AMD Ryzen Z2 A GPU vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison
AMD Ryzen Z2 A GPU
GeForce RTX 4060 Ti AD104
Analysis: AMD Ryzen Z2 A GPU vs NVIDIA GeForce RTX 4060 Ti AD104
Where Each One Wins
The AMD Ryzen Z2 A GPU and the NVIDIA GeForce RTX 4060 Ti AD104 occupy entirely different corners of the GPU landscape, and the recorded data makes that split unmistakable. The Ryzen Z2 A is built around a 15 W TDP, which positions it for low-power, embedded, or handheld-class workloads where energy draw is the dominant constraint. The RTX 4060 Ti AD104, by contrast, carries a 160 W TDP and is designed for conventional desktop use in a dual-slot form factor with a 16-pin power connector.
In terms of raw compute, the RTX 4060 Ti AD104 wins decisively across every measured metric. It delivers 22.06 TFLOPS of FP32 performance against the Ryzen Z2 A's 1.638 TFLOPS, a gap of roughly 13.5 times. The NVIDIA part also leads in pixel throughput, 121.7 GPixel/s versus 25.60 GPixel/s, and texture throughput, 344.8 GTexel/s versus 51.20 GTexel/s. These are not close contests; the RTX 4060 Ti AD104 is in a different performance class entirely.
The Ryzen Z2 A does hold advantages in specific areas, but those advantages are tied to its design goals rather than to computational dominance. It offers 16 GB of LPDDR5 memory, double the 8 GB of GDDR6 found on the RTX 4060 Ti AD104. That larger memory pool, combined with a 15 W power envelope, makes it suited for scenarios where capacity and efficiency matter more than bandwidth or peak throughput. The RTX 4060 Ti AD104 counters with 288.0 GB/s of memory bandwidth, nearly three times the 102.4 GB/s of the AMD part, so the NVIDIA card moves data far faster despite holding half the capacity.
The use-case split is clear. The RTX 4060 Ti AD104 wins where frame rates, resolution headroom, and compute-heavy workloads dominate. The Ryzen Z2 A wins where power draw is the limiting factor and where a larger framebuffer with lower bandwidth is an acceptable trade-off. Both are active or recently active products, with the AMD part listed as Active and the NVIDIA part as End-of-life, but their benchmark percentiles against all GPUs are identical at 50, which reflects their divergent positioning rather than any equivalence in raw speed.
Architecture Differences
The two GPUs come from different architectural generations and use different manufacturing processes. The Ryzen Z2 A is based on AMD's RDNA 2.0 architecture, built on a 7 nm process at TSMC with 2,400 million transistors on a 163 mm² die. The RTX 4060 Ti AD104 uses NVIDIA's Ada Lovelace architecture, built on a 5 nm process at TSMC with 35,800 million transistors on a 294 mm² die. The transistor density figures confirm the process gap: the NVIDIA part packs 121.8 million transistors per square millimeter, while the AMD part reaches 14.7 million per square millimeter.
Core configuration differences are substantial. The RTX 4060 Ti AD104 has 4,352 shading units, 136 texture mapping units, and 48 raster output units. The Ryzen Z2 A has 512 shading units, 32 TMUs, and 16 ROPs. Ray tracing hardware follows the same pattern, with the NVIDIA card featuring 34 RT cores and 136 tensor cores, while the AMD part has 8 RT cores and no tensor core field in the database. The NVIDIA card also supports FP16 at a 1:1 ratio with FP32, both at 22.06 TFLOPS, whereas the AMD part runs FP16 at 2:1 relative to its FP32 figure, yielding 3.277 TFLOPS.
Clock speeds reflect their different power targets. The Ryzen Z2 A runs at a 1000 MHz base and 1600 MHz boost, while the RTX 4060 Ti AD104 runs at 2310 MHz base and 2535 MHz boost. Memory technology differs as well: the AMD part uses LPDDR5 at 800 MHz with 6.4 Gbps effective, while the NVIDIA part uses GDDR6 at 2250 MHz with 18 Gbps effective. Both use a 128 bit memory bus, but the NVIDIA memory clock is high enough to produce 288.0 GB/s of bandwidth versus 102.4 GB/s.
Physical and interface details also diverge. The RTX 4060 Ti AD104 is a dual-slot card measuring 240 mm in length, 111 mm in height, and 40 mm in width, with a PCIe 4.0 x8 interface and outputs of 1x HDMI 2.1 and 3x DisplayPort 1.4a. The Ryzen Z2 A has no listed slot width, dimensions, or bus interface, and its only display output is 1x USB Type-C. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The NVIDIA card requires a 450 W suggested PSU and uses a 16-pin connector, while the AMD part lists no power connector requirements.
Head-to-Head Benchmarks
The database contains no recorded head-to-head benchmark entries for these two GPUs, and neither part has individual benchmark scores listed. The gap in their specifications, however, allows for direct quantitative comparison across every published metric.
