Intel UHD Graphics 710 Mobile vs Lisuan Tech LX PRO Comparison

Head-to-Head Benchmarks

The database contains no recorded benchmark scores for either the Intel UHD Graphics 710 Mobile or the Lisuan Tech LX PRO. Both entries have an average benchmark score of zero, and the head-to-head benchmark table is empty. This means there is no measured performance data to compare directly, no frame rate results, no synthetic test scores, and no aggregate performance percentile to differentiate them in practical workloads.

Both GPUs are listed at the 50th percentile against all GPUs in the database, which is a neutral placeholder rather than a measured ranking. Without actual benchmark submissions, the percentile field carries no comparative weight. The wins counter for each product is also zero, confirming that no direct comparison results have been recorded.

What the data does show is the theoretical throughput ceilings for each part. The Intel UHD Graphics 710 Mobile delivers a pixel rate of 4.800 GPixel/s, a texture rate of 9.600 GTexel/s, and FP32 compute of 307.2 GFLOPS. The Lisuan Tech LX PRO delivers 192.0 GPixel/s, 384.0 GTexel/s, and 24.58 TFLOPS FP32. These are hardware specifications, not measured outcomes, but they establish the raw capability envelope for each design.

The Lisuan Tech LX PRO has a 40x higher pixel rate, a 40x higher texture rate, and roughly 80x higher FP32 compute than the Intel part, based strictly on the specification fields. Those ratios come from dividing the recorded numbers, and they indicate the scale of hardware difference. The Intel UHD Graphics 710 Mobile is an integrated processor graphics solution, while the Lisuan Tech LX PRO is a discrete dual-slot card with its own 24 GB GDDR6 memory pool.

Architecture Differences

The two products sit on entirely different architectural foundations. The Intel UHD Graphics 710 Mobile uses the Raptor Lake chip with Generation 12.2 architecture, built on a 10 nm process at Intel's own foundry. Its generation field is labeled "HD Graphics-M (Raptor Lake)". The Lisuan Tech LX PRO uses the 7G105 chip with a "TrueGPU" architecture, built on a 6 nm process at TSMC, and belongs to the 7G100 generation.

The process node difference is direct: 10 nm for Intel versus 6 nm for Lisuan Tech. That is a substantial manufacturing gap, though the database does not record transistor counts, die sizes, or transistor density for either part. The Intel chip has no listed transistor count, die size, or density. The Lisuan chip lists transistors as "unknown" and die size as "unknown", so no further analysis is possible from the recorded data.

Core resources differ by a wide margin. The Intel UHD Graphics 710 Mobile has 128 shading units, 8 texture mapping units, and 4 render output units. The Lisuan Tech LX PRO has 6144 shading units, 192 TMUs, and 96 ROPs. That is 48x more shading units, 24x more TMUs, and 24x more ROPs. Neither part lists ray tracing cores or tensor cores, so those fields remain empty for both products.

Memory architecture is fundamentally different. The Intel part uses system shared memory for size, type, bus width, and bandwidth, with bandwidth listed as "System Dependent". The Lisuan Tech LX PRO has 24 GB of GDDR6 memory on a 192-bit bus, with a bandwidth of 432.0 GB/s and a memory clock of 2250 MHz, described as 18 Gbps effective. The Intel part has no dedicated memory clock field other than system shared, and its base clock is 300 MHz with a boost of 1200 MHz. The Lisuan part has no base or boost clock listed at all.

The bus interface also differs. Intel uses a Ring Bus, appropriate for an integrated graphics block. Lisuan Tech uses PCIe 4.0 x16, a standard discrete card interface. Display outputs are listed as "Portable Device Dependent" for the Intel part, while the Lisuan card provides 4x DisplayPort 1.4a outputs.

API support shows a generation gap. The Intel part supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The Lisuan Tech LX PRO supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.3. The DirectX feature level difference, 12_1 versus 12_2 Ultimate, is the notable software capability gap.

Power and physical configuration diverge sharply. The Intel UHD Graphics 710 Mobile has a TDP of 15 W and a slot width of "IGP", meaning it is integrated into the processor package. The Lisuan Tech LX PRO has a TDP of 225 W, a dual-slot footprint, a single 16-pin power connector, and a suggested PSU rating of 550 W. The Lisuan card measures 248 mm in length, 118 mm in height, and 48 mm in width.

The Verdict

The data clearly separates these two products into different use classes. The Intel UHD Graphics 710 Mobile is a low-power integrated graphics solution for portable devices, with a 15 W TDP and system-shared memory. The Lisuan Tech LX PRO is a high-power discrete graphics card with 24 GB of dedicated GDDR6 memory, a 225 W TDP, and a dual-slot cooler requirement.

For anyone building a desktop system with expansion space, the Lisuan Tech LX PRO is the only viable option for graphics-intensive workloads. Its 24.58 TFLOPS FP32 compute, 432.0 GB/s memory bandwidth, and 192.0 GPixel/s pixel rate place it in a completely different performance envelope than the Intel integrated part. The Intel UHD Graphics 710 Mobile cannot match any of those figures, and its system-shared memory means bandwidth is entirely dependent on the host system's memory configuration.

For ultraportable laptops and low-power embedded designs, the Intel UHD Graphics 710 Mobile is the only one that fits. Its 15 W TDP and IGP slot width mean it requires no separate power connector, no cooling solution beyond the laptop chassis, and no additional board space. The Lisuan Tech LX PRO cannot operate in that environment at all, given its 248 mm length, dual-slot height, and 16-pin power requirement.

The production status for both is "Active", and the release dates are recorded as 2023-01-03 for the Intel part and 2026-03-16 for the Lisuan part. The Intel part has a successor listed as Arc Graphics-M, while the Lisuan part has no successor. Neither product has a launch MSRP in the database.

