AMD Instinct MI300X vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison

AMD
RADEON

AMD Instinct MI300X

CORE STATE Aqua Vanjaram
VRAM 192 GB
CLOCK SPEED 2100 MHz
TDP 750 W
BUS WIDTH 8192 bit
ARCHITECTURE CDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti AD104

CORE STATE AD104
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
317,994
N/A

Analysis: AMD Instinct MI300X vs NVIDIA GeForce RTX 4060 Ti AD104

Head-to-Head Benchmarks

The recorded data shows only one benchmark result for this pairing: the AMD Instinct MI300X scores 317,994 in Geekbench OpenCL, while the NVIDIA GeForce RTX 4060 Ti AD104 has no recorded benchmark score in the database. This makes a direct numerical comparison impossible from the available measurements. The MI300X therefore holds the only recorded win in this comparison, with a score that places it in the 100th percentile of all GPUs in the database.

The MI300X's nearest rivals provide context for its performance. The NVIDIA H200 NVL scores 334,891, which is 5% higher than the MI300X. The NVIDIA B200 scores 345,482, placing it 8% above the MI300X. On the other side, the NVIDIA L40S scores 295,763, which is 7.5% lower than the MI300X, and the NVIDIA RTX 6000 Ada Generation scores 287,237, which is 10.7% lower. The MI300X sits between these accelerators in the recorded data, closer to the high-end H200 and B200 than to the L40S and RTX 6000 Ada Generation.

The RTX 4060 Ti AD104 has no benchmark entries in the database and no nearest rivals recorded, so its performance percentile of 50 indicates a mid-pack position among all GPUs, but no specific scores are available to quantify its standing relative to the MI300X. The data set is therefore asymmetric: one side has a single, fully contextualized score, the other has none.

Where Each One Wins

The AMD Instinct MI300X wins in every measured category for which data exists. Its 317,994 Geekbench OpenCL score is the only recorded benchmark result in this comparison, and it stands in the 100th percentile of all GPUs. The MI300X also wins on raw compute resources: 19,456 shading units versus 4,352, 1,216 texture mapping units versus 136, and an FP32 throughput of 81.72 TFLOPS versus 22.06 TFLOPS. Its texture rate of 2,553.6 GTexel/s dwarfs the RTX 4060 Ti AD104's 344.8 GTexel/s.

The NVIDIA GeForce RTX 4060 Ti AD104 wins in areas that the data can support. It has a pixel rate of 121.7 GPixel/s while the MI300X records 0 MPixel/s. The RTX 4060 Ti AD104 has 48 ROPs, while the MI300X lists 0. The RTX 4060 Ti AD104 has 34 RT cores and 136 tensor cores, while the MI300X lists none for both categories. The RTX 4060 Ti AD104 also has display outputs (1x HDMI 2.13x DisplayPort 1.4a), while the MI300X has no outputs at all.

The use-case split follows these resource differences. The MI300X is positioned for compute-heavy workloads that leverage massive FP32 and FP16 throughput, high texture throughput, and a 192 GB HBM3 memory pool. The RTX 4060 Ti AD104 is positioned for graphics output, rasterization through its ROPs and pixel rate, and ray tracing through its RT cores. The data indicates the MI300X is a compute accelerator with no display path, while the RTX 4060 Ti AD104 is a graphics card with a full display interface.

FAQ

Q: What is the only recorded benchmark score in this comparison?

A: The AMD Instinct MI300X scores 317,994 in Geekbench OpenCL. The NVIDIA GeForce RTX 4060 Ti AD104 has no recorded benchmark scores in the database.

Q: How does the MI300X compare to its nearest rival, the NVIDIA H200 NVL?

A: The H200 NVL scores 334,891, which is 5% higher than the MI300X's 317,994.

Q: Does the RTX 4060 Ti AD104 support ray tracing?

A: Yes, it has 34 RT cores. The MI300X lists no RT cores.

Q: Which GPU has more memory bandwidth?

