AMD Instinct MI300X vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison
AMD Instinct MI300X
GeForce RTX 4070 Ti SUPER AD102
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
The Verdict
The AMD Instinct MI300X and NVIDIA GeForce RTX 4070 Ti SUPER AD102 occupy entirely separate segments of the GPU market, and the recorded data reflects this divergence. The Instinct MI300X is a compute-oriented accelerator designed for data center workloads, while the RTX 4070 Ti SUPER AD102 is a consumer graphics card with rendering and display capabilities. The benchmark data confirms this split: the Instinct MI300X posts a Geekbench OpenCL score of 317,994, which places it in the 100th percentile of all GPUs in the database. The RTX 4070 Ti SUPER AD102 delivers a 3DMark Steel Nomad DX12 score of 6,269.5, placing it in the 36th percentile. These are different tests measuring different capabilities, so direct numerical comparison is not meaningful. Instead, the verdict hinges on workload requirements. The Instinct MI300X is the choice for high-throughput compute tasks, as its nearest rivals include the NVIDIA H200 NVL (5% higher score), NVIDIA B200 (8% higher score), NVIDIA L40S (7.5% lower score), and NVIDIA RTX 6000 Ada Generation (10.7% lower score). The RTX 4070 Ti SUPER AD102 is the pick for desktop graphics, with its nearest rivals showing a near-tie: the RTX 5070 Ti SUPER scores identically (0% delta), the Quadro K620 is 0.2% lower, the FirePro W600 is 0.8% higher, and the Radeon R7 M350 is 0.9% lower. The data shows no head-to-head benchmark overlap, reinforcing that these products are not competitors.
Architecture Differences
The two GPUs use fundamentally different architectures from different vendors. The Instinct MI300X is built on AMD's CDNA 3.0 architecture, while the RTX 4070 Ti SUPER AD102 uses NVIDIA's Ada Lovelace architecture. Both are manufactured on a 5 nm process at TSMC, but the chip designs diverge sharply. The MI300X uses the Aqua Vanjaram chip with a die size of 1017 mm² and 153,000 million transistors, yielding a transistor density of 150.4M per mm². The RTX 4070 Ti SUPER AD102 uses the AD102 chip with a die size of 609 mm² and 76,300 million transistors, yielding a density of 125.3M per mm². The MI300X packs more than twice the transistors onto a die that is nearly 67% larger, indicating a design optimized for massive parallel compute rather than compactness.
Memory technology also differs completely. The MI300X uses 192 GB of HBM3 with an 8192-bit bus and 5.32 TB/s bandwidth, while the RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X with a 256-bit bus and 672.3 GB/s bandwidth. The MI300X has eight times the memory capacity and roughly eight times the bandwidth, which reflects its data center role. The RTX 4070 Ti SUPER AD102 includes 66 RT cores and 264 tensor cores, plus 96 ROPs, while the MI300X lists no RT cores, no tensor cores, and 0 ROPs with a pixel rate of 0 MPixel/s. The MI300X is purely a compute device with no display outputs, whereas the RTX 4070 Ti SUPER AD102 offers 1x HDMI 2.1 and 3x DisplayPort 1.4a outputs. The MI300X also lacks DirectX, OpenGL, and Vulkan API support, while the RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
FAQ
Q: Which GPU has more shading units?
A: The AMD Instinct MI300X has 19,456 shading units, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 has 8,448 shading units. The MI300X also has 1,216 TMUs compared to 264 TMUs on the RTX 4070 Ti SUPER AD102.
Q: What are the clock speeds of each GPU?
A: The Instinct MI300X runs at a base clock of 1000 MHz and a boost clock of 2100 MHz. The RTX 4070 Ti SUPER AD102 runs at a base clock of 2340 MHz and a boost clock of 2610 MHz. The NVIDIA card has higher clock speeds, while the AMD card compensates with far more compute units.
Q: How do their power requirements compare?
