NVIDIA B200 SXM6 vs NVIDIA GeForce RTX 5060 Ti 16 GB Comparison

NVIDIA
GEFORCE

NVIDIA B200 SXM6

CORE STATE GB100
VRAM 180 GB
CLOCK SPEED 1830 MHz
TDP 1000 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell
nm
PROCESS 5 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 16 GB

CORE STATE GB206
VRAM 16 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
144
passmark_directx_11
N/A
219
passmark_directx_12
N/A
89
passmark_directx_9
N/A
238
passmark_g2d
N/A
1,206
passmark_g3d
N/A
22,618
passmark_gpu_compute
N/A
11,224

Analysis: NVIDIA B200 SXM6 vs NVIDIA GeForce RTX 5060 Ti 16 GB

Head-to-Head Benchmarks

The database contains no shared benchmark results between the NVIDIA B200 SXM6 and the NVIDIA GeForce RTX 5060 Ti 16 GB. The B200 SXM6 has no recorded benchmark scores in the database, while the RTX 5060 Ti 16 GB carries eight recorded entries. As a result, a direct numerical comparison of measured performance is not possible from the available data. What can be compared are the architectural specifications and the RTX 5060 Ti's recorded scores against its own nearest rivals.

The RTX 5060 Ti 16 GB posts an average benchmark score of 4970 across its recorded tests. Its percentile rank among all GPUs in the database is 29, meaning it sits below the median performer. The recorded scores show a wide spread across test types. In 3DMark Steel Nomad DX12, the card scores 4019. In Passmark tests, the results are 22618 for G3D, 11224 for GPU compute, 1206 for G2D, 238 for DirectX 9, 219 for DirectX 11, 144 for DirectX 10, and 89 for DirectX 12.

Against its nearest rivals, the RTX 5060 Ti 16 GB is nearly tied with the NVIDIA Quadro 4000. The Quadro 4000 has an average score of 4979, which is 0.2% higher than the RTX 5060 Ti's 4970. The AMD Radeon R7 Graphics posts an average score of 4998, 0.6% higher. The AMD Radeon R7 M360 scores 4931, which is 0.8% lower. The AMD Radeon R7 M265 also scores 4929, 0.8% lower. These deltas are all within a single percentage point, indicating that the RTX 5060 Ti 16 GB performs in a tightly clustered band around these older and lower-tier parts.

The B200 SXM6 has no benchmark entries, no average score, and no nearest rivals listed. Its percentile rank is 50, but this is not supported by any measured test data. The lack of head-to-head results means the database cannot confirm which part wins any specific workload test. The wins counter for both items is zero.

Where Each One Wins

Without shared benchmarks, the win analysis must rely on the structural differences in the recorded data. The RTX 5060 Ti 16 GB is the only part with measurable scores, so it wins all recorded benchmark categories by default. Its strongest recorded result is in Passmark G3D at 22618, followed by GPU compute at 11224. The weakest recorded result is Passmark DirectX 12 at 89, which is notably lower than its DirectX 11 score of 219 and DirectX 9 score of 238.

The B200 SXM6 cannot be assigned any benchmark wins from the database. Its role as a server accelerator with no display outputs and no API support for DirectX, OpenGL, or Vulkan means it is not designed for the same workloads as the RTX 5060 Ti. The RTX 5060 Ti supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, making it applicable to gaming and graphics workloads. The B200 SXM6 lists all APIs as N/A.

The use-case split is therefore defined by design intent rather than measured performance. The RTX 5060 Ti 16 GB is a dual-slot consumer card with display outputs (1x HDMI 2.1b and 3x DisplayPort 2.1b), a 180 W TDP, and a 450 W suggested PSU. The B200 SXM6 is an SXM module with a 1000 W TDP, a 1400 W suggested PSU, and no display outputs. The B200's memory configuration of 180 GB HBM3e on an 8192-bit bus with 8.19 TB/s bandwidth targets large-scale compute. The RTX 5060 Ti's 16 GB GDDR7 on a 128-bit bus with 448.0 GB/s targets conventional graphics.

Architecture Differences

The two GPUs share the NVIDIA manufacturer and the 5 nm process node from TSMC, but their architectures diverge. The B200 SXM6 uses the GB100 chip based on Blackwell architecture from the Server Blackwell (Bxx) generation. The RTX 5060 Ti 16 GB uses the GB206 chip based on Blackwell 2.0 architecture from the GeForce 50 generation.

