Intel Arc G3 Extreme vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison
Intel Arc G3 Extreme
GeForce RTX 5060 Ti 8 GB
PERFORMANCE BENCHMARKS
Analysis: Intel Arc G3 Extreme vs NVIDIA GeForce RTX 5060 Ti 8 GB
Where Each One Wins
The recorded data presents a clear division of roles between these two graphics processors. The Intel Arc G3 Extreme is an integrated graphics processor, or IGP, designed for portable devices where space and power are constrained. Its primary function is to provide a capable graphics solution within a system that uses shared memory, making it suitable for everyday visual tasks and light gaming. The NVIDIA GeForce RTX 5060 Ti 8 GB, in contrast, is a dedicated, dual-slot add-in board built for high-performance desktop gaming and content creation.
The benchmark database shows a significant performance gap. The NVIDIA card holds a 29th percentile rank among all GPUs, while the Intel part sits at the 50th percentile. This percentile data is crucial: a lower percentile rank indicates the NVIDIA card outperforms a larger percentage of other GPUs in the database. The average benchmark score for the NVIDIA card is 4901, while the Intel Arc G3 Extreme has an average benchmark score of 0, indicating no benchmark results are recorded for it in the database.
The NVIDIA GeForce RTX 5060 Ti 8 GB is the clear winner in raw compute and rendering capability. Its dedicated 8 GB of GDDR7 memory and 448.0 GB/s bandwidth provide a massive advantage over the Intel part's system-shared memory, whose bandwidth is listed as system dependent. This allows the NVIDIA card to handle high-resolution textures and complex 3D scenes that would be impossible for an IGP. The wins for the Intel part are not in performance but in integration and power efficiency, with a TDP of just 80 W compared to the NVIDIA card's 180 W.
Architecture Differences
The fundamental architectural split between the two is stark. Intel's Arc G3 Extreme is built on the Xe3-LPG architecture and uses the Panther Lake chip. It is fabricated on a 3 nm process at Intel's own foundry. NVIDIA's RTX 5060 Ti 8 GB uses the Blackwell 2.0 architecture and the GB206 chip, which is manufactured on a 5 nm process by TSMC.
The compute resources differ by a wide margin. The Intel IGP has 1536 shading units, 48 texture mapping units (TMUs), and 24 raster operation units (ROPs). It also includes 12 ray tracing cores. NVIDIA's dedicated card is far more substantial, featuring 4608 shading units, 144 TMUs, and 48 ROPs. It also has 36 ray tracing cores and 144 tensor cores, which are absent from the Intel part's specifications. The NVIDIA card's transistor count is listed as 21,900 million on a 181 mm² die, giving it a transistor density of 121.0M per mm². The Intel part's transistor count and die size are unknown.
Clock speeds show a different design philosophy. The Intel IGP has a base clock of 300 MHz and a boost clock of 2500 MHz. The NVIDIA card starts at a much higher base clock of 2407 MHz and boosts to 2572 MHz. The NVIDIA card also has dedicated memory clocks of 1750 MHz, or 28 Gbps effective, whereas the Intel part's memory clock is listed as system shared.
The memory architecture is the most defining difference. Intel's part uses system shared memory, meaning it relies on the host system's RAM. NVIDIA's card has its own dedicated 8 GB of GDDR7 memory on a 128-bit bus, providing 448.0 GB/s of bandwidth. This dedicated memory is a primary reason for the NVIDIA card's superior performance in memory-intensive workloads.
FAQ
Q: Which processor has a higher boost clock speed?
A: The NVIDIA GeForce RTX 5060 Ti 8 GB has a higher boost clock of 2572 MHz, compared to the Intel Arc G3 Extreme's boost clock of 2500 MHz.
Q: What is the difference in their manufacturing process nodes?
A: The Intel Arc G3 Extreme is fabricated on a 3 nm process, while the NVIDIA GeForce RTX 5060 Ti 8 GB is fabricated on a 5 nm process.
Q: How do their memory configurations compare?
A: The Intel Arc G3 Extreme uses system shared memory with system-dependent bandwidth. The NVIDIA GeForce RTX 5060 Ti 8 GB has 8 GB of dedicated GDDR7 memory on a 128-bit bus with 448.0 GB/s of bandwidth.
Q: Do both processors support the same DirectX version?
A: Yes, both the Intel Arc G3 Extreme and the NVIDIA GeForce RTX 5060 Ti 8 GB support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: What is the physical form factor of each?
A: The Intel Arc G3 Extreme is an integrated graphics processor (IGP) with no separate slot width or power connectors. The NVIDIA GeForce RTX 5060 Ti 8 GB is a dual-slot card that is 241 mm long, 111 mm high, and 40 mm wide, requiring a single 8-pin power connector.
