AMD Instinct MI300X vs AMD Radeon RX 6750 GRE 12 GB Comparison
AMD Instinct MI300X
Radeon RX 6750 GRE 12 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs AMD Radeon RX 6750 GRE 12 GB
Where Each One Wins
The AMD Instinct MI300X and the AMD Radeon RX 6750 GRE 12 GB occupy entirely separate corners of the hardware spectrum, and the recorded data makes that split unmistakable. The MI300X is a compute accelerator with a single benchmark entry in the database, a Geekbench OpenCL score of 317,994, which places it at the 100th percentile among all GPUs tracked. That is an absolute top-of-stack result, one that puts it ahead of every other recorded device in the database. The RX 6750 GRE, by contrast, shows its strength in different arenas: its Geekbench Vulkan score of 108,994 and its 3DMark Steel Nomad DX12 score of 2,402 place it at the 87th percentile overall, a strong but not dominant position.
The win condition for each product is therefore defined by workload type rather than by raw performance alone. The MI300X wins in compute-heavy, API-agnostic scenarios where OpenCL throughput is the deciding factor. Its 317,994 OpenCL score is not just high, it is the highest recorded value in the database, and the nearest rival, the NVIDIA H200 NVL, trails by 5 percent with an average score of 334,891. The RX 6750 GRE wins in graphics-oriented tasks that rely on modern API support, particularly Vulkan and DirectX 12 Ultimate, areas where the MI300X has no presence at all. The MI300X lists no DirectX, OpenGL, or Vulkan support, while the RX 6750 GRE supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. So the use-case split is stark: the MI300X is for compute acceleration without display or graphics duties, while the RX 6750 GRE is for conventional rendering workloads with full API compatibility.
Architecture Differences
The two chips share a manufacturer but diverge in nearly every architectural decision. The MI300X uses the CDNA 3.0 architecture on a 5 nm process from TSMC, built around the Aqua Vanjaram chip. The RX 6750 GRE uses the RDNA 2.0 architecture on a 7 nm process from TSMC, built around the Navi 22 chip. The process node difference alone, 5 nm versus 7 nm, explains part of the massive transistor count disparity: the MI300X packs 153,000 million transistors on a 1017 mm² die, while the RX 6750 GRE has 17,200 million transistors on a 335 mm² die. Transistor density tells the same story, with the MI300X at 150.4M per mm² versus the RX 6750 GRE at 51.3M per mm².
The compute resources follow the same pattern. The MI300X has 19,456 shading units and 1,216 texture mapping units, but zero raster operations pipelines, which is consistent with a part that has no display outputs. The RX 6750 GRE has 2,560 shading units, 160 TMUs, 64 ROPs, and 40 ray tracing cores. The MI300X has no listed ray tracing cores or tensor cores, while the RX 6750 GRE includes dedicated ray tracing hardware. Memory architecture is equally divergent: the MI300X uses 192 GB of HBM3 on an 8192-bit bus with 5.32 TB/s bandwidth, while the RX 6750 GRE uses 12 GB of GDDR6 on a 192-bit bus with 432.0 GB/s bandwidth. Clock behavior also differs sharply. The MI300X runs at a 1000 MHz base and 2100 MHz boost, while the RX 6750 GRE runs at 2321 MHz base and 2581 MHz boost, with a 2439 MHz game clock. The MI300X compensates with sheer scale, not clock speed.
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark entries between these two products, and the win counts are zero for both sides. That absence is itself informative. The two devices were never tested against each other in a shared workload, which reflects their fundamentally different target markets. However, the available benchmark scores allow a comparative analysis through the nearest rival data and the percentile rankings.
The MI300X delivers 317,994 in Geekbench OpenCL, a score that is 100 percent of the database ceiling. Against its nearest rivals, it sits 5 percent behind the NVIDIA H200 NVL (334,891), 7.5 percent ahead of the NVIDIA L40S (295,763), 8 percent behind the NVIDIA B200 (345,482), and 10.7 percent ahead of the NVIDIA RTX 6000 Ada Generation (287,237). So while it does not hold the absolute top score in its own rival group, it is within single-digit percentage points of the fastest accelerators and clearly ahead of two of the four listed competitors.
The RX 6750 GRE, with an average benchmark score of 55,698, sits at the 87th percentile. Its nearest rivals are tightly clustered: the AMD Radeon 8060S averages 55,757, just 0.1 percent ahead; the NVIDIA GeForce RTX 5080 averages 56,083, 0.7 percent ahead; the AMD Radeon Pro W5700X averages 54,828, 1.6 percent behind; and the NVIDIA GeForce RTX 4080 averages 54,247, 2.7 percent behind. This clustering shows that the RX 6750 GRE is competitive within a very narrow band of performance, trading places with more recent or higher-tier parts by margins that are nearly negligible. The Vulkan score of 108,994 and the 3DMark Steel Nomad DX12 score of 2,402 are the specific results that define its graphics performance, and neither has a counterpart in the MI300X data.