A: The Instinct MI300X has a TDP of 750 W and a suggested PSU of 1150 W, with no power connectors listed because it uses an OAM Module slot width. The RTX 4070 Ti SUPER AD102 has a TDP of 285 W, a suggested PSU of 600 W, and uses a single 16-pin connector.
Q: What is the release date for each product?
A: The AMD Instinct MI300X was released on December 5, 2023. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 was released on June 9, 2024, and its production status is listed as end-of-life, with the GeForce 50 series as its successor.
Q: Which GPU has better memory bandwidth?
A: The Instinct MI300X has a memory bandwidth of 5.32 TB/s, which is substantially higher than the 672.3 GB/s of the RTX 4070 Ti SUPER AD102. The MI300X also has a much wider memory bus at 8192 bits versus 256 bits.
Q: What is the bus interface of each GPU?
A: The Instinct MI300X uses PCIe 5.0 x16, while the RTX 4070 Ti SUPER AD102 uses PCIe 4.0 x16. The AMD accelerator also has no display outputs, while the NVIDIA card has HDMI and DisplayPort outputs.
Specification Differences
The database records show the following differences between the two GPUs:
- Architecture: CDNA 3.0 (AMD) versus Ada Lovelace (NVIDIA)
- Transistors: 153,000 million (MI300X) versus 76,300 million (RTX 4070 Ti SUPER)
- Die size: 1017 mm² versus 609 mm²
- Transistor density: 150.4M / mm² versus 125.3M / mm²
- Base clock: 1000 MHz versus 2340 MHz
- Boost clock: 2100 MHz versus 2610 MHz
- Memory clock: 1300 MHz 5.2 Gbps effective versus 1313 MHz 21 Gbps effective
- Memory size: 192 GB HBM3 versus 16 GB GDDR6X
- Memory bus width: 8192 bit versus 256 bit
- Memory bandwidth: 5.32 TB/s versus 672.3 GB/s
- Shading units: 19,456 versus 8,448
- TMUs: 1,216 versus 264
- ROPs: 0 versus 96
- RT cores: not listed versus 66
- Tensor cores: not listed versus 264
- Pixel rate: 0 MPixel/s versus 250.6 GPixel/s
- Texture rate: 2,553.6 GTexel/s versus 689.0 GTexel/s
- FP32 performance: 81.72 TFLOPS versus 44.10 TFLOPS
- FP16 performance: 81.72 TFLOPS (1:1) versus 44.10 TFLOPS (1:1)
- TDP: 750 W versus 285 W
- Slot width: OAM Module versus Triple-slot
- Power connectors: None versus 1x 16-pin
- Suggested PSU: 1150 W versus 600 W
- Bus interface: PCIe 5.0 x16 versus PCIe 4.0 x16
- Display outputs: No outputs versus 1x HDMI 2.1, 3x DisplayPort 1.4a
- DirectX: N/A versus 12 Ultimate (12_2)
- OpenGL: N/A versus 4.6
- Vulkan: N/A versus 1.4
- Dimensions: not listed versus 310 mm x 140 mm x 61 mm
- Release date: December 5, 2023 versus June 9, 2024
- Predecessor: Radeon Instinct versus GeForce 30
- Successor: not listed versus GeForce 50
- Launch MSRP: not listed versus 799 USD
Head-to-Head Benchmarks
The database contains no head-to-head benchmark entries for these two products, and the wins count is zero for both. Instead, each GPU has its own benchmark record from different test suites. The Instinct MI300X was tested with Geekbench OpenCL and scored 317,994. This score puts it in the 100th percentile of all GPUs in the database, meaning no other recorded GPU scores higher. Its nearest rival, the NVIDIA H200 NVL, scores 334,891, which is 5% higher. The NVIDIA B200 scores 345,482, 8% higher. The NVIDIA L40S scores 295,763, which is 7.5% lower than the MI300X, and the NVIDIA RTX 6000 Ada Generation scores 287,237, which is 10.7% lower. The MI300X therefore sits in a competitive cluster of data center accelerators, with the closest rival being 5% ahead and the closest behind being 7.5% behind.
