Intel Arc Pro B390 vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

Intel
GPU

Intel Arc Pro B390

CORE STATE Panther Lake
VRAM System Shared
CLOCK SPEED 2500 MHz
TDP 80 W
BUS WIDTH System Shared
ARCHITECTURE Xe3-LPG
nm
PROCESS 3 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
142
passmark_directx_11
N/A
220
passmark_directx_12
N/A
82
passmark_directx_9
N/A
228
passmark_g2d
N/A
1,169
passmark_g3d
N/A
21,981
passmark_gpu_compute
N/A
11,365

Analysis: Intel Arc Pro B390 vs NVIDIA GeForce RTX 5060 Ti 8 GB

Head-to-Head Benchmarks

The recorded data shows a decisive performance gap between these two GPUs, with the NVIDIA GeForce RTX 5060 Ti 8 GB holding every measurable advantage. The Intel Arc Pro B390 has no benchmark entries in the database, resulting in zero wins for either side in direct comparison. The RTX 5060 Ti delivers an average benchmark score of 4901, while the Arc Pro B390 has an average score of 0, indicating no recorded performance data.

The RTX 5060 Ti's strongest results come from the PassMark G3D test, where it scores 21981, and the PassMark GPU Compute test at 11365. Its 3DMark Steel Nomad DX12 score reaches 4019. The Arc Pro B390 lacks any corresponding scores, so quantitative head-to-head comparisons cannot be established. The database places the RTX 5060 Ti at the 29th percentile among all GPUs, while the Arc Pro B390 sits at the 50th percentile, though this percentile is based on no recorded benchmarks.

The nearest rivals for the RTX 5060 Ti illustrate its positioning. The AMD FirePro W5130M averages 4904, a delta of -0.1% relative to the RTX 5060 Ti. The NVIDIA GeForce GTS 450 averages 4893, a delta of 0.2%. Both AMD Radeon R7 M265 and R7 M360 average 4929 and 4931 respectively, with deltas of -0.6%. These near-identical scores indicate the RTX 5060 Ti's benchmark average is clustered with much older, lower-tier mobile GPUs, which is a notable anomaly given its architecture and specifications.

Architecture Differences

The two GPUs come from fundamentally different design philosophies. The Intel Arc Pro B390 uses the Panther Lake chip with Xe3-LPG architecture, manufactured on a 3 nm process at Intel's own foundry. It belongs to the Arc Graphics-WM generation and is classified as an integrated graphics processor (IGP) with no dedicated slot width, using system-shared memory. The NVIDIA GeForce RTX 5060 Ti 8 GB uses the GB206 chip with Blackwell 2.0 architecture, built on a 5 nm process at TSMC, and is a discrete dual-slot card with its own 8 GB of GDDR7 memory.

The RTX 5060 Ti contains 21,900 million transistors on a 181 mm² die, yielding a transistor density of 121.0M per mm². The Arc Pro B390's transistor count and die size are recorded as unknown. The Intel part has 1536 shading units, 48 texture mapping units, and 24 raster output pipelines. The NVIDIA part has 4608 shading units, 144 TMUs, and 48 ROPs, which are 3x, 3x, and 2x the Intel counts respectively. Ray tracing cores number 12 on the Intel GPU versus 36 on the NVIDIA GPU. The RTX 5060 Ti also includes 144 tensor cores, while the Arc Pro B390 has no tensor core entry.

Clock behavior differs substantially. The Arc Pro B390 runs at a 300 MHz base clock and 2500 MHz boost. The RTX 5060 Ti starts at 2407 MHz base and boosts to 2572 MHz. Memory configurations are entirely different: the Intel GPU uses system-shared memory with system-dependent bandwidth, while the NVIDIA card has 8 GB of GDDR7 on a 128-bit bus delivering 448.0 GB/s. The memory clock on the RTX 5060 Ti is 1750 MHz at 28 Gbps effective.

FAQ

Q: Does the Intel Arc Pro B390 have any recorded benchmark scores?

A: No. The database lists zero benchmark entries for the Arc Pro B390, with an average benchmark score of 0 and no nearest rivals. The RTX 5060 Ti has eight recorded scores across 3DMark and PassMark tests.

