AMD Xbox Series X 6nm GPU vs NVIDIA GeForce RTX 4060 AD106 Comparison

AMD
RADEON

AMD Xbox Series X 6nm GPU

CORE STATE Scarlett 6nm
VRAM 10 GB
CLOCK SPEED —
TDP 200 W
BUS WIDTH 320 bit
ARCHITECTURE RDNA 2.0
nm
PROCESS 6 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 4060 AD106

CORE STATE AD106
VRAM 8 GB
CLOCK SPEED 2460 MHz
TDP 115 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

Analysis: AMD Xbox Series X 6nm GPU vs NVIDIA GeForce RTX 4060 AD106

Where Each One Wins

The AMD Xbox Series X 6nm GPU and the NVIDIA GeForce RTX 4060 AD106 occupy different corners of the performance spectrum, and the recorded data shows a clear split in their respective strengths. The AMD console chip, built on the RDNA 2.0 architecture, delivers its highest advantages in memory bandwidth and raw fillrate operations. With 560.0 GB/s of memory bandwidth against the NVIDIA part's 272.0 GB/s, the AMD GPU holds a substantial lead in any workload that saturates the memory subsystem. The texture rate of 379.6 GTexel/s versus 236.2 GTexel/s further reinforces this pattern, indicating that the AMD silicon is optimized for scenarios involving heavy texture sampling and large data movement.

The NVIDIA GeForce RTX 4060 AD106, conversely, wins in compute throughput and power efficiency. The FP32 throughput of 15.11 TFLOPS edges out the AMD part's 12.15 TFLOPS, a meaningful gap for shader-heavy workloads that rely on raw floating-point math. The pixel rate is nearly identical, with NVIDIA at 118.1 GPixel/s and AMD at 116.8 GPixel/s, so rasterization at the final output stage is essentially a tie. The NVIDIA card also carries dedicated hardware in the form of 24 ray tracing cores and 96 tensor cores, while the AMD console GPU lists no equivalent units in the database. This makes the RTX 4060 the only one of the two with explicit acceleration paths for ray tracing and AI-based features.

Power consumption is another decisive differentiator. The RTX 4060 AD106 draws 115 W under load, while the AMD console GPU is rated at 200 W. The NVIDIA part delivers higher FP32 throughput while consuming less than two-thirds of the power, which points to a significant efficiency advantage on a per-watt basis. The process node difference contributes to this: NVIDIA uses a 5 nm process, while AMD uses a 6 nm process from the same foundry.

Architecture Differences

The two GPUs diverge fundamentally in their underlying designs. The AMD Xbox Series X 6nm GPU uses the RDNA 2.0 architecture on a 6 nm process from TSMC. The chip, codenamed Scarlett 6nm, integrates 15,300 million transistors. The NVIDIA GeForce RTX 4060 AD106 uses the Ada Lovelace architecture on a 5 nm process, also from TSMC, and packs 22,900 million transistors into a die size of 188 mm². The transistor density for the NVIDIA chip is 121.8M per mm², a figure not available for the AMD part.

The compute configurations differ in scale and composition. The AMD GPU has 3328 shading units, 208 texture mapping units, and 64 ROPs. The NVIDIA GPU has 3072 shading units, 96 TMUs, and 48 ROPs. Despite having fewer shading units, the NVIDIA chip achieves higher FP32 throughput because of its higher clock speeds. The base clock on the RTX 4060 is 1830 MHz, with a boost clock of 2460 MHz. The AMD console GPU has no base or boost clock listed in the database, only a memory clock of 1750 MHz for 14 Gbps effective. The NVIDIA memory clock is 2125 MHz, translating to 17 Gbps effective.

Memory architecture presents a stark contrast. The AMD GPU uses 10 GB of GDDR6 on a 320-bit bus, yielding 560.0 GB/s of bandwidth. The NVIDIA GPU uses 8 GB of GDDR6 on a 128-bit bus, yielding 272.0 GB/s. The AMD part has more than double the bus width and more memory capacity, which explains its bandwidth advantage. The NVIDIA part compensates with a smaller memory footprint that aligns with its lower power envelope.

