NVIDIA GeForce GTX 950A vs NVIDIA RTX PRO 6000D Blackwell Max-Q Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 950A

CORE STATE GM107
VRAM 2 GB
CLOCK SPEED 1124 MHz
TDP 75 W
BUS WIDTH 128 bit
ARCHITECTURE Maxwell
nm
PROCESS 28 nm
LAUNCH DATE 2015
VS
NVIDIA
GEFORCE

RTX PRO 6000D Blackwell Max-Q

CORE STATE GB202
VRAM 96 GB
CLOCK SPEED 2288 MHz
TDP 300 W
BUS WIDTH 512 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
10,273
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
11,088

Analysis: NVIDIA GeForce GTX 950A vs NVIDIA RTX PRO 6000D Blackwell Max-Q

# NVIDIA RTX PRO 6000D Blackwell Max-Q vs NVIDIA GeForce GTX 950A

The NVIDIA RTX PRO 6000D Blackwell Max-Q and NVIDIA GeForce GTX 950A occupy opposite ends of the GPU spectrum, separated by a decade of architecture evolution and a vast gulf in compute capability. The RTX PRO 6000D is a current-generation workstation powerhouse built on Blackwell 2.0, while the GTX 950A is an end-of-life mobile module from the Maxwell era. Benchmark data shows the RTX PRO 6000D scoring 11088 in 3DMark Steel Nomad DX12, while the GTX 950A posts 10273 in Geekbench OpenCL — a comparison that reveals far more than the raw score gap suggests, given the different test workloads and the generational chasm between them.

Head-to-Head Benchmarks

The two cards were not subjected to identical benchmark suites in the FACT PACK, so direct numerical comparison requires careful interpretation. The RTX PRO 6000D Blackwell Max-Q achieved a score of 11088 in 3dmark_3dmark_steel_nomad_dx12, a demanding DirectX 12 workload that stresses modern rendering features. This places it at the 50th percentile among all GPUs, with its nearest rival being the AMD Radeon RX 550 at 11075 — a delta of just 0.1%, meaning the RTX PRO 6000D is essentially tied with that entry-level card in this specific test. The NVIDIA GeForce GTX 1650 SUPER trails at 11047 (0.4% behind), while the AMD FirePro W4300 leads at 11225 (1.2% ahead of the RTX PRO 6000D).

The GTX 950A, by contrast, was benchmarked with geekbench_opencl, scoring 10273. That result lands at the 48th percentile among all GPUs, with the AMD Radeon RX 6500M ahead at 10362 (0.9% higher) and the AMD Radeon RX 550X leading at 10481 (2% higher). The GTX 950A outperforms the AMD Radeon R9 M375, which scores 10070, by 2%. The NVIDIA Tesla C2075 sits between them at 10400, 1.2% above the GTX 950A.

Interpreting these scores across different benchmark types is inherently limited, but the data does reveal that both cards cluster within a narrow performance band in their respective tests. The RTX PRO 6000D's 50th percentile ranking in Steel Nomad suggests mid-pack positioning among all GPUs, while the GTX 950A's 48th percentile in OpenCL indicates similar relative standing. The absolute scores are close — 11088 versus 10273 — but the workloads measure different capabilities, making a direct performance equivalence claim unsupported by the data.

Where Each One Wins

The RTX PRO 6000D Blackwell Max-Q is built for modern, graphics-intensive workloads that leverage DirectX 12 Ultimate features. Its 3DMark Steel Nomad score of 11088 reflects strong performance in a contemporary DX12 rendering test, and its hardware feature set — including 188 ray tracing cores and 752 tensor cores — positions it for ray-traced content creation and AI-accelerated tasks. With 96 GB of GDDR7 memory and 1.79 TB/s of bandwidth, this card is designed for massive datasets and high-resolution rendering pipelines.