Specification Differences
The specification sheet reveals two products that share only a manufacturer and a process foundry. The MI300X uses a 5 nm process, the RX 6750 GRE uses 7 nm. The MI300X has 153,000 million transistors on a 1017 mm² die; the RX 6750 GRE has 17,200 million on 335 mm². Transistor density is 150.4M per mm² versus 51.3M per mm². The MI300X has 19,456 shading units and 1,216 TMUs, with no ROPs and no display outputs; the RX 6750 GRE has 2,560 shading units, 160 TMUs, 64 ROPs, and 40 ray tracing cores.
Memory capacity is 192 GB of HBM3 versus 12 GB of GDDR6. Bus width is 8192 bit versus 192 bit. Bandwidth is 5.32 TB/s versus 432.0 GB/s. Clock speeds: the MI300X runs at 1000 MHz base and 2100 MHz boost, with memory at 1300 MHz (5.2 Gbps effective); the RX 6750 GRE runs at 2321 MHz base, 2581 MHz boost, and 2439 MHz game clock, with memory at 2250 MHz (18 Gbps effective). Pixel rate is 0 MPixel/s for the MI300X versus 165.2 GPixel/s for the RX 6750 GRE. Texture rate is 2,553.6 GTexel/s versus 413.0 GTexel/s. FP32 throughput is 81.72 TFLOPS versus 13.21 TFLOPS. FP16 throughput is 81.72 TFLOPS (1:1) for the MI300X versus 26.43 TFLOPS (2:1) for the RX 6750 GRE.
Power and physical specs differ just as widely. The MI300X has a TDP of 750 W, requires a suggested 1150 W PSU, uses an OAM module slot width, and has no power connectors. The RX 6750 GRE has a TDP of 250 W, requires a suggested 600 W PSU, uses a dual-slot design, and takes 1x 6-pin plus 1x 8-pin power connectors. The bus interface is PCIe 5.0 x16 for the MI300X versus PCIe 4.0 x16 for the RX 6750 GRE. The RX 6750 GRE has display outputs (1x HDMI 2.1 and 3x DisplayPort 1.4a) and API support (DirectX 12 Ultimate, OpenGL 4.6, Vulkan 1.4), while the MI300X has none of these. Release dates are also distinct: the MI300X launched on December 5, 2023, and the RX 6750 GRE on October 16, 2023. The RX 6750 GRE has a launch MSRP of 334 USD, and its production status is listed as active.
FAQ
Q: Which product has the higher raw compute throughput?
A: The MI300X delivers 81.72 TFLOPS in FP32 and 81.72 TFLOPS in FP16 (1:1), compared to 13.21 TFLOPS FP32 and 26.43 TFLOPS FP16 (2:1) for the RX 6750 GRE.
Q: Does the MI300X support graphics APIs?
A: No. The database lists DirectX, OpenGL, and Vulkan as N/A for the MI300X, and it has no display outputs. The RX 6750 GRE supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: How does the MI300X compare to its closest rivals in OpenCL performance?
A: The MI300X scores 317,994 in Geekbench OpenCL. It is 5 percent behind the NVIDIA H200 NVL (334,891), 8 percent behind the NVIDIA B200 (345,482), 7.5 percent ahead of the NVIDIA L40S (295,763), and 10.7 percent ahead of the NVIDIA RTX 6000 Ada Generation (287,237).
Q: Where does the RX 6750 GRE rank among all GPUs?
A: The RX 6750 GRE sits at the 87th percentile among all GPUs, with an average benchmark score of 55,698. Its nearest rival, the AMD Radeon 8060S, is just 0.1 percent ahead at 55,757.
Q: What is the memory configuration difference?
A: The MI300X has 192 GB of HBM3 on an 8192-bit bus with 5.32 TB/s bandwidth. The RX 6750 GRE has 12 GB of GDDR6 on a 192-bit bus with 432.0 GB/s bandwidth.
Q: Which product has a higher boost clock?
A: The RX 6750 GRE has a boost clock of 2581 MHz, while the MI300X boosts to 2100 MHz. The RX 6750 GRE also has a higher base clock at 2321 MHz versus 1000 MHz.
The Verdict
The data points to a simple selection criterion: choose the MI300X if the workload is compute acceleration without any graphics or display requirement, and choose the RX 6750 GRE if the workload involves rendering, ray tracing, or standard graphics APIs. The MI300X is the only one of the two with a 100th percentile OpenCL score, and it offers 192 GB of HBM3 memory with 5.32 TB/s bandwidth and 81.72 TFLOPS of FP32 throughput. The RX 6750 GRE, at the 87th percentile, delivers 64 ROPs, 40 ray tracing cores, and full DirectX 12 Ultimate support, along with a 2581 MHz boost clock and a 12 GB GDDR6 frame buffer.
The MI300X has no display outputs and no graphics API support, so it cannot function as a conventional GPU for gaming or desktop use. The RX 6750 GRE has no compute capability that approaches the MI300X, with less than one-sixth of the FP32 throughput and a memory subsystem that is smaller by an order of magnitude. The release dates are close, with the RX 6750 GRE arriving October 16, 2023, and the MI300X on December 5, 2023, but the architectural gulf between them is far wider than the calendar suggests. The MI300X targets the top of the accelerator market, as shown by its rival group of NVIDIA H200 NVL, B200, L40S, and RTX 6000 Ada Generation. The RX 6750 GRE competes in a dense mid-range cluster where the nearest rivals are within 2.7 percent of its average score. There is no overlap in intended use, and the benchmark records confirm that split.