Feature sets also differ. The NVIDIA GPU includes 24 ray tracing cores and 96 tensor cores, providing dedicated hardware for ray-traced effects and tensor operations. The AMD GPU has no RT core or tensor core counts listed, though it supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.2. The NVIDIA part supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, a newer Vulkan revision. Display outputs show one HDMI 2.1 on the AMD side, while the NVIDIA card offers one HDMI 2.1 and three DisplayPort 1.4a outputs.

Physical and power characteristics also differ. The AMD GPU measures 301 mm by 151 mm by 151 mm and is rated at 200 W. The NVIDIA GPU is dual-slot, uses a 12-pin power connector, and specifies a 300 W suggested power supply. The NVIDIA card is end-of-life in production status, released on 2024-03-31, while the AMD console GPU remains active, released on 2024-10-14. The NVIDIA predecessor is GeForce 30 and its successor is GeForce 50.

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark scores for these two GPUs, so the comparison relies on the recorded specifications. In FP32 compute, the NVIDIA RTX 4060 AD106 delivers 15.11 TFLOPS against the AMD Xbox Series X 6nm GPU's 12.15 TFLOPS. This represents a 24.4% advantage for NVIDIA in raw shader throughput. The FP16 comparison shows a larger divergence in the other direction: the AMD part achieves 24.29 TFLOPS with a 2:1 ratio, while the NVIDIA part achieves 15.11 TFLOPS with a 1:1 ratio. For workloads that can exploit packed FP16 math, the AMD GPU holds a 60.8% lead, but for FP16 workloads that require full precision, the NVIDIA implementation is more consistent.

Memory bandwidth is the single largest gap in the data. The AMD GPU's 560.0 GB/s is 105.9% higher than the NVIDIA GPU's 272.0 GB/s. This advantage directly impacts texture throughput: the AMD part reaches 379.6 GTexel/s, which is 60.7% higher than the NVIDIA part's 236.2 GTexel/s. The pixel rate is nearly identical, with the NVIDIA card at 118.1 GPixel/s and the AMD card at 116.8 GPixel/s, a difference of just 1.1% in favor of NVIDIA.

The transistor counts tell a story of design priorities. The NVIDIA chip integrates 22,900 million transistors, 49.7% more than the AMD chip's 15,300 million, despite having fewer shading units. This extra transistor budget goes into the tensor cores, ray tracing cores, and the larger cache hierarchy typical of the Ada Lovelace architecture. The power envelope flips the efficiency picture: the NVIDIA GPU consumes 115 W, which is 42.5% less than the AMD GPU's 200 W, while delivering higher FP32 throughput.

The Verdict

The recorded data indicates that neither GPU dominates across all metrics; the choice depends on the workload. The AMD Xbox Series X 6nm GPU is the stronger option for memory-bound scenarios. Its 560.0 GB/s bandwidth and 379.6 GTexel/s texture rate give it a clear edge in applications that stream large textures or require frequent data access. The 10 GB memory capacity also provides more headroom for assets than the 8 GB on the NVIDIA part. The FP16 throughput of 24.29 TFLOPS makes it attractive for workloads that can use packed math.

The NVIDIA GeForce RTX 4060 AD106 is the better choice for compute-bound and feature-rich scenarios. Its 15.11 TFLOPS FP32 throughput exceeds the AMD part by 24.4%, and the dedicated ray tracing and tensor cores provide hardware acceleration paths that the AMD GPU lacks. The 115 W power draw is substantially lower, which makes it the more efficient option for sustained compute tasks. The newer Vulkan 1.4 support and the multi-display output options (one HDMI 2.1 plus three DisplayPort 1.4a) broaden its applicability outside a fixed console environment.