The GTX 950A, meanwhile, posts its 10273 OpenCL score using a fundamentally different architecture. Its Maxwell design targets general-purpose compute through OpenCL, and the 2 GB DDR3 frame buffer with 32.03 GB/s bandwidth suits lighter, legacy workloads. The GTX 950A's 75 W TDP and MXM form factor make it suitable for portable devices, where power efficiency and compactness take priority over raw performance. Its 640 shading units and 16 ROPs deliver adequate throughput for older games and basic productivity tasks, but the absence of ray tracing and tensor cores means it cannot accelerate modern AI or RT workloads.

For users running DX12-based applications with ray tracing and AI features, the RTX PRO 6000D is the clear choice. For legacy OpenCL compute in a low-power mobile chassis, the GTX 950A holds its own within its niche. The data shows no head-to-head benchmark wins for either card, as they were never tested against each other directly, but the architectural and memory disparities make the RTX PRO 6000D the only option for contemporary high-end workloads.

Architecture Differences

The RTX PRO 6000D Blackwell Max-Q uses the GB202 chip built on a 5 nm process at TSMC, packing 92,200 million transistors into a 750 mm² die. This yields a transistor density of 122.9 million per square millimeter — a figure that reflects the advanced manufacturing node and the complexity of the Blackwell 2.0 architecture. The GTX 950A, in contrast, uses the GM107 chip on a 28 nm process, also from TSMC, with just 1,870 million transistors on a 148 mm² die. Its transistor density of 12.6 million per square millimeter is nearly an order of magnitude lower, illustrating the massive scaling achieved over the decade between their releases.

The RTX PRO 6000D features 24,064 shading units, 752 TMUs, and 192 ROPs, alongside 188 ray tracing cores and 752 tensor cores. This makes it a fully featured accelerator for graphics and compute alike. The GTX 950A offers 640 shading units, 40 TMUs, and 16 ROPs, with no dedicated ray tracing or tensor cores. The Blackwell architecture supports DirectX 12 Ultimate (12_2), while the Maxwell card only reaches DirectX 12 (11_0) — a meaningful difference for modern game and application compatibility.

Memory architecture diverges sharply as well. The RTX PRO 6000D uses 96 GB of GDDR7 across a 512-bit bus, achieving 1.79 TB/s bandwidth. The GTX 950A uses 2 GB of DDR3 on a 128-bit bus, yielding 32.03 GB/s. Pixel and texture rates tell the same story: the RTX PRO 6000D reaches 439.3 GPixel/s and 1,720.6 GTexel/s, versus 17.98 GPixel/s and 44.96 GTexel/s for the GTX 950A. FP32 compute is 110.1 TFLOPS on the Blackwell card, while the Maxwell card manages 1,438.7 GFLOPS — a difference of over 75 times.

Specification Differences

The two cards differ across nearly every measurable specification. The RTX PRO 6000D has a base clock of 1590 MHz and a boost clock of 2288 MHz, with memory running at 1750 MHz (28 Gbps effective). The GTX 950A operates at a 993 MHz base and 1124 MHz boost, with memory at 1001 MHz (2 Gbps effective). Power requirements diverge dramatically: the RTX PRO 6000D draws 300 W and requires a 700 W suggested PSU with a single 16-pin connector, while the GTX 950A consumes just 75 W and needs no external power connectors.

Form factors could not be more different. The RTX PRO 6000D is a dual-slot card measuring 267 mm in length, 111 mm in height, and 40 mm in width, with four DisplayPort 2.1b outputs. The GTX 950A is an MXM Module with no fixed dimensions listed, and its display outputs are described as "Portable Device Dependent." The bus interfaces reflect their eras: PCIe 5.0 x16 for the Blackwell card versus MXM-B (3.0) for the Maxwell card.

The RTX PRO 6000D is currently in active production with a release date of 2025-03-17, succeeding Workstation Ada. The GTX 950A is end-of-life, released on 2015-03-12, succeeding GeForce 800A. The RTX PRO 6000D has a launch MSRP of 8,565 USD, while the GTX 950A has no listed launch MSRP. API support is similar for OpenGL (4.6) and Vulkan (1.4), but they differ on DirectX as noted.