Q: Which GPU has a higher pixel fill rate?

A: The RTX 5060 Ti delivers 123.5 GPixel/s, while the Arc Pro B390 achieves 60.00 GPixel/s. The NVIDIA card is more than twice as fast in this metric.

Q: How do the FP32 compute figures compare?

A: The RTX 5060 Ti produces 23.70 TFLOPS of FP32 performance. The Arc Pro B390 produces 7.680 TFLOPS. The NVIDIA GPU is roughly three times faster in raw FP32 throughput.

Q: What is the power draw difference?

A: The Arc Pro B390 has an 80 W TDP and requires no power connectors, as it is an integrated GPU. The RTX 5060 Ti has a 180 W TDP, uses a single 8-pin power connector, and lists a suggested PSU of 450 W.

Q: Which GPU supports more recent PCIe connectivity?

A: The RTX 5060 Ti uses a PCIe 5.0 x8 bus interface. The Arc Pro B390 uses an IGP bus interface, which means it connects through the processor's integrated pathways rather than a discrete PCIe slot.

Q: Are the API feature sets identical?

A: Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The API support is the same, but the underlying hardware capabilities differ significantly in shader count and ray tracing resources.

Specification Differences

The two GPUs differ across nearly every specification field. The process node is 3 nm for Intel versus 5 nm for NVIDIA. The foundry is Intel for the Arc Pro B390 and TSMC for the RTX 5060 Ti. Transistors are unknown for Intel versus 21,900 million for NVIDIA. Die size is unknown for Intel versus 181 mm² for NVIDIA. Transistor density is null for Intel versus 121.0M per mm² for NVIDIA.

Clock speeds differ: base clock is 300 MHz versus 2407 MHz, boost is 2500 MHz versus 2572 MHz. Memory size is system shared versus 8 GB. Memory type is system shared versus GDDR7. Bus width is system shared versus 128 bit. Bandwidth is system dependent versus 448.0 GB/s.

Shading units are 1536 versus 4608. TMUs are 48 versus 144. ROPs are 24 versus 48. RT cores are 12 versus 36. Tensor cores are null versus 144. Pixel rate is 60.00 GPixel/s versus 123.5 GPixel/s. Texture rate is 120.0 GTexel/s versus 370.4 GTexel/s. FP32 is 7.680 TFLOPS versus 23.70 TFLOPS. FP16 is 15.36 TFLOPS (2:1) versus 23.70 TFLOPS (1:1).

TDP is 80 W versus 180 W. Slot width is IGP versus dual-slot. Power connectors are none versus one 8-pin. Suggested PSU is null versus 450 W. Bus interface is IGP versus PCIe 5.0 x8. Display outputs are portable device dependent versus 1x HDMI 2.1b and 3x DisplayPort 2.1b. Dimensions are null for Intel; the NVIDIA card measures 241 mm in length, 111 mm in height, and 40 mm in width.

Release dates differ: the Arc Pro B390 launched on 2026-01-26, while the RTX 5060 Ti launched on 2025-04-15. The Intel GPU has no launch MSRP recorded; the RTX 5060 Ti has a launch MSRP of 379 USD.

The Verdict

The data points to the RTX 5060 Ti as the only viable option for anyone seeking measured performance. It has concrete benchmark scores, a discrete form factor, dedicated GDDR7 memory, and a full set of specifications. The Arc Pro B390 is an integrated GPU with system-shared memory, no recorded benchmarks, and substantially lower theoretical throughput across every computed metric.

The RTX 5060 Ti delivers 3.1x the FP32 performance, 3x the shading units, 3x the TMUs, 2x the ROPs, 3x the RT cores, and 2.06x the pixel rate relative to the Arc Pro B390. Its memory bandwidth of 448.0 GB/s versus system-dependent bandwidth further separates the two. The Intel GPU's 80 W TDP and lack of power connectors make it suitable only for low-power integrated scenarios, whereas the RTX 5060 Ti's 180 W TDP and 450 W suggested PSU indicate a performance-oriented discrete card.