The production statuses differ: the AMD console GPU is active, while the NVIDIA part is end-of-life. The AMD GPU carries a launch MSRP of 599 USD, while the NVIDIA card has no launch MSRP recorded in the database. For a console-integrated solution, the AMD chip offers bandwidth and texture performance. For a discrete add-in card with ray tracing and tensor hardware, the NVIDIA chip offers compute throughput and efficiency. The data supports a clear delineation: bandwidth and texture-heavy workloads favor AMD, while FP32 compute and feature-rich rendering favor NVIDIA.

FAQ

Q: Which GPU has higher memory bandwidth?

A: The AMD Xbox Series X 6nm GPU has 560.0 GB/s of bandwidth, more than double the NVIDIA GeForce RTX 4060 AD106's 272.0 GB/s.

Q: How do the FP32 compute figures compare?

A: The NVIDIA GPU delivers 15.11 TFLOPS, which is 24.4% higher than the AMD GPU's 12.15 TFLOPS.

Q: Does the NVIDIA card have dedicated ray tracing hardware?

A: Yes, the NVIDIA GeForce RTX 4060 AD106 includes 24 ray tracing cores and 96 tensor cores. The AMD Xbox Series X 6nm GPU has no RT core or tensor core counts listed in the database.

Q: What is the power consumption difference?

A: The NVIDIA GPU is rated at 115 W, while the AMD GPU is rated at 200 W, making the NVIDIA part significantly more power-efficient.

Q: What are the memory capacities and bus widths?

A: The AMD GPU has 10 GB of GDDR6 on a 320-bit bus. The NVIDIA GPU has 8 GB of GDDR6 on a 128-bit bus.

Q: Which GPU supports a newer Vulkan version?

A: The NVIDIA GeForce RTX 4060 AD106 supports Vulkan 1.4, while the AMD Xbox Series X 6nm GPU supports Vulkan 1.2.

DETAILED SPECIFICATIONS

SPECIFICATION
Xbox Series X 6nm GPU
RTX 4060 AD106
Core Specs
Shading Units
3,328
3,072 -7.7%
Shaders
3,328
3,072 -7.7%
TMUs
208
96 -53.8%
ROPs
64
48 -25.0%
Compute Units
52
—
SM Count
—
24
Clocks
Base Clock
—
1830 MHz
Boost Clock
—
2460 MHz
GPU Clock
1825 MHz
—
Memory Clock
1750 MHz 14 Gbps effective
2125 MHz 17 Gbps effective
Memory
Memory Size
10 GB
8 GB
VRAM (MB)
10,240
8,192 -20.0%
Memory Type
GDDR6
GDDR6
Memory Bus
320 bit
128 bit
Bandwidth
560.0 GB/s
272.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
5 MB
24 MB
Performance
Pixel Rate
116.8 GPixel/s
118.1 GPixel/s
Texture Rate
379.6 GTexel/s
236.2 GTexel/s
FP32 (TFLOPS)
12.15 TFLOPS
15.11 TFLOPS
FP64 (TFLOPS)
759.2 GFLOPS (1:16)
236.2 GFLOPS (1:64)
FP16 (TFLOPS)
24.29 TFLOPS (2:1)
15.11 TFLOPS (1:1)
AI/RT
RT Cores
—
24
Tensor Cores
—
96
Power
TDP
200 W
115 W
TDP (W)
200
115 -42.5%
Suggested PSU
—
300 W
Power Connectors
—
1x 12-pin
Architecture
Architecture
RDNA 2.0
Ada Lovelace
GPU Name
Scarlett 6nm
AD106
Generation
Console GPU (Microsoft)
GeForce 40
Process Size
6 nm
5 nm
Transistors
15,300 million
22,900 million
Die Size
unknown
188 mm²
Foundry
TSMC
TSMC
Density
—
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2
1.4
OpenCL
1.2
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
—
Dual-slot
Length
301 mm 11.9 inches
—
Height
151 mm 5.9 inches
—
Outputs
1x HDMI 2.1
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
—
PCIe 4.0 x8
Other
Launch Price
599 USD
—
Production
Active
End-of-life
Predecessor
—
GeForce 30
Successor
—
GeForce 50
View Xbox Series X 6nm GPU Details View GeForce RTX 4060 AD106 Details