolution. The data reveals a stark contrast: the older WX 8200, built on 14nm GCN 5.0, posts an average benchmark score of 69,870, while the newer PRO V710, on 5nm RDNA 3.0, achieves an average of 58,657. Despite the PRO V710’s lower aggregate score, its single head-to-head benchmark—Geekbench OpenCL—shows it delivering 116,460 points versus the WX 8200’s 69,774, a 40.1% advantage. This paradox—where the newer card wins the direct comparison yet loses the average—is the central puzzle of this analysis, driven by differing benchmark suites and architectural priorities.
The Verdict
The data splits the professional market into two clear camps. For compute-heavy workloads that leverage OpenCL, the AMD Radeon PRO V710 is the unequivocal choice—its 116,460 Geekbench OpenCL score crushes the WX 8200’s 69,774, a 40.1% delta that cannot be ignored. This is a generational leap in raw compute throughput, supported by the PRO V710’s 27.65 TFLOPS FP32 performance, which is 157% higher than the WX 8200’s 10.75 TFLOPS. The PRO V710 also brings modern features absent from the older card, including 54 ray tracing cores and support for DirectX 12 Ultimate (12_2), making it the only viable option for ray-traced workflows.
However, the WX 8200 is not without its own territory. Its average benchmark score of 69,870 places it in the 90th percentile of all GPUs, compared to the PRO V710’s 88th percentile. The WX 8200 also edges out its nearest rival, the NVIDIA Quadro P6000 (69,986), by a razor-thin 0.2%, while the PRO V710’s nearest rival, the NVIDIA P102-100 (58,528), sits just 0.2% behind. This suggests the WX 8200 competes in a higher-performing tier on aggregate, likely due to its superior memory bandwidth (512.0 GB/s versus 504.0 GB/s) and 2048-bit bus, which benefit certain legacy applications. For users running older software optimized for GCN or requiring display outputs—the WX 8200 offers 4x mini-DisplayPort 1.4a while the PRO V710 has none—the older card remains relevant despite its end-of-life status.
The verdict hinges on workload recency. If the application is OpenCL-centric and modern, the PRO V710 wins outright. If the workload is legacy, display-dependent, or relies on broader benchmark diversity, the WX 8200’s higher percentile and average score make it the safer bet. The PRO V710’s single benchmark datapoint is a limitation; its 58,657 average is dragged down by a 3DMark Steel Nomad DX12 score of just 853, which may not reflect real-world professional tasks.
Architecture Differences
The two GPUs are architectural opposites. The WX 8200 uses the Vega 10 chip on GlobalFoundries’ 14nm process, packing 12,500 million transistors into a 495 mm² die, yielding a transistor density of 25.3M per mm². Its GCN 5.0 architecture dates to 2018 and features 3,584 shading units, 224 TMUs, and 64 ROPs. The PRO V710, in contrast, uses the Navi 32 chip on TSMC’s 5nm node, with 28,100 million transistors in a smaller 346 mm² die—a density of 81.2M per mm², over three times higher. Its RDNA 3.0 architecture, released in 2024, has 3,456 shading units (slightly fewer), 216 TMUs, but significantly more ROPs at 96.
The memory subsystems diverge dramatically. The WX 8200 uses 8 GB of HBM2 on a 2048-bit bus, achieving 512.0 GB/s bandwidth. The PRO V710 uses 28 GB of GDDR6 on a 224-bit bus, with 504.0 GB/s bandwidth—nearly identical throughput but with 3.5 times the capacity. Clock speeds also favor the newer card: the PRO V710’s base clock of 1900 MHz and boost of 2000 MHz far exceed the WX 8200’s 1200 MHz base and 1500 MHz boost.
Feature sets show the generational gap. The PRO V710 includes 54 RT cores, DirectX 12 Ultimate support, and Vulkan 1.4, while the WX 8200 lacks RT cores and peaks at DirectX 12 (12_1) with Vulkan 1.3. The PRO V710’s FP16 performance is 27.65 TFLOPS at a 1:1 ratio, whereas the WX 8200’s 21.50 TFLOPS FP16 is a 2:1 ratio, indicating the older card halves FP16 throughput. The PRO V710 also supports PCIe 4.0 x16 versus the WX 8200’s PCIe 3.0 x16, and it draws less power—158 W TDP versus 230 W—while requiring a single 8-pin connector instead of a 6-pin plus 8-pin.
FAQ
Q: Which card has higher raw compute performance?
A: The AMD Radeon PRO V710 delivers 27.65 TFLOPS FP32, which is 157% higher than the WX 8200’s 10.75 TFLOPS. Its FP16 performance is also 27.65 TFLOPS at a 1:1 ratio, versus the WX 8200’s 21.50 TFLOPS at a 2:1 ratio, meaning the PRO V710 maintains full throughput for half-precision work.
Q: Why does the WX 8200 have a higher average benchmark score?
A: The WX 8200’s 69,870 average is based on three Geekbench tests (Metal, OpenCL, and Vulkan) with scores of 70,759, 69,774, and 69,076, respectively. The PRO V710’s 58,657 average includes a Geekbench OpenCL score of 116,460 and a 3DMark Steel Nomad DX12 score of 853, with the latter likely dragging down the aggregate.
Q: Which card supports ray tracing?
A: Only the AMD Radeon PRO V710 includes 54 RT cores. The WX 8200 has no RT cores, making it unsuitable for hardware-accelerated ray tracing workloads.
Q: How do memory capacities compare?
