AMD Instinct MI300A vs NVIDIA GeForce RTX 4060 Ti 16 GB Comparison

AMD
RADEON

AMD Instinct MI300A

CORE STATE Aqua Vanjaram
VRAM 128 GB
CLOCK SPEED 2100 MHz
TDP 750 W
BUS WIDTH 8192 bit
ARCHITECTURE CDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti 16 GB

CORE STATE AD106
VRAM 16 GB
CLOCK SPEED 2535 MHz
TDP 165 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
2,907

Analysis: AMD Instinct MI300A vs NVIDIA GeForce RTX 4060 Ti 16 GB

The AMD Instinct MI300A and the NVIDIA GeForce RTX 4060 Ti 16 GB occupy opposite ends of the hardware spectrum. The MI300A is a data-center compute accelerator built on CDNA 3.0, while the RTX 4060 Ti is a consumer graphics card for gaming and workstation use. Direct benchmark comparisons are absent from the database, but the recorded specifications and available scores provide a clear picture of their intended roles and relative performance.

Head-to-Head Benchmarks

The only benchmark score recorded in the database belongs to the RTX 4060 Ti 16 GB. In the 3DMark Steel Nomad DX12 test, it scores 2907. That places it at the 18th percentile among all GPUs, meaning it outperforms roughly 18% of the database’s tracked graphics cards. Its nearest rivals in the database are tightly clustered: the NVIDIA RTX PRO 4000 Blackwell SFF scores 2910 (0.1% higher), the RTX 4060 Ti 8 GB scores 2913 (0.2% higher), the RTX 4010 scores 2893 (0.5% lower), and the Quadro P600 scores 2923 (0.5% higher). The 16 GB model sits essentially within a 1% band of these peers, confirming that its rasterization performance is typical for its segment.

The MI300A has no recorded benchmark scores and no nearest rivals listed. Its percentile rank is 50, which indicates a median position in the database, but that figure is based on its aggregate specification profile rather than actual test results. With zero entries in its benchmarks array, the database contains no direct measurement of its performance in any application. Therefore, any head-to-head comparison must rely on architectural and specification differences rather than side-by-side test data.

The FP32 compute figures highlight the gap. The MI300A delivers 61.29 TFLOPS of single-precision throughput, while the RTX 4060 Ti delivers 22.06 TFLOPS. That is roughly 2.8 times higher raw compute for the MI300A. However, the RTX 4060 Ti also lists FP16 at 22.06 TFLOPS with a 1:1 ratio, meaning it does not gain a throughput advantage in half-precision work. The MI300A has no FP16 figure recorded, but its FP32 output alone exceeds the RTX 4060 Ti’s peak in either precision.

Texture and pixel rates diverge sharply. The MI300A reaches 1,915.2 GTexel/s, while the RTX 4060 Ti reaches 344.8 GTexel/s, a 5.6-fold difference. The MI300A has a pixel rate of 0 MPixel/s because it has no ROPs, whereas the RTX 4060 Ti has 48 ROPs and a pixel rate of 121.7 GPixel/s. For traditional rasterized graphics output, the RTX 4060 Ti is the only one with display capability.

Memory bandwidth is another decisive gap. The MI300A uses 128 GB of HBM3 across an 8192-bit bus, yielding 5.32 TB/s. The RTX 4060 Ti uses 16 GB of GDDR6 across a 128-bit bus, yielding 288.0 GB/s. That is an 18.5-fold bandwidth advantage for the MI300A, which directly supports its role in memory-heavy compute workloads.

The database shows zero wins for either item in head-to-head testing, as no such tests exist. The verdict must therefore derive from the recorded specs and the single RTX 4060 Ti score.

The Verdict

The data indicates that these two products are not competitors. The MI300A is built for high-throughput compute, with 14592 shading units, 912 TMUs, and 128 GB of HBM3. The RTX 4060 Ti is built for consumer graphics, with 4352 shading units, 136 TMUs, 48 ROPs, 34 RT cores, and 136 tensor cores. The MI300A has no display outputs, no DirectX, OpenGL, or Vulkan support, and no ROPs. It cannot render to a screen. The RTX 4060 Ti has full API support, including DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, plus HDMI and DisplayPort outputs.

For compute-heavy tasks such as large-scale matrix operations, AI training, or scientific simulation, the MI300A’s FP32 throughput, bandwidth, and memory capacity make it the clear choice. Its 750 W TDP and suggested 1150 W PSU reflect a system designed for sustained, high-power workloads. The RTX 4060 Ti, with a 165 W TDP and 450 W suggested PSU, is suited for desktop systems.

For gaming, ray tracing, or any display-oriented workload, the RTX 4060 Ti is the only viable option. Its 2907 Steel Nomad score demonstrates functional DX12 performance, and its RT cores and tensor cores provide features the MI300A lacks entirely. The MI300A cannot run these workloads at all.