The transistor counts differ dramatically. The B200 SXM6 contains 208,000 million transistors on a 1628 mm² die, giving a transistor density of 127.8 million per square millimeter. The RTX 5060 Ti 16 GB contains 21,900 million transistors on a 181 mm² die, with a density of 121.0 million per square millimeter. The B200's die is roughly nine times larger in area and carries nearly ten times the transistor count.

Core configurations follow the same pattern. The B200 SXM6 has 18,944 shading units, 592 texture mapping units, 24 raster output pipelines, and 592 tensor cores. The RTX 5060 Ti 16 GB has 4,608 shading units, 144 texture mapping units, 48 raster output pipelines, 36 ray tracing cores, and 144 tensor cores. The B200 has no listed ray tracing cores, while the RTX 5060 Ti includes them.

Memory architecture is also distinct. The B200 SXM6 uses HBM3e memory with 180 GB capacity, an 8192-bit bus, and 8.19 TB/s bandwidth. The RTX 5060 Ti 16 GB uses GDDR7 with 16 GB capacity, a 128-bit bus, and 448.0 GB/s bandwidth. The B200's memory bandwidth is over 18 times higher, though its capacity is just over 11 times higher.

Clock speeds show a different design philosophy. The B200 SXM6 has a base clock of 120 MHz and a boost clock of 1830 MHz, with memory at 2000 MHz (8 Gbps effective). The RTX 5060 Ti 16 GB has a base clock of 2407 MHz and a boost clock of 2572 MHz, with memory at 1750 MHz (28 Gbps effective). The consumer card runs at much higher base and boost frequencies, while the server part relies on massive parallelism and memory bandwidth.

Rasterization and texture rates reflect the core counts. The B200 SXM6 achieves 43.92 GPixel/s and 1,083.4 GTexel/s. The RTX 5060 Ti 16 GB achieves 123.5 GPixel/s and 370.4 GTexel/s. The consumer card has a higher pixel rate due to its higher clocks and double the ROP count, while the server card has nearly three times the texture rate on the strength of its 592 TMUs.

Compute throughput in FP32 and FP16 is listed at 69.34 TFLOPS for the B200 SXM6 in both formats with a 1:1 ratio. The RTX 5060 Ti 16 GB lists 23.70 TFLOPS in both FP32 and FP16, also at 1:1. The B200's compute figures are roughly three times the RTX 5060 Ti's, despite the much larger difference in shader count.

FAQ

Q: Which GPU has a higher boost clock?

A: The NVIDIA GeForce RTX 5060 Ti 16 GB has a boost clock of 2572 MHz, while the NVIDIA B200 SXM6 has a boost clock of 1830 MHz.

Q: How do the memory bandwidth figures compare?

A: The B200 SXM6 has 8.19 TB/s of bandwidth from HBM3e memory on an 8192-bit bus. The RTX 5060 Ti 16 GB has 448.0 GB/s from GDDR7 memory on a 128-bit bus.

Q: What is the average benchmark score for the RTX 5060 Ti 16 GB?

A: The RTX 5060 Ti 16 GB has an average benchmark score of 4970 across its eight recorded tests. The B200 SXM6 has no recorded benchmark scores.

Q: What are the nearest rivals to the RTX 5060 Ti 16 GB in the database?

A: The nearest rivals are the NVIDIA Quadro 4000 with an average score of 4979 and a delta of -0.2%, the AMD Radeon R7 Graphics with 4998 and a delta of -0.6%, the AMD Radeon R7 M360 with 4931 and a delta of 0.8%, and the AMD Radeon R7 M265 with 4929 and a delta of 0.8%.

Q: Do both GPUs use the same process node?

A: Yes, both use a 5 nm process from TSMC. The B200 SXM6 has a transistor density of 127.8 million per mm², while the RTX 5060 Ti 16 GB has 121.0 million per mm².

Q: What display outputs does each GPU have?

A: The B200 SXM6 has no display outputs. The RTX 5060 Ti 16 GB has 1x HDMI 2.1b and 3x DisplayPort 2.1b.