A: The MI300X has 5.32 TB/s of bandwidth from its 8192-bit HBM3 memory bus, while the RTX 4060 Ti AD104 has 288.0 GB/s from its 128-bit GDDR6 bus.

Q: What is the RTX 4060 Ti AD104's percentile ranking?

A: It sits in the 50th percentile of all GPUs in the database, though no specific benchmark scores are recorded for it.

Q: Which GPU has display outputs?

A: Only the RTX 4060 Ti AD104, with 1x HDMI 2.13x DisplayPort 1.4a. The MI300X has no outputs.

Specification Differences

The two GPUs differ across nearly every specification field. The MI300X uses 153,000 million transistors on a 1017 mm² die, while the RTX 4060 Ti AD104 uses 35,800 million transistors on a 294 mm² die. Transistor density is 150.4M per mm² for the MI300X and 121.8M per mm² for the RTX 4060 Ti AD104.

Clock speeds differ substantially. The MI300X has a base clock of 1000 MHz and a boost clock of 2100 MHz, while the RTX 4060 Ti AD104 has a base clock of 2310 MHz and a boost clock of 2535 MHz. Memory clocks are 1300 MHz (5.2 Gbps effective) for the MI300X and 2250 MHz (18 Gbps effective) for the RTX 4060 Ti AD104.

Memory configurations are radically different. The MI300X has 192 GB of HBM3 on an 8192-bit bus with 5.32 TB/s bandwidth. The RTX 4060 Ti AD104 has 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth.

Compute resources: the MI300X has 19,456 shading units, 1,216 TMUs, and 0 ROPs. The RTX 4060 Ti AD104 has 4,352 shading units, 136 TMUs, and 48 ROPs. The MI300X has no RT cores or tensor cores listed, while the RTX 4060 Ti AD104 has 34 RT cores and 136 tensor cores.

Pixel and texture rates: the MI300X records 0 MPixel/s and 2,553.6 GTexel/s. The RTX 4060 Ti AD104 records 121.7 GPixel/s and 344.8 GTexel/s. FP32 and FP16 throughput are both 81.72 TFLOPS for the MI300X and 22.06 TFLOPS for the RTX 4060 Ti AD104.

Power and physical specs differ widely. The MI300X has a TDP of 750 W, is an OAM Module with no power connectors, and suggests a 1150 W PSU. The RTX 4060 Ti AD104 has a TDP of 160 W, is Dual-slot, uses a 1x 16-pin connector, and suggests a 450 W PSU. The MI300X uses PCIe 5.0 x16, while the RTX 4060 Ti AD104 uses PCIe 4.0 x8.

The RTX 4060 Ti AD104 has dimensions of 240 mm length, 111 mm height, and 40 mm width. The MI300X has no recorded dimensions. The RTX 4060 Ti AD104 has a launch MSRP of 399 USD. The MI300X has no launch MSRP recorded.

Architecture Differences

The MI300X is built on CDNA 3.0 architecture with the Aqua Vanjaram chip, part of the Instinct (MIx) generation. The RTX 4060 Ti AD104 is built on Ada Lovelace architecture with the AD104 chip, part of the GeForce 40-generation. Both use a 5 nm process from TSMC, but the similarity ends there.

The MI300X is a compute accelerator with no display outputs, no DirectX, OpenGL, or Vulkan API support listed. The RTX 4060 Ti AD104 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and provides 1x HDMI 2.13x DisplayPort 1.4a outputs.

The MI300X's memory architecture uses HBM3 with an 8192-bit bus width, enabling 5.32 TB/s bandwidth. The RTX 4060 Ti AD104 uses GDDR6 with a 128-bit bus, delivering 288.0 GB/s. This reflects the MI300X's data-center orientation versus the RTX 4060 Ti AD104's consumer graphics orientation.

Feature sets diverge on acceleration hardware. The RTX 4060 Ti AD104 includes 34 RT cores and 136 tensor cores, which the MI300X does not list. The MI300X compensates with far higher shading unit counts and FP32 throughput. The RTX 4060 Ti AD104 has a production status of End-of-life, with the GeForce 50 as its successor. The MI300X has no production status recorded and no successor listed.