The database’s percentile data reinforces this split. The RTX 4060 Ti sits at the 18th percentile, a mid-to-low position among all GPUs, but it has measurable performance. The MI300A sits at the 50th percentile despite having no benchmarks, indicating its specification profile is considered average by the database’s scoring method, likely because it lacks consumer-oriented features.

Where Each One Wins

The MI300A wins in raw compute throughput. Its FP32 output of 61.29 TFLOPS is nearly triple the RTX 4060 Ti’s 22.06 TFLOPS. Its texture rate of 1,915.2 GTexel/s is over five times higher. Its memory bandwidth of 5.32 TB/s dwarfs the 288.0 GB/s of the RTX 4060 Ti, and its 128 GB capacity is eight times larger. These figures point to workloads that involve massive datasets and parallel number crunching, such as large language model training, physics simulations, or data processing.

The RTX 4060 Ti wins in graphics output. It has 48 ROPs and a pixel rate of 121.7 GPixel/s, while the MI300A has none. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the MI300A lists N/A for all three. It has display outputs (1x HDMI 2.1, 3x DisplayPort 1.4a), while the MI300A has none. It also has RT cores and tensor cores, which the MI300A does not list, enabling ray tracing and AI-accelerated features in games and creative applications.

The RTX 4060 Ti also wins in physical integration. Its dual-slot design, 240 mm length, 111 mm height, and 40 mm width fit standard desktop cases. It uses a single 16-pin power connector and a 450 W suggested PSU. The MI300A is an OAM Module with no power connectors listed, meaning it requires a server-class chassis and power delivery system. The RTX 4060 Ti has a launch MSRP of 499 USD, while the MI300A has none recorded.

In terms of clock speeds, the RTX 4060 Ti runs higher: a 2310 MHz base and 2535 MHz boost versus the MI300A’s 1000 MHz base and 2100 MHz boost. But the MI300A compensates with far more execution units, so clock speed alone does not determine performance.

FAQ

Q: Which GPU has higher raw FP32 compute?

A: The AMD Instinct MI300A delivers 61.29 TFLOPS, while the NVIDIA GeForce RTX 4060 Ti 16 GB delivers 22.06 TFLOPS. The MI300A is roughly 2.8 times higher.

Q: Can the MI300A output video to a display?

A: No. The MI300A lists no display outputs and has a pixel rate of 0 MPixel/s with 0 ROPs. It also has no DirectX, OpenGL, or Vulkan support. The RTX 4060 Ti has 1x HDMI 2.1 and 3x DisplayPort 1.4a outputs.

Q: How do their memory configurations compare?

A: The MI300A has 128 GB of HBM3 on an 8192-bit bus with 5.32 TB/s bandwidth. The RTX 4060 Ti has 16 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth. The MI300A has more than 18 times the bandwidth and eight times the capacity.

Q: What is the RTX 4060 Ti’s benchmark score?

A: In 3DMark Steel Nomad DX12, it scores 2907. That is 0.1% lower than the RTX PRO 4000 Blackwell SFF (2910), 0.2% lower than the RTX 4060 Ti 8 GB (2913), 0.5% higher than the RTX 4010 (2893), and 0.5% lower than the Quadro P600 (2923).

Q: Does the MI300A have any benchmark scores in the database?

A: No. Its benchmarks array is empty, and it has no nearest rivals listed. Its percentile rank of 50 is based on specifications, not test results.

Q: Which card supports ray tracing?

A: The RTX 4060 Ti has 34 RT cores and 136 tensor cores. The MI300A has no RT cores or tensor cores listed. Only the RTX 4060 Ti can handle ray-traced workloads.

Architecture Differences

The MI300A uses the CDNA 3.0 architecture on the Aqua Vanjaram chip, manufactured on a 5 nm process at TSMC. It contains 153,000 million transistors on a 1017 mm² die, resulting in a transistor density of 150.4 million per mm². This is a compute-oriented design with 14592 shading units and 912 TMUs, but no ROPs. It uses HBM3 memory and has no display or API support. Its power target is 750 W with a suggested PSU of 1150 W.

The RTX 4060 Ti uses the Ada Lovelace architecture on the AD106 chip, also manufactured on a 5 nm process at TSMC. It contains 22,900 million transistors on a 188 mm² die, resulting in a transistor density of 121.8 million per mm². This is a graphics-oriented design with 4352 shading units, 136 TMUs, 48 ROPs, 34 RT cores, and 136 tensor cores. It uses GDDR6 memory and supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. Its power target is 165 W with a suggested PSU of 450 W.

The key architectural divide is purpose. The MI300A is an accelerator with no graphics pipeline, no rasterization units, and no API support. The RTX 4060 Ti is a complete GPU with a full graphics pipeline, ray tracing hardware, and API compatibility. The MI300A’s transistor count is roughly 6.7 times higher, and its die area is about 5.4 times larger, reflecting its focus on massive parallel compute.