A: The PRO V710 offers 28 GB of GDDR6, a 250% increase over the WX 8200’s 8 GB of HBM2. Despite this, their bandwidth is nearly identical at 504.0 GB/s versus 512.0 GB/s, respectively.
Q: Can the PRO V710 drive displays?
A: No. The PRO V710 has no display outputs, while the WX 8200 provides 4x mini-DisplayPort 1.4a. The PRO V710 is designed for compute or render-farm use where display output is unnecessary.
Q: What are the power requirements?
A: The PRO V710 has a 158 W TDP and requires a 450 W PSU with one 8-pin connector. The WX 8200 has a 230 W TDP, a 550 W PSU recommendation, and needs a 6-pin plus 8-pin connector setup.
Specification Differences
| Specification | AMD Radeon Pro WX 8200 | AMD Radeon PRO V710 |
|---|---|---|
| Chip | Vega 10 | Navi 32 |
| Architecture | GCN 5.0 | RDNA 3.0 |
| Process Node | 14 nm (GlobalFoundries) | 5 nm (TSMC) |
| Transistors | 12,500 million | 28,100 million |
| Die Size | 495 mm² | 346 mm² |
| Transistor Density | 25.3M / mm² | 81.2M / mm² |
| Base Clock | 1200 MHz | 1900 MHz |
| Boost Clock | 1500 MHz | 2000 MHz |
| Memory Size | 8 GB HBM2 | 28 GB GDDR6 |
| Memory Bus | 2048 bit | 224 bit |
| Memory Bandwidth | 512.0 GB/s | 504.0 GB/s |
| Shading Units | 3584 | 3456 |
| TMUs | 224 | 216 |
| ROPs | 64 | 96 |
| RT Cores | None | 54 |
| Pixel Rate | 96.00 GPixel/s | 192.0 GPixel/s |
| Texture Rate | 336.0 GTexel/s | 432.0 GTexel/s |
| FP32 | 10.75 TFLOPS | 27.65 TFLOPS |
| FP16 | 21.50 TFLOPS (2:1) | 27.65 TFLOPS (1:1) |
| TDP | 230 W | 158 W |
| Slot Width | Dual-slot | Single-slot |
| Power Connectors | 1x 6-pin + 1x 8-pin | 1x 8-pin |
| Suggested PSU | 550 W | 450 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |
| Display Outputs | 4x mini-DisplayPort 1.4a | None |
| DirectX | 12 (12_1) | 12 Ultimate (12_2) |
| Vulkan | 1.3 | 1.4 |
| Release Date | 2018-08-12 | 2024-10-02 |
| Production Status | End-of-life | Not specified |
Head-to-Head Benchmarks
The only direct comparison available is Geekbench OpenCL, and it is decisive. The PRO V710 scores 116,460, while the WX 8200 manages 69,774—a 40.1% difference. This aligns with the FP32 compute gap: 27.65 TFLOPS versus 10.75 TFLOPS. The PRO V710’s superiority likely stems from its higher clocks (2000 MHz boost versus 1500 MHz) and the RDNA 3.0 architecture’s improved instruction efficiency, despite having 128 fewer shading units (3,456 versus 3,584).
The WX 8200’s counter-argument comes from its aggregate benchmark performance. Its Geekbench Metal score of 70,759 and Vulkan score of 69,076 are within 1.4% of its OpenCL result, showing consistent performance across APIs. The PRO V710 lacks comparable Metal and Vulkan scores, so its OpenCL dominance cannot be extrapolated. The WX 8200’s 90th percentile ranking versus the PRO V710’s 88th suggests that in a broader benchmark context—including rasterization and varied synthetic tests—the older card holds its ground.
In nearest-rival comparisons, the WX 8200’s 69,870 average sits between the NVIDIA CMP 90HX (69,000, 1.3% behind) and the AMD Radeon RX 6600 LE (70,829, 1.4% ahead). The PRO V710’s 58,657 average is tightly clustered with the NVIDIA P102-100 (58,528, 0.2% behind) and AMD Radeon RX 6950 XT (58,392, 0.5% ahead). This indicates the WX 8200 competes in a faster tier overall, likely due to its HBM2 memory’s lower latency for certain workloads, even though the PRO V710 wins the compute-centric test.
Where Each One Wins
The PRO V710 wins decisively in compute throughput. Its 40.1% OpenCL lead, 157% higher FP32, and double the pixel rate (192.0 GPixel/s versus 96.00 GPixel/s) make it the choice for AI inference, scientific simulation, or any OpenCL-accelerated task. The 28 GB memory capacity is a massive advantage for large datasets that exceed the WX 8200’s 8 GB, and the 54 RT cores enable ray-traced rendering that the WX 8200 cannot perform. Its lower 158 W TDP and single-slot design also suit dense server deployments, though the lack of display outputs means it must be paired with a separate GPU for visualization.
The WX 8200 wins on legacy compatibility and display-centric workflows. Its 4x mini-DisplayPort 1.4a outputs allow direct monitor connectivity, which the PRO V710 lacks entirely. Its higher 90th percentile ranking and closer rivalry with the NVIDIA Quadro P6000 (within 0.2%) suggest better overall performance in a mixed benchmark environment, potentially benefiting applications that use Vulkan (where the PRO V710 has no score) or Metal (exclusive to the WX 8200’s test suite). The 2048-bit HBM2 bus, despite lower capacity, provides bandwidth parity with the PRO V710, which may favor memory-latency-sensitive legacy code written for GCN architecture. For users running older professional software that predates RDNA 3.0 optimizations, the WX 8200’s end-of-life status is less concerning than the PRO V710’s unproven compatibility with such tools.