NVIDIA GeForce RTX 5070 Ti SUPER vs Lisuan Tech LX PRO Comparison

Head-to-Head Benchmarks

The recorded database contains a single benchmark result for the NVIDIA GeForce RTX 5070 Ti SUPER, while the Lisuan Tech LX PRO has no benchmark entries. The NVIDIA card scores 6269.5 points in the 3DMark Steel Nomad DX12 test. Its average benchmark score sits at 6270. This places the RTX 5070 Ti SUPER in the 36th percentile among all GPUs tracked in the database.

The Lisuan Tech LX PRO shows an average benchmark score of 0, reflecting the absence of recorded test data. Its percentile ranking of 50 is derived from its position in the database, but with no actual scores to analyze, direct numerical comparison is impossible.

The nearest rivals for the RTX 5070 Ti SUPER provide context for its performance level. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 matches it exactly with an average score of 6270 and a delta of 0%. The AMD FirePro W600 trails slightly at 6223, which represents a 0.8% deficit. Two other cards score marginally higher: the NVIDIA Quadro K620 at 6282 (0.2% above) and the AMD Radeon R7 M350 at 6327 (0.9% above). These deltas are all within a single percentage point, indicating that the RTX 5070 Ti SUPER sits in a tightly clustered performance band.

Without benchmark data for the LX PRO, the head-to-head comparison rests entirely on architectural and specification differences rather than measured performance. The data shows no wins recorded for either card in the head-to-head benchmark section.

FAQ

Q: How does the benchmark score of the RTX 5070 Ti SUPER compare to its nearest rivals?

A: The RTX 5070 Ti SUPER averages 6270 points. It matches the RTX 4070 Ti SUPER AD102 exactly with a 0% delta. It sits 0.8% above the AMD FirePro W600, 0.2% below the NVIDIA Quadro K620, and 0.9% below the AMD Radeon R7 M350.

Q: What benchmark data exists for the Lisuan Tech LX PRO?

A: The database contains no benchmark entries for the LX PRO. Its average benchmark score is recorded as 0, and it has no nearest rivals listed.

Q: Which card has more memory and bandwidth?

A: The LX PRO carries 24 GB of GDDR6 memory on a 192-bit bus, delivering 432.0 GB/s of bandwidth. The RTX 5070 Ti SUPER has 16 GB of GDDR7 memory on a 256-bit bus, delivering 896.0 GB/s of bandwidth, which is more than double the LX PRO's bandwidth.

Q: What are the FP32 and FP16 compute figures for each card?

A: The RTX 5070 Ti SUPER delivers 43.94 TFLOPS for FP32 and 43.94 TFLOPS for FP16 at a 1:1 ratio. The LX PRO delivers 24.58 TFLOPS for FP32 and 49.15 TFLOPS for FP16 at a 2:1 ratio, meaning its FP16 throughput exceeds its FP32 throughput.

Q: Which card has a higher pixel fill rate?

A: The RTX 5070 Ti SUPER achieves 235.4 GPixel/s, while the LX PRO achieves 192.0 GPixel/s. The NVIDIA card leads by a margin of 43.4 GPixel/s.

Q: What are the power requirements for each card?

A: The RTX 5070 Ti SUPER has a TDP of 350 W and requires a single 16-pin connector. The LX PRO has a TDP of 225 W, also uses a single 16-pin connector, and includes a suggested PSU rating of 550 W.

Architecture Differences

The two cards use fundamentally different architectures. The NVIDIA GeForce RTX 5070 Ti SUPER is built on the Blackwell 2.0 architecture with the GB203 chip, manufactured on a 5 nm process at TSMC. It belongs to the GeForce 50-series generation. The Lisuan Tech LX PRO uses the TrueGPU architecture with the 7G105 chip, fabricated on a 6 nm process, also at TSMC, and belongs to the 7G100 generation.

The transistor counts differ substantially. The RTX 5070 Ti SUPER packs 45,600 million transistors on a die size of 378 mm², yielding a transistor density of 120.6 million per mm². The LX PRO's transistor count and die size are listed as unknown, with no density figure recorded.

Ray tracing and tensor core configurations set the cards apart. The RTX 5070 Ti SUPER includes 70 RT cores and 280 tensor cores. The LX PRO lists no RT cores and no tensor cores, indicating either their absence or a lack of recorded data for those units.

The API support shows a partial overlap. Both cards support DirectX 12 Ultimate (12_2) and OpenGL 4.6. The RTX 5070 Ti SUPER supports Vulkan 1.4, while the LX PRO supports Vulkan 1.3.

The bus interfaces differ by one generation. The RTX 5070 Ti SUPER uses PCIe 5.0 x16, while the LX PRO uses PCIe 4.0 x16.

Display output configurations also differ. The RTX 5070 Ti SUPER provides one HDMI 2.1b port and three DisplayPort 2.1b ports. The LX PRO provides four DisplayPort 1.4a ports and no HDMI output.