The MI300A’s memory type (HBM3) and bus width (8192 bit) are server-class designs. The RTX 4060 Ti’s GDDR6 and 128-bit bus are typical for consumer cards. The MI300A has no power connectors because it is an OAM Module, designed to be plugged into a backplane. The RTX 4060 Ti uses a 16-pin connector and fits into a standard PCIe slot.

Specification Differences

The two products differ in nearly every measurable category. The MI300A has a base clock of 1000 MHz and boost clock of 2100 MHz; the RTX 4060 Ti has a base clock of 2310 MHz and boost clock of 2535 MHz. The MI300A has 128 GB memory; the RTX 4060 Ti has 16 GB. The MI300A uses HBM3; the RTX 4060 Ti uses GDDR6. The MI300A has an 8192-bit bus; the RTX 4060 Ti has a 128-bit bus. The MI300A has 5.32 TB/s bandwidth; the RTX 4060 Ti has 288.0 GB/s.

The MI300A has 14592 shading units versus 4352 for the RTX 4060 Ti. TMUs are 912 versus 136. ROPs are 0 versus 48. The RTX 4060 Ti has 34 RT cores and 136 tensor cores; the MI300A lists none. The MI300A’s texture rate is 1,915.2 GTexel/s versus 344.8 GTexel/s for the RTX 4060 Ti. Pixel rate is 0 MPixel/s versus 121.7 GPixel/s. FP32 is 61.29 TFLOPS versus 22.06 TFLOPS. The RTX 4060 Ti also has FP16 at 22.06 TFLOPS with a 1:1 ratio; the MI300A has no FP16 figure.

Power figures differ substantially: 750 W TDP for the MI300A versus 165 W for the RTX 4060 Ti. The suggested PSU is 1150 W versus 450 W. The MI300A is an OAM Module; the RTX 4060 Ti is dual-slot. The MI300A has no power connectors; the RTX 4060 Ti uses 1x 16-pin. The MI300A has no display outputs; the RTX 4060 Ti has 1x HDMI 2.1 and 3x DisplayPort 1.4a. The RTX 4060 Ti supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4; the MI300A lists N/A for all.

The bus interface differs: PCIe 5.0 x16 for the MI300A, PCIe 4.0 x8 for the RTX 4060 Ti. The RTX 4060 Ti has physical dimensions of 240 mm length, 111 mm height, and 40 mm width; the MI300A has none listed. The RTX 4060 Ti has a launch MSRP of 499 USD; the MI300A has none. Release dates differ: the MI300A launched on 2023-12-05, and the RTX 4060 Ti on 2023-05-17. The RTX 4060 Ti is marked end-of-life, while the MI300A has no production status. The RTX 4060 Ti’s predecessor is GeForce 30 and successor is GeForce 50; the MI300A’s predecessor is Radeon Instinct with no successor listed.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI300A
RTX 4060 Ti 16 GB
Core Specs
Shading Units
14,592
4,352 -70.2%
Shaders
14,592
4,352 -70.2%
TMUs
912
136 -85.1%
ROPs
0
48 +∞%
Compute Units
228
—
SM Count
—
34
Clocks
Base Clock
1000 MHz
2310 MHz
Boost Clock
2100 MHz
2535 MHz
Memory Clock
1300 MHz 5.2 Gbps effective
2250 MHz 18 Gbps effective
Memory
Memory Size
128 GB
16 GB
VRAM (MB)
131,072
16,384 -87.5%
Memory Type
HBM3
GDDR6
Memory Bus
8192 bit
128 bit
Bandwidth
5.32 TB/s
288.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
16 MB
32 MB
L3 Cache
256 MB
—
Performance
Pixel Rate
0 MPixel/s
121.7 GPixel/s
Texture Rate
1,915.2 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
61.29 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
30.64 TFLOPS (1:2)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
—
22.06 TFLOPS (1:1)
AI/RT
RT Cores
—
34
Tensor Cores
—
136
Matrix Cores
912
—
Power
TDP
750 W
165 W
TDP (W)
750
165 -78.0%
Suggested PSU
1150 W
450 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
CDNA 3.0
Ada Lovelace
GPU Name
Aqua Vanjaram
AD106
Generation
Instinct (MIx)
GeForce 40
Process Size
5 nm
5 nm
Transistors
153,000 million
22,900 million
Die Size
1017 mm²
188 mm²
Foundry
TSMC
TSMC
Density
150.4M / mm²
121.8M / mm²
AMD MCM
MCM
2
—
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
8.9
Shader Model
—
6.8
Physical
Slot Width
OAM Module
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x8
Other
Launch Price
—
499 USD
Production
—
End-of-life
Predecessor
Radeon Instinct
GeForce 30
Successor
—
GeForce 50
View Instinct MI300A Details View GeForce RTX 4060 Ti 16 GB Details