The largest single-metric win for the RTX 4060 Ti AD104 is in FP32 compute. Its 22.06 TFLOPS is approximately 13.5 times the 1.638 TFLOPS of the Ryzen Z2 A. Texture rate tells a similar story, with 344.8 GTexel/s representing a 6.7 times advantage over 51.20 GTexel/s. Pixel rate favors the NVIDIA card by 4.8 times, 121.7 GPixel/s versus 25.60 GPixel/s. Memory bandwidth is 2.8 times higher on the NVIDIA side, 288.0 GB/s versus 102.4 GB/s.
The Ryzen Z2 A wins on memory capacity, offering 16 GB versus 8 GB, and on power efficiency in absolute terms, drawing 15 W against the RTX 4060 Ti AD104's 160 W. The AMD part also has a higher transistor count per watt if calculated from the listed figures, though the database does not provide such a derived metric. Its 2,400 million transistors at 15 W contrasts with the NVIDIA card's 35,800 million at 160 W, which indicates the AMD design achieves its compute output with far fewer resources and far less energy.
Clock speed differences reinforce the NVIDIA advantage. The RTX 4060 Ti AD104 boosts to 2535 MHz, while the Ryzen Z2 A reaches only 1600 MHz. Even the NVIDIA base clock of 2310 MHz is higher than the AMD boost clock. The RT core count, 34 versus 8, suggests a large gap in ray tracing throughput, though no benchmark scores confirm this directly. Tensor core availability on the NVIDIA part, 136 cores, gives it dedicated AI acceleration hardware that the AMD part lacks entirely.
FAQ
Q: Which GPU has more memory?
A: The AMD Ryzen Z2 A GPU has 16 GB of LPDDR5 memory, while the NVIDIA GeForce RTX 4060 Ti AD104 has 8 GB of GDDR6 memory.
Q: How do their power requirements compare?
A: The Ryzen Z2 A has a 15 W TDP, while the RTX 4060 Ti AD104 has a 160 W TDP and a suggested PSU rating of 450 W. The NVIDIA card uses a 16-pin power connector; the AMD part lists no power connector.
Q: Which GPU has higher memory bandwidth?
A: The RTX 4060 Ti AD104 delivers 288.0 GB/s of bandwidth, compared to 102.4 GB/s for the Ryzen Z2 A. Both use a 128 bit memory bus.
Q: Does the RTX 4060 Ti AD104 support tensor operations?
A: Yes, it has 136 tensor cores. The Ryzen Z2 A has no tensor core data listed in the database.
Q: What are the display output options?
A: The RTX 4060 Ti AD104 offers 1x HDMI 2.1 and 3x DisplayPort 1.4a. The Ryzen Z2 A offers a single 1x USB Type-C output.
Q: Are both GPUs DirectX 12 Ultimate compatible?
A: Yes, both support DirectX 12 Ultimate (12_2), along with OpenGL 4.6 and Vulkan 1.4.
Specification Differences
| Specification | AMD Ryzen Z2 A GPU | NVIDIA GeForce RTX 4060 Ti AD104 |
|---|---|---|
| Architecture | RDNA 2.0 | Ada Lovelace |
| Process node | 7 nm | 5 nm |
| Transistors | 2,400 million | 35,800 million |
| Die size | 163 mm² | 294 mm² |
| Transistor density | 14.7M / mm² | 121.8M / mm² |
| Base clock | 1000 MHz | 2310 MHz |
| Boost clock | 1600 MHz | 2535 MHz |
| Memory clock | 800 MHz, 6.4 Gbps effective | 2250 MHz, 18 Gbps effective |
| Memory size | 16 GB | 8 GB |
| Memory type | LPDDR5 | GDDR6 |
| Memory bandwidth | 102.4 GB/s | 288.0 GB/s |
| Shading units | 512 | 4,352 |
| TMUs | 32 | 136 |
| ROPs | 16 | 48 |
| RT cores | 8 | 34 |
| Tensor cores | Not listed | 136 |
| Pixel rate | 25.60 GPixel/s | 121.7 GPixel/s |
| Texture rate | 51.20 GTexel/s | 344.8 GTexel/s |
| FP32 performance | 1.638 TFLOPS | 22.06 TFLOPS |
| FP16 performance | 3.277 TFLOPS (2:1) | 22.06 TFLOPS (1:1) |
| TDP | 15 W | 160 W |
| Slot width | Not listed | Dual-slot |
| Power connector | Not listed | 1x 16-pin |
| Suggested PSU | Not listed | 450 W |
| Bus interface | Not listed | PCIe 4.0 x8 |
| Display outputs | 1x USB Type-C | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| Dimensions | Not listed | 240 mm x 111 mm x 40 mm |
| Production status | Active | End-of-life |
| Launch MSRP | Not listed | 399 USD |