FAQ

Q: Which card has higher raw compute performance?

A: The RTX PRO 6000D Blackwell Max-Q delivers 110.1 TFLOPS of FP32 compute, while the GTX 950A provides 1,438.7 GFLOPS. The Blackwell card is over 75 times faster in raw FP32 throughput.

Q: Do both cards support ray tracing?

A: No. The RTX PRO 6000D includes 188 dedicated ray tracing cores, while the GTX 950A has no ray tracing cores at all. This makes the Blackwell card suitable for RT workloads, which the Maxwell card cannot accelerate.

Q: How do their memory configurations compare?

A: The RTX PRO 6000D has 96 GB of GDDR7 on a 512-bit bus with 1.79 TB/s bandwidth. The GTX 950A has 2 GB of DDR3 on a 128-bit bus with 32.03 GB/s bandwidth. The Blackwell card offers 48 times the memory capacity and roughly 56 times the bandwidth.

Q: What is the performance percentile ranking for each GPU?

A: The RTX PRO 6000D sits at the 50th percentile among all GPUs based on its 3DMark Steel Nomad score of 11088. The GTX 950A ranks at the 48th percentile based on its Geekbench OpenCL score of 10273.

Q: Are these cards from the same architecture generation?

A: No. The RTX PRO 6000D uses the Blackwell 2.0 architecture on a 5 nm process, released in 2025. The GTX 950A uses the Maxwell architecture on a 28 nm process, released in 2015. They are separated by roughly a decade of GPU design.

Q: What are the power requirements for each card?

A: The RTX PRO 6000D has a 300 W TDP and requires a 700 W suggested power supply with a 16-pin connector. The GTX 950A has a 75 W TDP and requires no external power connectors, drawing all power from its MXM slot.

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 950A
RTX PRO 6000D Blackwell Max-Q
Core Specs
Shading Units
640
24,064 +3660.0%
Shaders
640
24,064 +3660.0%
TMUs
40
752 +1780.0%
ROPs
16
192 +1100.0%
SM Count
—
188
Clocks
Base Clock
993 MHz
1590 MHz
Boost Clock
1124 MHz
2288 MHz
Memory Clock
1001 MHz 2 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
2 GB
96 GB
VRAM (MB)
2,048
98,304 +4700.0%
Memory Type
DDR3
GDDR7
Memory Bus
128 bit
512 bit
Bandwidth
32.03 GB/s
1.79 TB/s
Cache
L1 Cache
64 KB (per SMM)
128 KB (per SM)
L2 Cache
2 MB
128 MB
Performance
Pixel Rate
17.98 GPixel/s
439.3 GPixel/s
Texture Rate
44.96 GTexel/s
1,720.6 GTexel/s
FP32 (TFLOPS)
1,438.7 GFLOPS
110.1 TFLOPS
FP64 (TFLOPS)
44.96 GFLOPS (1:32)
1.721 TFLOPS (1:64)
FP16 (TFLOPS)
—
110.1 TFLOPS (1:1)
AI/RT
RT Cores
—
188
Tensor Cores
—
752
Power
TDP
75 W
300 W
TDP (W)
75
300 +300.0%
Suggested PSU
—
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Maxwell
Blackwell 2.0
GPU Name
GM107
GB202
Generation
GeForce 900A
Blackwell PRO W (x000)
Process Size
28 nm
5 nm
Transistors
1,870 million
92,200 million
Die Size
148 mm²
750 mm²
Foundry
TSMC
TSMC
Density
12.6M / mm²
122.9M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
5.0
12.0
Shader Model
6.7 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
4x DisplayPort 2.1b
Bus Interface
MXM-B (3.0)
PCIe 5.0 x16
Other
Launch Price
—
8,565 USD
Production
End-of-life
Active
Predecessor
GeForce 800A
Workstation Ada
View GeForce GTX 950A Details View RTX PRO 6000D Blackwell Max-Q Details