Specification Differences

| Specification | NVIDIA B200 SXM6 | NVIDIA GeForce RTX 5060 Ti 16 GB |

|----------------|------------------|----------------------------------|

| Generation | Server Blackwell (Bxx) | GeForce 50 |

| Architecture | Blackwell | Blackwell 2.0 |

| Chip | GB100 | GB206 |

| Transistors | 208,000 million | 21,900 million |

| Die Size | 1628 mm² | 181 mm² |

| Transistor Density | 127.8M / mm² | 121.0M / mm² |

| Base Clock | 120 MHz | 2407 MHz |

| Boost Clock | 1830 MHz | 2572 MHz |

| Memory Clock | 2000 MHz 8 Gbps effective | 1750 MHz 28 Gbps effective |

| Memory Size | 180 GB | 16 GB |

| Memory Type | HBM3e | GDDR7 |

| Memory Bus Width | 8192 bit | 128 bit |

| Memory Bandwidth | 8.19 TB/s | 448.0 GB/s |

| Shading Units | 18944 | 4608 |

| TMUs | 592 | 144 |

| ROPs | 24 | 48 |

| RT Cores | None listed | 36 |

| Tensor Cores | 592 | 144 |

| Pixel Rate | 43.92 GPixel/s | 123.5 GPixel/s |

| Texture Rate | 1,083.4 GTexel/s | 370.4 GTexel/s |

| FP32 | 69.34 TFLOPS | 23.70 TFLOPS |

| FP16 | 69.34 TFLOPS (1:1) | 23.70 TFLOPS (1:1) |

| TDP | 1000 W | 180 W |

| Slot Width | SXM Module | Dual-slot |

| Power Connectors | None listed | 1x 8-pin |

| Suggested PSU | 1400 W | 450 W |

| Bus Interface | PCIe 6.0 x16 | PCIe 5.0 x8 |

| Display Outputs | No outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1b |

| DirectX | N/A | 12 Ultimate (12_2) |

| OpenGL | N/A | 4.6 |

| Vulkan | N/A | 1.4 |

| Dimensions | Not listed | 241 mm x 111 mm x 40 mm |

| Release Date | 2024-10-31 | 2025-04-15 |

| Predecessor | Server Hopper | GeForce 40 |

| Successor | Server Rubin | GeForce 60 |

| Launch MSRP | 34,999 USD | 429 USD |

| Average Benchmark Score | 0 | 4970 |

| Percentile vs All GPUs | 50 | 29 |

DETAILED SPECIFICATIONS

SPECIFICATION
B200 SXM6
RTX 5060 Ti 16 GB
Core Specs
Shading Units
18,944
4,608 -75.7%
Shaders
18,944
4,608 -75.7%
TMUs
592
144 -75.7%
ROPs
24
48 +100.0%
SM Count
148
36 -75.7%
Clocks
Base Clock
120 MHz
2407 MHz
Boost Clock
1830 MHz
2572 MHz
Memory Clock
2000 MHz 8 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
180 GB
16 GB
VRAM (MB)
184,320
16,384 -91.1%
Memory Type
HBM3e
GDDR7
Memory Bus
8192 bit
128 bit
Bandwidth
8.19 TB/s
448.0 GB/s
Cache
L1 Cache
256 KB (per SM)
128 KB (per SM)
L2 Cache
126 MB
32 MB
Performance
Pixel Rate
43.92 GPixel/s
123.5 GPixel/s
Texture Rate
1,083.4 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
69.34 TFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
34.67 TFLOPS (1:2)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
69.34 TFLOPS (1:1)
23.70 TFLOPS (1:1)
AI/RT
RT Cores
—
36
Tensor Cores
592
144 -75.7%
Power
TDP
1000 W
180 W
TDP (W)
1,000
180 -82.0%
Suggested PSU
1400 W
450 W
Power Connectors
—
1x 8-pin
Architecture
Architecture
Blackwell
Blackwell 2.0
GPU Name
GB100
GB206
Generation
Server Blackwell (Bxx)
GeForce 50
Process Size
5 nm
5 nm
Transistors
208,000 million
21,900 million
Die Size
1628 mm²
181 mm²
Foundry
TSMC
TSMC
Density
127.8M / mm²
121.0M / mm²
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
10.0
12.0
Shader Model
—
6.9
Physical
Slot Width
SXM Module
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 6.0 x16
PCIe 5.0 x8
Other
Launch Price
34,999 USD
429 USD
Production
Active
Active
Predecessor
Server Hopper
GeForce 40
Successor
Server Rubin
GeForce 60
View B200 SXM6 Details View GeForce RTX 5060 Ti 16 GB Details