Intel Arc Pro B390 vs NVIDIA GeForce RTX 5070 Mobile 12 GB Comparison

Intel
GPU

Intel Arc Pro B390

CORE STATE Panther Lake
VRAM System Shared
CLOCK SPEED 2500 MHz
TDP 80 W
BUS WIDTH System Shared
ARCHITECTURE Xe3-LPG
nm
PROCESS 3 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5070 Mobile 12 GB

CORE STATE GB206
VRAM 12 GB
CLOCK SPEED 1425 MHz
TDP 50 W
BUS WIDTH 192 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

Analysis: Intel Arc Pro B390 vs NVIDIA GeForce RTX 5070 Mobile 12 GB

Head-to-Head Benchmarks

The recorded database contains no direct head-to-head benchmark entries for the Intel Arc Pro B390 and the NVIDIA GeForce RTX 5070 Mobile 12 GB. Both parts hold a percentile rank of 50 against all GPUs, and their average benchmark scores are both zero, indicating that no standardized performance measurements have been logged for either product. Without actual test results, a direct numerical comparison of performance is not possible from the available data. The absence of benchmark scores means that any statement about relative speed, frame rates, or compute throughput must rely entirely on the architectural and specification differences listed in the database rather than measured outcomes.

The Intel Arc Pro B390 delivers a peak FP32 rate of 7.680 TFLOPS, while the NVIDIA GeForce RTX 5070 Mobile 12 GB reaches 13.13 TFLOPS in the same precision. The RTX 5070 Mobile holds a 71% advantage in raw floating-point throughput based on these peak figures. In FP16 compute, the Intel part achieves 15.36 TFLOPS through a 2:1 rate, whereas the NVIDIA part sustains 13.13 TFLOPS at a 1:1 ratio. The Intel GPU therefore offers 17% higher half-precision throughput, which reflects its architectural choice to accelerate FP16 operations. Pixel throughput favors the NVIDIA part at 68.40 GPixel/s against 60.00 GPixel/s for Intel, a 14% edge. Texture throughput shows a larger gap: NVIDIA delivers 205.2 GTexel/s compared to 120.0 GTexel/s for Intel, a 71% advantage.

Clock behavior differs sharply between the two. The Intel Arc Pro B390 has a base clock of 300 MHz and a boost clock of 2500 MHz, while the NVIDIA GeForce RTX 5070 Mobile runs at a 907 MHz base and 1425 MHz boost. The Intel part has a much wider frequency range and a significantly higher top clock, but the NVIDIA chip achieves its throughput through a larger number of execution units rather than higher clocks. The Intel boost clock exceeds NVIDIA's by 1075 MHz, yet NVIDIA's shading unit count is three times greater, which explains the FP32 advantage despite lower clocks.

Memory configuration is entirely different. The Intel Arc Pro B390 uses system-shared memory with a system-dependent bandwidth, meaning no fixed capacity, bus width, or bandwidth figure exists in the database. The NVIDIA GeForce RTX 5070 Mobile has 12 GB of GDDR7 memory on a 192-bit bus, delivering 576.0 GB/s of bandwidth. This fixed memory allocation gives the NVIDIA part a defined advantage in bandwidth-bound workloads, while the Intel part's performance depends on the host system's memory subsystem.

Where Each One Wins

Based on the specification data, the Intel Arc Pro B390 wins in FP16 compute throughput, posting 15.36 TFLOPS versus 13.13 TFLOPS for NVIDIA. This 17% advantage suggests the Intel architecture is optimized for workloads that leverage half-precision arithmetic, such as certain AI inference tasks or graphics effects that use FP16 intermediate calculations. The Intel part also has a higher boost clock at 2500 MHz, which could benefit lightly threaded or latency-sensitive tasks that scale with frequency rather than parallel width.

The NVIDIA GeForce RTX 5070 Mobile wins in FP32 compute, pixel rate, texture rate, and memory bandwidth. Its 13.13 TFLOPS FP32 output is 71% higher than Intel's 7.680 TFLOPS, indicating a substantial lead in general-purpose single-precision compute. The 68.40 GPixel/s pixel rate and 205.2 GTexel/s texture rate both exceed Intel's corresponding figures, which points to stronger rasterization throughput for conventional 3D rendering. The 576.0 GB/s memory bandwidth, fixed at 12 GB GDDR7, provides a dedicated high-speed pool that the Intel part lacks entirely, as it relies on system-shared memory with no guaranteed bandwidth.

The NVIDIA part also has more execution resources: 4608 shading units against 1536, 144 texture mapping units versus 48, 48 raster output units versus 24, 36 ray tracing cores versus 12, and 144 tensor cores where the Intel part lists none. These resource counts indicate NVIDIA holds a clear advantage in parallel throughput across all fixed-function and compute units. The Intel part has no tensor cores listed, so any tensor-accelerated workloads would fall entirely to NVIDIA's 144 tensor cores.