The RTX 5060 Ti's nearest rival data shows it performs in line with much older GPUs like the GeForce GTS 450 and Radeon R7 M265, which is surprising given its modern architecture. This may reflect the benchmark sample available, but it does not change the fundamental comparison: the Arc Pro B390 has no data, and the RTX 5060 Ti has a full benchmark profile.

Where Each One Wins

The RTX 5060 Ti wins in every specification category where both have recorded values. It is faster in shading, texturing, rasterization, ray tracing, and compute. It has a dedicated memory subsystem with 448.0 GB/s of bandwidth, a 128-bit bus, and GDDR7 memory. It supports PCIe 5.0 x8 connectivity, which is critical for systems that require high-bandwidth data transfer between the GPU and CPU. Its 23.70 TFLOPS FP32 and 23.70 TFLOPS FP16 (1:1) performance make it suitable for compute workloads that rely on consistent FP16 throughput.

The Arc Pro B390 wins only in power efficiency per the recorded TDP: 80 W versus 180 W. It also has a smaller physical footprint since it is an integrated GPU with no slot width, no power connectors, and no dimensions listed. For systems where a discrete GPU cannot be installed, such as ultra-compact portable devices, the Arc Pro B390 is the only option between the two. Its 2500 MHz boost clock is close to the RTX 5060 Ti's 2572 MHz, but the underlying architecture limits its real-world throughput.

The FP16 ratio difference is notable. The Arc Pro B390 delivers 15.36 TFLOPS FP16 at a 2:1 ratio relative to FP32, meaning it half-rate FP16. The RTX 5060 Ti delivers 23.70 TFLOPS FP16 at a 1:1 ratio, meaning full-rate FP16. For workloads that heavily use FP16, the NVIDIA card provides 1.54x the raw throughput. For workloads that mix FP32 and FP16, the RTX 5060 Ti's consistent 1:1 ratio avoids the Intel GPU's halved throughput penalty.

The RTX 5060 Ti also wins on display outputs, offering 1x HDMI 2.1b and 3x DisplayPort 2.1b, whereas the Arc Pro B390's display outputs are dependent on the portable device it is integrated into. The NVIDIA card's physical dimensions (241 mm length, 111 mm height, 40 mm width) confirm it is a standard dual-slot card, while the Intel GPU's integrated nature means it occupies no expansion slot. The RTX 5060 Ti's launch MSRP of 379 USD, stated once here, positions it as a mid-range discrete option, but the Arc Pro B390 has no price data recorded.

DETAILED SPECIFICATIONS

SPECIFICATION
Pro B390
RTX 5060 Ti 8 GB
Core Specs
Shading Units
1,536
4,608 +200.0%
Shaders
1,536
4,608 +200.0%
TMUs
48
144 +200.0%
ROPs
24
48 +100.0%
SM Count
—
36
Execution Units
12
—
Clocks
Base Clock
300 MHz
2407 MHz
Boost Clock
2500 MHz
2572 MHz
Memory Clock
System Shared
1750 MHz 28 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR7
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
448.0 GB/s
Cache
L1 Cache
64 KB (per EU)
128 KB (per SM)
L2 Cache
16 MB
32 MB
Performance
Pixel Rate
60.00 GPixel/s
123.5 GPixel/s
Texture Rate
120.0 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
7.680 TFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
960.0 GFLOPS (1:8)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
15.36 TFLOPS (2:1)
23.70 TFLOPS (1:1)
AI/RT
RT Cores
12
36 +200.0%
Tensor Cores
—
144
XMX Cores
96
—
Power
TDP
80 W
180 W
TDP (W)
80
180 +125.0%
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
Xe3-LPG
Blackwell 2.0
GPU Name
Panther Lake
GB206
Generation
Arc Graphics-WM (Panther Lake)
GeForce 50
Process Size
3 nm
5 nm
Transistors
unknown
21,900 million
Die Size
unknown
181 mm²
Foundry
Intel
TSMC
Density
—
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
IGP
PCIe 5.0 x8
Other
Launch Price
—
379 USD
Production
Active
Active
Predecessor
HD Graphics-WM
GeForce 40
Successor
—
GeForce 60
View Arc Pro B390 Details View GeForce RTX 5060 Ti 8 GB Details