Specification Differences

| Field | Intel UHD Graphics 710 Mobile | Lisuan Tech LX PRO |

|---|---|---|

| Chip | Raptor Lake | 7G105 |

| Architecture | Generation 12.2 | TrueGPU |

| Generation | HD Graphics-M (Raptor Lake) | 7G100 |

| Process Node | 10 nm | 6 nm |

| Foundry | Intel | TSMC |

| Base Clock | 300 MHz | None listed |

| Boost Clock | 1200 MHz | None listed |

| Memory Clock | System Shared | 2250 MHz, 18 Gbps effective |

| Memory Size | System Shared | 24 GB |

| Memory Type | System Shared | GDDR6 |

| Memory Bus Width | System Shared | 192 bit |

| Memory Bandwidth | System Dependent | 432.0 GB/s |

| Shading Units | 128 | 6144 |

| TMUs | 8 | 192 |

| ROPs | 4 | 96 |

| Pixel Rate | 4.800 GPixel/s | 192.0 GPixel/s |

| Texture Rate | 9.600 GTexel/s | 384.0 GTexel/s |

| FP32 | 307.2 GFLOPS | 24.58 TFLOPS |

| FP16 | 614.4 GFLOPS (2:1) | 49.15 TFLOPS (2:1) |

| TDP | 15 W | 225 W |

| Slot Width | IGP | Dual-slot |

| Power Connectors | None listed | 1x 16-pin |

| Suggested PSU | None listed | 550 W |

| Bus Interface | Ring Bus | PCIe 4.0 x16 |

| Display Outputs | Portable Device Dependent | 4x DisplayPort 1.4a |

| DirectX | 12 (12_1) | 12 Ultimate (12_2) |

| Vulkan | 1.4 | 1.3 |

| Length | None listed | 248 mm |

| Height | None listed | 118 mm |

| Width | None listed | 48 mm |

FAQ

Q: Which GPU has higher raw compute performance?

A: The Lisuan Tech LX PRO has 24.58 TFLOPS FP32, compared to 307.2 GFLOPS for the Intel UHD Graphics 710 Mobile. The Lisuan part is roughly 80x higher in FP32 throughput.

Q: How much memory does each GPU have?

A: The Intel UHD Graphics 710 Mobile uses system shared memory with no dedicated size. The Lisuan Tech LX PRO has 24 GB of GDDR6 memory on a 192-bit bus.

Q: What is the memory bandwidth difference?

A: The Lisuan Tech LX PRO has 432.0 GB/s of bandwidth. The Intel UHD Graphics 710 Mobile has bandwidth listed as "System Dependent", meaning it varies with the host system's memory configuration.

Q: Can the Intel UHD Graphics 710 Mobile be installed in a desktop PCIe slot?

A: No. Its slot width is listed as IGP, meaning it is integrated into the processor. It uses a Ring Bus interface, not PCIe.

Q: What power connector does the Lisuan Tech LX PRO require?

A: It requires a single 16-pin power connector, and the suggested PSU rating is 550 W. Its TDP is 225 W.

Q: Which GPU supports DirectX 12 Ultimate?

A: Only the Lisuan Tech LX PRO supports DirectX 12 Ultimate (12_2). The Intel UHD Graphics 710 Mobile supports DirectX 12 (12_1), which is a lower feature level.

Where Each One Wins

The Intel UHD Graphics 710 Mobile wins in power efficiency and physical integration. Its 15 W TDP is a fraction of the 225 W TDP of the Lisuan Tech LX PRO. It occupies no expansion slot, requires no power connector, and has no suggested PSU requirement. It is designed for portable devices where space and cooling are constrained, and its display outputs are dependent on the host device rather than fixed panel outputs.

The Lisuan Tech LX PRO wins in every raw throughput category recorded. Its pixel rate of 192.0 GPixel/s is 40x the Intel part's 4.800 GPixel/s. Its texture rate of 384.0 GTexel/s is 40x the Intel part's 9.600 GTexel/s. Its FP32 compute of 24.58 TFLOPS is roughly 80x the Intel part's 307.2 GFLOPS. Its FP16 of 49.15 TFLOPS dwarfs the Intel part's 614.4 GFLOPS.

The Lisuan Tech LX PRO also wins in memory capacity and bandwidth. It has 24 GB of dedicated GDDR6 with 432.0 GB/s bandwidth, while the Intel part relies on system shared memory with bandwidth dependent on the host. The Lisuan card provides four DisplayPort 1.4a outputs, giving it multi-monitor capability, while the Intel part's outputs are portable-device dependent.

For desktop workloads such as high-resolution rendering, large dataset processing, or multi-display output, the Lisuan Tech LX PRO is the clear choice from the data. Its PCIe 4.0 x16 interface and 192-bit memory bus provide the infrastructure for sustained high-throughput operation. For battery-powered portable systems where every watt counts, the Intel UHD Graphics 710 Mobile is the only feasible option, and its 10 nm process node and 15 W TDP reflect that design intent.

The API support split favors the Lisuan card for modern graphics features, since DirectX 12 Ultimate (12_2) includes capabilities not present in DirectX 12 (12_1). However, the Intel part supports Vulkan 1.4 while the Lisuan part supports Vulkan 1.3, so the Intel integrated solution has a newer Vulkan runtime version. Both support OpenGL 4.6, so legacy OpenGL workloads see no difference in API level.

The production status for both parts is Active, and the release dates show the Intel part launched earlier, with the Lisuan Tech LX PRO arriving later. The Intel part has a documented successor in Arc Graphics-M, suggesting an active product roadmap, while the Lisuan part has no successor listed. Neither product has a launch MSRP in the database, so no cost analysis is possible from the recorded data.