Intel UHD Graphics 710 Mobile vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison

Intel UHD Graphics 710 Mobile and NVIDIA GeForce RTX 4060 Ti AD104 occupy opposite ends of the graphics spectrum. The Intel part is an integrated graphics solution built into Raptor Lake processors, while the NVIDIA card is a discrete, dual-slot add-in board from the GeForce 40-series. The benchmark database records no direct head-to-head measurements for this pair, and neither part has an average benchmark score or a percentile rank beyond the neutral 50th percentile placeholder. The recorded data instead provides a detailed specification comparison that illustrates the scale of the performance gap.

Head-to-Head Benchmarks

The database contains no head-to-head benchmark results for these two products. There are no wins recorded for either side, and no rival score comparisons are available. This absence is itself informative: the two devices are not positioned as competitors, and no test scenario has been logged that pits them directly against each other. The lack of measured data means any performance assessment must be derived from the architectural and specification differences recorded in the database.

The most direct comparison comes from theoretical throughput figures. The RTX 4060 Ti AD104 delivers 22.06 TFLOPS of FP32 compute, while the UHD Graphics 710 Mobile manages 307.2 GFLOPS. This represents a difference of roughly 71.8 times in raw floating-point throughput. The RTX card also processes FP16 at the same rate, 22.06 TFLOPS with a 1:1 ratio, whereas the Intel part reaches 614.4 GFLOPS with a 2:1 ratio, meaning its half-precision rate is only double its single-precision rate.

Pixel and texture throughput follow the same pattern. The NVIDIA card renders 121.7 GPixel/s, compared to 4.800 GPixel/s for the Intel integrated solution. Texture fill rates stand at 344.8 GTexel/s versus 9.600 GTexel/s. These figures indicate that the RTX 4060 Ti AD104 can sustain far higher resolution and detail settings in any rendering workload.

Memory bandwidth is another major separator. The RTX 4060 Ti AD104 uses 8 GB of GDDR6 memory on a 128-bit bus, delivering 288.0 GB/s of bandwidth. The Intel UHD Graphics 710 Mobile uses system shared memory with a bus width and memory type both listed as system shared, and its bandwidth is described as system dependent. No fixed number exists for the Intel part because it depends entirely on the host system's memory configuration. In practice, the NVIDIA card's dedicated 288.0 GB/s is a hard figure that the integrated solution cannot match, regardless of the system memory installed.

The shading resources also differ by an order of magnitude. The RTX 4060 Ti AD104 has 4352 shading units, 136 texture mapping units, and 48 raster output units. The Intel part has 128 shading units, 8 TMUs, and 4 ROPs. The NVIDIA card includes 34 ray tracing cores and 136 tensor cores; the Intel integrated graphics has no dedicated ray tracing or tensor hardware listed in the database.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The NVIDIA GeForce RTX 4060 Ti AD104 records 22.06 TFLOPS of FP32 performance, while the Intel UHD Graphics 710 Mobile records 307.2 GFLOPS. The NVIDIA part is roughly 71.8 times faster in this metric.

Q: How much memory bandwidth does each GPU provide?

A: The RTX 4060 Ti AD104 has 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s of bandwidth. The Intel UHD Graphics 710 Mobile uses system shared memory, and its bandwidth is listed as system dependent, so no fixed figure is recorded.

Q: Does the Intel UHD Graphics 710 Mobile support ray tracing?

A: No. The database lists no ray tracing cores for the Intel part. The RTX 4060 Ti AD104 includes 34 ray tracing cores, which enable hardware-accelerated ray tracing.

Q: What process nodes do these two GPUs use?

A: The Intel UHD Graphics 710 Mobile is built on a 10 nm process at Intel, while the NVIDIA GeForce RTX 4060 Ti AD104 uses a 5 nm process at TSMC. The NVIDIA chip, AD104, contains 35,800 million transistors on a 294 mm² die, with a transistor density of 121.8 million per mm².

Q: What are the power requirements for each GPU?

A: The Intel UHD Graphics 710 Mobile has a TDP of 15 W and is an integrated graphics processor (IGP). The RTX 4060 Ti AD104 has a TDP of 160 W, uses a single 16-pin power connector, and has a suggested power supply rating of 450 W.

Q: What is the release status of each product?

A: The Intel UHD Graphics 710 Mobile was released on January 3, 2023, and is listed as active in production. The NVIDIA GeForce RTX 4060 Ti AD104 was released on March 31, 2024, and is marked as end-of-life. Its predecessor is the GeForce 30 series and its successor is the GeForce 50 series. The Intel part's successor is Arc Graphics-M.

Architecture Differences

The two GPUs come from different architectural lineages. The Intel UHD Graphics 710 Mobile uses Generation 12.2 architecture, built on a Raptor Lake chip at Intel's 10 nm process node. The NVIDIA GeForce RTX 4060 Ti AD104 uses Ada Lovelace architecture, built on the AD104 chip at TSMC's 5 nm process node. The manufacturing foundry differs as well: Intel fabricates its own chip, while TSMC produces the NVIDIA chip.

The NVIDIA chip is a substantial piece of silicon, with 35,800 million transistors on a 294 mm² die. That works out to 121.8 million transistors per square millimeter. The Intel chip's transistor count and die size are not recorded in the database. The process node difference, 10 nm versus 5 nm, explains why NVIDIA can pack so many transistors into a relatively compact die.