Architecture Differences

The Intel Arc Pro B390 uses the Panther Lake chip with the Xe3-LPG architecture, built on a 3 nm process at Intel's foundry. The NVIDIA GeForce RTX 5070 Mobile uses the GB206 chip with the Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. The process node difference gives Intel a manufacturing advantage in transistor density potential, although the database lists transistor count and die size as unknown for the Intel part. NVIDIA's chip contains 21,900 million transistors on a 181 mm² die, yielding a density of 121.0M per mm².

The Intel part belongs to the Arc Graphics-WM (Panther Lake) generation and lists its predecessor as HD Graphics-WM. The NVIDIA part is in the GeForce 50 Mobile generation, succeeding the GeForce 40 Mobile series. Both are integrated graphics processors, each with an IGP slot width and no power connectors. The Intel part has a TDP of 80 W, while the NVIDIA part has a TDP of 50 W. The bus interface differs: Intel uses IGP, while NVIDIA uses PCIe 5.0 x16. Display outputs are listed as portable device dependent for both, meaning the database records no fixed output configuration.

The NVIDIA part includes 144 tensor cores, a feature entirely absent from the Intel specification sheet. Both parts support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so the API feature sets are identical at the version level. The Intel part has an FP16 rate of 15.36 TFLOPS at a 2:1 ratio, while NVIDIA runs FP16 at 13.13 TFLOPS with a 1:1 ratio, indicating Intel dedicates more throughput to half-precision operations.

Release dates differ: the Intel Arc Pro B390 launched on January 26, 2026, and the NVIDIA GeForce RTX 5070 Mobile launched on May 31, 2026. Both are marked as active in production status. The Intel part has no successor listed, and neither part lists a successor. The NVIDIA part has a defined memory subsystem with 12 GB GDDR7, a 192-bit bus, and 576.0 GB/s bandwidth, while the Intel part's memory is entirely system-dependent with no fixed figures.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The NVIDIA GeForce RTX 5070 Mobile 12 GB delivers 13.13 TFLOPS FP32, which is 71% higher than the Intel Arc Pro B390's 7.680 TFLOPS.

Q: Does the Intel Arc Pro B390 have any compute advantage over NVIDIA?

A: Yes, in FP16 throughput the Intel part reaches 15.36 TFLOPS at a 2:1 rate, exceeding NVIDIA's 13.13 TFLOPS at a 1:1 rate by 17%.

Q: How much memory bandwidth does each GPU have?

A: The NVIDIA GeForce RTX 5070 Mobile has 576.0 GB/s from 12 GB of GDDR7 on a 192-bit bus. The Intel Arc Pro B390 uses system-shared memory with bandwidth listed as system dependent, so no fixed figure exists.

Q: What are the ray tracing capabilities of each part?

A: The NVIDIA part has 36 ray tracing cores, while the Intel part has 12. Both support DirectX 12 Ultimate (12_2), which includes ray tracing features, but the NVIDIA part has three times the RT core count.

Q: Which GPU has more shading units?

A: The NVIDIA GeForce RTX 5070 Mobile has 4608 shading units, exactly three times the 1536 shading units in the Intel Arc Pro B390.

Q: What is the power draw difference between the two?

A: The Intel Arc Pro B390 has a TDP of 80 W, while the NVIDIA GeForce RTX 5070 Mobile has a TDP of 50 W. The Intel part draws 30 W more according to the recorded figures.

The Verdict

The data in the database points to the NVIDIA GeForce RTX 5070 Mobile 12 GB as the stronger performer across most measured specifications. Its FP32 compute is 71% higher, its pixel rate is 14% higher, its texture rate is 71% higher, and it has three times the shading units, three times the TMUs, double the ROPs, three times the RT cores, and 144 tensor cores versus none for Intel. The fixed 12 GB GDDR7 memory with 576.0 GB/s bandwidth provides a concrete memory advantage, while the Intel part's shared memory configuration leaves bandwidth dependent on the host system.

The Intel Arc Pro B390 holds a single clear specification win: FP16 throughput at 15.36 TFLOPS, which is 17% above NVIDIA's 13.13 TFLOPS. It also operates at a higher boost clock of 2500 MHz versus 1425 MHz, and it uses a smaller 3 nm process against NVIDIA's 5 nm. However, these advantages do not offset NVIDIA's substantial lead in execution resources and memory bandwidth. The Intel part carries a higher TDP at 80 W against 50 W for NVIDIA, which suggests lower efficiency for the compute delivered.