Specification Differences

The memory subsystems diverge in several respects. The RTX 5070 Ti SUPER uses 16 GB of GDDR7 memory with a 256-bit bus and a bandwidth of 896.0 GB/s. The LX PRO uses 24 GB of GDDR6 memory with a 192-bit bus and a bandwidth of 432.0 GB/s. The memory clock differs as well: the NVIDIA card runs at 1750 MHz with 28 Gbps effective, while the LX PRO runs at 2250 MHz with 18 Gbps effective.

The compute unit counts favor the RTX 5070 Ti SUPER. It has 8960 shading units, 280 TMUs, and 96 ROPs. The LX PRO has 6144 shading units, 192 TMUs, and 96 ROPs. The ROP count is identical at 96.

The clock speeds show a notable difference. The RTX 5070 Ti SUPER has a base clock of 2295 MHz and a boost clock of 2452 MHz. The LX PRO lists no base or boost clock values in the database.

The throughput figures illustrate the performance gap. The RTX 5070 Ti SUPER delivers 686.6 GTexel/s of texture rate and 235.4 GPixel/s of pixel rate. The LX PRO delivers 384.0 GTexel/s of texture rate and 192.0 GPixel/s of pixel rate.

The FP32 compute capacity is nearly double on the NVIDIA card at 43.94 TFLOPS versus 24.58 TFLOPS. The FP16 figures are closer: 43.94 TFLOPS at 1:1 ratio for the RTX 5070 Ti SUPER, and 49.15 TFLOPS at 2:1 ratio for the LX PRO.

Power consumption differs by 125 W. The RTX 5070 Ti SUPER has a TDP of 350 W, while the LX PRO has a TDP of 225 W. Both use a dual-slot cooler design and a single 16-pin power connector. The LX PRO additionally lists a suggested PSU of 550 W, while the RTX 5070 Ti SUPER has no suggested PSU value recorded.

Physical dimensions differ as well. The RTX 5070 Ti SUPER measures 304 mm in length, 137 mm in height, and 48 mm in width. The LX PRO is shorter and lower at 248 mm in length and 118 mm in height, with the same 48 mm width.

The release dates are separated by several months. The RTX 5070 Ti SUPER has a release date in late 2025, while the LX PRO has a release date in early 2026. Both cards are listed as Active in production status. The RTX 5070 Ti SUPER has a launch MSRP of 749 USD; no launch MSRP is recorded for the LX PRO.

Where Each One Wins

The RTX 5070 Ti SUPER wins on raw compute throughput. Its FP32 performance of 43.94 TFLOPS is roughly 79% higher than the LX PRO's 24.58 TFLOPS. Its texture rate of 686.6 GTexel/s is about 79% higher than the LX PRO's 384.0 GTexel/s. Its pixel rate of 235.4 GPixel/s exceeds the LX PRO's 192.0 GPixel/s by about 23%. For workloads that depend on FP32 shader performance, texture filtering, or rasterization throughput, the data clearly favors the NVIDIA card.

The RTX 5070 Ti SUPER also wins on memory bandwidth. Its 896.0 GB/s is more than double the LX PRO's 432.0 GB/s. This advantage matters for high-resolution textures, large datasets, and memory-intensive operations. The GDDR7 memory type on the NVIDIA card operates at 28 Gbps effective, compared to 18 Gbps effective on the LX PRO's GDDR6.

The NVIDIA card additionally offers RT cores and tensor cores, which the LX PRO lacks. The 70 RT cores and 280 tensor cores on the RTX 5070 Ti SUPER provide dedicated hardware for ray tracing and AI-accelerated workloads. The LX PRO has no such units recorded. The newer PCIe 5.0 x16 interface on the NVIDIA card also provides twice the bandwidth of the LX PRO's PCIe 4.0 x16 interface for data transfers.

The LX PRO wins on memory capacity. Its 24 GB of GDDR6 memory exceeds the RTX 5070 Ti SUPER's 16 GB by 50%. For applications that require large framebuffers or working sets that exceed 16 GB, the LX PRO's larger pool provides headroom. The FP16 compute of the LX PRO also surpasses the NVIDIA card: 49.15 TFLOPS versus 43.94 TFLOPS. The LX PRO's 2:1 FP16 ratio allows it to double its FP32 throughput when operating in FP16 mode, which can benefit certain machine learning inference tasks or compute workloads that use reduced precision.

The LX PRO draws 125 W less power. Its 225 W TDP is 36% lower than the RTX 5070 Ti SUPER's 350 W TDP. It also has a shorter physical length at 248 mm versus 304 mm, making it more suitable for compact chassis. The LX PRO includes a suggested PSU rating of 550 W, while no such rating is recorded for the NVIDIA card.

The recorded benchmark data shows no direct performance comparison between the two cards. The RTX 5070 Ti SUPER's single 3DMark Steel Nomad score of 6269.5 places it near several comparable GPUs within a 1% band. The LX PRO's lack of benchmark results means its real-world performance cannot be assessed from the database. The specification analysis indicates that the RTX 5070 Ti SUPER dominates in compute throughput, bandwidth, and feature set, while the LX PRO offers advantages in memory capacity, FP16 throughput, power efficiency, and physical size.