Q: What is the NVIDIA card's launch MSRP?
A: The NVIDIA GeForce RTX 5060 Ti 8 GB had a launch MSRP of 379 USD.
Specification Differences
The specifications that differ between the two processors are numerous and define their distinct market positions.
- Manufacturer and Architecture: Intel uses the Xe3-LPG architecture, while NVIDIA uses Blackwell 2.0.
- Process Node and Foundry: Intel uses a 3 nm process at its own foundry, whereas NVIDIA uses a 5 nm process at TSMC.
- Transistors and Die Size: NVIDIA's chip has 21,900 million transistors on a 181 mm² die. Intel's transistor count and die size are unknown.
- Base Clock: Intel's base clock is 300 MHz; NVIDIA's is 2407 MHz.
- Boost Clock: Intel's boost clock is 2500 MHz; NVIDIA's is 2572 MHz.
- Memory Size: Intel uses system shared memory; NVIDIA has 8 GB.
- Memory Type: Intel uses system shared memory; NVIDIA uses GDDR7.
- Memory Bus Width: Intel's is system shared; NVIDIA's is 128 bit.
- Memory Bandwidth: Intel's is system dependent; NVIDIA's is 448.0 GB/s.
- Shading Units: Intel has 1536; NVIDIA has 4608.
- TMUs: Intel has 48; NVIDIA has 144.
- ROPs: Intel has 24; NVIDIA has 48.
- RT Cores: Intel has 12; NVIDIA has 36.
- Tensor Cores: Intel has none listed; NVIDIA has 144.
- Pixel Rate: Intel is 60.00 GPixel/s; NVIDIA is 123.5 GPixel/s.
- Texture Rate: Intel is 120.0 GTexel/s; NVIDIA is 370.4 GTexel/s.
- FP32 Performance: Intel is 7.680 TFLOPS; NVIDIA is 23.70 TFLOPS.
- FP16 Performance: Intel is 15.36 TFLOPS (2:1); NVIDIA is 23.70 TFLOPS (1:1).
- TDP: Intel is 80 W; NVIDIA is 180 W.
- Slot Width: Intel is IGP; NVIDIA is Dual-slot.
- Power Connectors: Intel has none; NVIDIA has 1x 8-pin.
- Suggested PSU: Intel has none; NVIDIA suggests 450 W.
- Bus Interface: Intel is IGP; NVIDIA is PCIe 5.0 x8.
- Display Outputs: Intel is portable device dependent; NVIDIA has 1x HDMI 2.1b and 3x DisplayPort 2.1b.
- Dimensions: Intel has no separate dimensions; NVIDIA is 241 mm x 111 mm x 40 mm.
- Release Date: Intel's is 2026-05-31; NVIDIA's is 2025-04-15.
Head-to-Head Benchmarks
The benchmark database contains no head-to-head benchmark results that directly compare the Intel Arc G3 Extreme and the NVIDIA GeForce RTX 5060 Ti 8 GB. The Intel part has no benchmark scores recorded, with an average benchmark score of 0. The NVIDIA card, however, has a comprehensive set of benchmark results.
The NVIDIA GeForce RTX 5060 Ti 8 GB's performance is quantified by its benchmark scores. In 3DMark Steel Nomad (DX12), it scores 4019. In Passmark tests, it scores 142 in DirectX 10, 220 in DirectX 11, 82 in DirectX 12, and 228 in DirectX 9. Its Passmark G2D score is 1169, and its G3D score is 21981. The GPU compute score is 11365. These results contribute to its average benchmark score of 4901.
The nearest rivals in the database for the NVIDIA card provide context for its score. The AMD FirePro W5130M has an average score of 4904, a delta of -0.1% compared to the NVIDIA card. The NVIDIA GeForce GTS 450 has an average score of 4893, a delta of 0.2%. The AMD Radeon R7 M265 and Radeon R7 M360 have scores of 4929 and 4931, with deltas of -0.6% and -0.6% respectively. These data points indicate that the RTX 5060 Ti 8 GB's performance is closely matched with these older or lower-tier mobile and desktop parts, with performance differences of less than one percent.
Given the absence of recorded scores for the Intel Arc G3 Extreme, a direct numerical comparison is impossible. The data instead shows a structural comparison. The NVIDIA card's FP32 compute throughput of 23.70 TFLOPS is more than triple the Intel part's 7.680 TFLOPS. Its pixel rate of 123.5 GPixel/s is more than double the Intel part's 60.00 GPixel/s. Its texture rate of 370.4 GTexel/s is over three times the Intel part's 120.0 GTexel/s. These figures, derived from the specification data, indicate a decisive performance advantage for the dedicated NVIDIA graphics card across all measurable rendering tasks.