For users prioritizing single-precision compute, rasterization throughput, memory bandwidth, or tensor-accelerated workloads, the NVIDIA GeForce RTX 5070 Mobile is the clear choice from the recorded data. For workloads that rely heavily on half-precision arithmetic and benefit from a higher boost clock, the Intel Arc Pro B390 offers a specific advantage, but its lack of dedicated memory and tensor cores limits its scope. The RTX 5070 Mobile launches later, on May 31, 2026, versus January 26, 2026 for the Intel part, and succeeds the GeForce 40 Mobile series, while the Intel part follows the HD Graphics-WM. Both are active products, but the NVIDIA part's specification sheet shows a broader and deeper capability set across nearly every measured category.

Specification Differences

| Field | Intel Arc Pro B390 | NVIDIA GeForce RTX 5070 Mobile 12 GB |

|---|---|---|

| Chip | Panther Lake | GB206 |

| Architecture | Xe3-LPG | Blackwell 2.0 |

| Generation | Arc Graphics-WM (Panther Lake) | GeForce 50 Mobile |

| Process Node | 3 nm | 5 nm |

| Foundry | Intel | TSMC |

| Transistors | unknown | 21,900 million |

| Die Size | unknown | 181 mm² |

| Transistor Density | null | 121.0M / mm² |

| Base Clock | 300 MHz | 907 MHz |

| Boost Clock | 2500 MHz | 1425 MHz |

| Memory Size | System Shared | 12 GB |

| Memory Type | System Shared | GDDR7 |

| Memory Bus Width | System Shared | 192 bit |

| Memory Bandwidth | System Dependent | 576.0 GB/s |

| Shading Units | 1536 | 4608 |

| TMUs | 48 | 144 |

| ROPs | 24 | 48 |

| RT Cores | 12 | 36 |

| Tensor Cores | null | 144 |

| Pixel Rate | 60.00 GPixel/s | 68.40 GPixel/s |

| Texture Rate | 120.0 GTexel/s | 205.2 GTexel/s |

| FP32 | 7.680 TFLOPS | 13.13 TFLOPS |

| FP16 | 15.36 TFLOPS (2:1) | 13.13 TFLOPS (1:1) |

| TDP | 80 W | 50 W |

| Bus Interface | IGP | PCIe 5.0 x16 |

| Release Date | 2026-01-26 | 2026-05-31 |

| Predecessor | HD Graphics-WM | GeForce 40 Mobile |

DETAILED SPECIFICATIONS

SPECIFICATION
Pro B390
RTX 5070 Mobile 12 GB
Core Specs
Shading Units
1,536
4,608 +200.0%
Shaders
1,536
4,608 +200.0%
TMUs
48
144 +200.0%
ROPs
24
48 +100.0%
SM Count
—
36
Execution Units
12
—
Clocks
Base Clock
300 MHz
907 MHz
Boost Clock
2500 MHz
1425 MHz
Memory Clock
System Shared
1500 MHz 24 Gbps effective
Memory
Memory Size
System Shared
12 GB
VRAM (MB)
—
12,288
Memory Type
System Shared
GDDR7
Memory Bus
System Shared
192 bit
Bandwidth
System Dependent
576.0 GB/s
Cache
L1 Cache
64 KB (per EU)
128 KB (per SM)
L2 Cache
16 MB
32 MB
Performance
Pixel Rate
60.00 GPixel/s
68.40 GPixel/s
Texture Rate
120.0 GTexel/s
205.2 GTexel/s
FP32 (TFLOPS)
7.680 TFLOPS
13.13 TFLOPS
FP64 (TFLOPS)
960.0 GFLOPS (1:8)
205.2 GFLOPS (1:64)
FP16 (TFLOPS)
15.36 TFLOPS (2:1)
13.13 TFLOPS (1:1)
AI/RT
RT Cores
12
36 +200.0%
Tensor Cores
—
144
XMX Cores
96
—
Power
TDP
80 W
50 W
TDP (W)
80
50 -37.5%
Power Connectors
None
None
Architecture
Architecture
Xe3-LPG
Blackwell 2.0
GPU Name
Panther Lake
GB206
Generation
Arc Graphics-WM (Panther Lake)
GeForce 50 Mobile
Process Size
3 nm
5 nm
Transistors
unknown
21,900 million
Die Size
unknown
181 mm²
Foundry
Intel
TSMC
Density
—
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
IGP
IGP
Outputs
Portable Device Dependent
Portable Device Dependent
Bus Interface
IGP
PCIe 5.0 x16
Other
Production
Active
Active
Predecessor
HD Graphics-WM
GeForce 40 Mobile
View Arc Pro B390 Details View GeForce RTX 5070 Mobile 12 GB Details