The RTX 4070 Ti SUPER AD102 was tested with 3DMark Steel Nomad DX12 and scored 6,269.5. Its percentile rank is 36, which places it below the median of all GPUs in the database. Its nearest rivals are tightly grouped: the RTX 5070 Ti SUPER scores exactly 6,270, a 0% difference. The Quadro K620 scores 6,282, which is 0.2% higher. The FirePro W600 scores 6,223, which is 0.8% lower. The Radeon R7 M350 scores 6,327, which is 0.9% higher. These extremely small deltas indicate that the RTX 4070 Ti SUPER AD102 is positioned at a performance level where many GPUs cluster within a 1% range, suggesting a saturated performance tier in the database.
The MI300X has a much larger performance gap to its nearest rivals, with deltas ranging from 5% to 10.7%. This indicates that the MI300X occupies a performance tier with fewer close competitors, and the differences between data center accelerators are more pronounced. The RTX 4070 Ti SUPER AD102, by contrast, sits in a crowded field where even older and lower-end models like the Quadro K620 and Radeon R7 M350 are within 1% of its score, according to the recorded data.
Where Each One Wins
The Instinct MI300X wins decisively in raw compute throughput. Its FP32 performance of 81.72 TFLOPS is nearly double the 44.10 TFLOPS of the RTX 4070 Ti SUPER AD102, and its FP16 performance matches FP32 at a 1:1 ratio, also 81.72 TFLOPS versus 44.10 TFLOPS. The texture rate of 2,553.6 GTexel/s is roughly 3.7 times the 689.0 GTexel/s of the RTX 4070 Ti SUPER AD102. The MI300X also wins on memory capacity and bandwidth by a wide margin: 192 GB versus 16 GB, and 5.32 TB/s versus 672.3 GB/s. These specifications indicate that the MI300X is designed for workloads that require massive data throughput, such as large-scale machine learning training or scientific simulation, where the 8192-bit memory bus and HBM3 memory provide a decisive advantage.
The RTX 4070 Ti SUPER AD102 wins in areas related to graphics rendering and display. It has 96 ROPs and a pixel rate of 250.6 GPixel/s, while the MI300X has no ROPs and a pixel rate of 0 MPixel/s. The NVIDIA card supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the MI300X lists no graphics APIs. The RTX 4070 Ti SUPER AD102 also includes 66 RT cores and 264 tensor cores, which the MI300X does not list. These features enable real-time ray tracing, DLSS-style acceleration, and general graphics output. The NVIDIA card also has display outputs, making it usable for desktop, workstation, or gaming scenarios. Its lower TDP of 285 W versus 750 W, and its triple-slot form factor versus the OAM Module of the MI300X, indicate that the RTX 4070 Ti SUPER AD102 is intended for conventional PC installations, while the MI300X is a data center module.
The clock speeds also favor the NVIDIA card: a base clock of 2340 MHz and boost of 2610 MHz, compared to 1000 MHz and 2100 MHz for the AMD accelerator. However, the MI300X compensates with 19,456 shading units versus 8,448, which explains its higher FP32 and texture rates despite lower clocks. The benchmark ranking further clarifies the split: the MI300X sits at the 100th percentile, while the RTX 4070 Ti SUPER AD102 sits at the 36th percentile. The MI300X's nearest rivals are all data center accelerators (H200 NVL, B200, L40S, RTX 6000 Ada), while the RTX 4070 Ti SUPER AD102's nearest rivals include a mix of consumer and older workstation cards. The data confirms that the MI300X wins for compute-centric, server-side workloads, while the RTX 4070 Ti SUPER AD102 wins for graphics-centric, client-side workloads. There is no overlap in benchmark tests, so the database provides no direct comparison between the two, but the architectural specifications and percentile rankings make the intended use cases clear.