Release dates differ: the MI300X launched on 2023-12-05, while the RTX 4060 Ti AD104 launched on 2024-03-31. The MI300X's predecessor is Radeon Instinct, while the RTX 4060 Ti AD104's predecessor is GeForce 30.

The Verdict

The data supports a clear split. The AMD Instinct MI300X is the compute performer, with a 317,994 Geekbench OpenCL score in the 100th percentile of all GPUs, 81.72 TFLOPS of FP32 throughput, 192 GB of HBM3 memory, and 5.32 TB/s of bandwidth. It is positioned among accelerators like the NVIDIA H200 NVL, which scores 5% higher, and the NVIDIA B200, which scores 8% higher, while leading the NVIDIA L40S by 7.5% and the NVIDIA RTX 6000 Ada Generation by 10.7%.

The NVIDIA GeForce RTX 4060 Ti AD104 is the graphics-oriented card, with 48 ROPs, a 121.7 GPixel/s pixel rate, 34 RT cores, 136 tensor cores, and display outputs. It has no recorded benchmark scores, so its actual compute performance relative to the MI300X cannot be quantified from the database. Its 50th percentile ranking places it mid-pack among all GPUs, but no specific measurements exist to compare directly against the MI300X.

The choice between these two depends entirely on workload requirements, as the data shows no overlap in their design targets. The MI300X delivers compute throughput at the high end of the database's recorded results, while the RTX 4060 Ti AD104 provides graphics features, ray tracing, and display connectivity that the MI300X lacks entirely. The MI300X requires a 750 W TDP, an OAM module form factor, and a 1150 W suggested PSU, while the RTX 4060 Ti AD104 fits in a dual-slot card with a 160 W TDP and 450 W suggested PSU. The MI300X is for compute tasks that can use its massive memory pool and throughput. The RTX 4060 Ti AD104 is for graphics workloads that need rasterization, ray tracing, and output to displays.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI300X
RTX 4060 Ti AD104
Core Specs
Shading Units
19,456
4,352 -77.6%
Shaders
19,456
4,352 -77.6%
TMUs
1,216
136 -88.8%
ROPs
0
48 +∞%
Compute Units
304
—
SM Count
—
34
Clocks
Base Clock
1000 MHz
2310 MHz
Boost Clock
2100 MHz
2535 MHz
Memory Clock
1300 MHz 5.2 Gbps effective
2250 MHz 18 Gbps effective
Memory
Memory Size
192 GB
8 GB
VRAM (MB)
196,608
8,192 -95.8%
Memory Type
HBM3
GDDR6
Memory Bus
8192 bit
128 bit
Bandwidth
5.32 TB/s
288.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
16 MB
32 MB
L3 Cache
256 MB
—
Performance
Pixel Rate
0 MPixel/s
121.7 GPixel/s
Texture Rate
2,553.6 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
81.72 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
40.86 TFLOPS (1:2)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
81.72 TFLOPS (1:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
—
34
Tensor Cores
—
136
Matrix Cores
1,216
—
Power
TDP
750 W
160 W
TDP (W)
750
160 -78.7%
Suggested PSU
1150 W
450 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
CDNA 3.0
Ada Lovelace
GPU Name
Aqua Vanjaram
AD104
Generation
Instinct (MIx)
GeForce 40
Process Size
5 nm
5 nm
Transistors
153,000 million
35,800 million
Die Size
1017 mm²
294 mm²
Foundry
TSMC
TSMC
Density
150.4M / mm²
121.8M / mm²
AMD MCM
MCM
2
—
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
8.9
Shader Model
—
6.9
Physical
Slot Width
OAM Module
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
—
End-of-life
Predecessor
Radeon Instinct
GeForce 30
Successor
—
GeForce 50
View Instinct MI300X Details View GeForce RTX 4060 Ti AD104 Details