The feature sets diverge sharply. The RTX 4060 Ti AD104 includes 34 dedicated ray tracing cores and 136 tensor cores, which are used for AI-accelerated workloads such as DLSS. The Intel UHD Graphics 710 Mobile has no ray tracing cores and no tensor cores listed. This means the NVIDIA card supports hardware ray tracing and tensor-based features, while the Intel part relies entirely on its conventional shader pipeline.

The DirectX support also differs. The Intel part supports DirectX 12 (12_1), while the NVIDIA card supports DirectX 12 Ultimate (12_2). Both support OpenGL 4.6 and Vulkan 1.4. The NVIDIA card's DirectX 12 Ultimate feature level includes additional capabilities such as mesh shaders and variable rate shading, which are part of the 12_2 feature set.

The memory architecture is fundamentally different. The Intel UHD Graphics 710 Mobile uses system shared memory for both capacity and bandwidth, meaning it borrows from the host CPU's memory pool. The RTX 4060 Ti AD104 has its own dedicated 8 GB of GDDR6 memory on a 128-bit bus. This dedicated memory provides a fixed 288.0 GB/s of bandwidth, independent of system memory performance. The Intel part's bandwidth is listed as system dependent, so it varies with the platform's memory speed and configuration.

Specification Differences

The database records several key specification differences between the two products. Clock speeds are one area: the Intel UHD Graphics 710 Mobile has a base clock of 300 MHz and a boost clock of 1200 MHz, while the RTX 4060 Ti AD104 has a base clock of 2310 MHz and a boost clock of 2535 MHz. The NVIDIA memory clock is 2250 MHz with 18 Gbps effective data rate, whereas the Intel part's memory clock is listed as system shared.

Memory capacity and type differ completely. The Intel part has system shared memory with a system shared type and bus width. The NVIDIA card has 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth. The bus interface also differs: the Intel part uses a Ring Bus, while the NVIDIA card uses PCIe 4.0 x8.

The physical specifications are not comparable. The Intel UHD Graphics 710 Mobile is an IGP with no slot width, power connectors, or dimensions recorded. It has a TDP of 15 W. The RTX 4060 Ti AD104 is a dual-slot card measuring 240 mm in length, 111 mm in height, and 40 mm in width. It has a TDP of 160 W, requires a single 16-pin power connector, and has a suggested power supply of 450 W. The display outputs also differ: the Intel part is portable device dependent, while the NVIDIA card provides 1x HDMI 2.1 and 3x DisplayPort 1.4a.

The production status differs as well. The Intel UHD Graphics 710 Mobile is active and has no launch MSRP recorded. The RTX 4060 Ti AD104 is end-of-life and had a launch MSRP of 399 USD. The release dates are also different: January 3, 2023 for the Intel part and March 31, 2024 for the NVIDIA card.

The Verdict

The data in the database points to a clear separation of roles. The Intel UHD Graphics 710 Mobile is an integrated solution designed for basic display output and light graphical workloads. Its 15 W TDP, system shared memory, and lack of dedicated ray tracing or tensor hardware indicate its purpose is power-efficient, everyday computing rather than high-performance graphics. The 128 shading units and 4 ROPs are sufficient for standard desktop tasks but not for demanding 3D applications.

The NVIDIA GeForce RTX 4060 Ti AD104 is a discrete graphics card built for performance. Its 4352 shading units, 136 TMUs, 48 ROPs, 34 ray tracing cores, and 136 tensor cores position it as a capable gaming and content creation GPU. The 8 GB of GDDR6 memory with 288.0 GB/s bandwidth provides the data throughput needed for modern game textures and high-resolution assets. The 22.06 TFLOPS of FP32 compute is a professional-level figure, and the 121.7 GPixel/s pixel rate supports high refresh rate rendering.

The benchmark database records no direct tests between these two products, which is consistent with their different market positions. The RTX 4060 Ti AD104 is end-of-life and belongs to the GeForce 40-series, with its successor already listed as the GeForce 50 series. The Intel part remains active and is a component of Raptor Lake processors, not a standalone retail product.

Based on the recorded specifications, the RTX 4060 Ti AD104 is approximately 71.8 times faster in FP32 compute, 25.4 times faster in pixel throughput, and 35.9 times faster in texture fill rate when compared to the Intel UHD Graphics 710 Mobile. These ratios come directly from the recorded figures: 22.06 TFLOPS versus 307.2 GFLOPS, 121.7 GPixel/s versus 4.800 GPixel/s, and 344.8 GTexel/s versus 9.600 GTexel/s.

The choice between these two is dictated by the intended use case. Systems with the Intel UHD Graphics 710 Mobile are designed for low power consumption and basic functionality, with the graphics performance being secondary to CPU operation. The RTX 4060 Ti AD104 is for users who require high frame rates, ray tracing support, and tensor core acceleration. The database does not provide any evidence that the Intel part can handle the workloads that the NVIDIA card is designed for, nor does it suggest the NVIDIA card is appropriate for the ultra-low-power integrated role that the Intel part fills. Each product serves its respective segment, and the specification data confirms they are not interchangeable.