AMD Radeon RX 9070 vs Intel Arc G3 Comparison

Head-to-Head Benchmarks

The AMD Radeon RX 9070 and Intel Arc G3 occupy entirely different tiers of the graphics spectrum, and the recorded data reflects a decisive performance gap. The RX 9070 delivers an average benchmark score of 23877 across the database's test suite, while the Arc G3 has no recorded benchmark scores, registering an average of 0. This absence of data for the Intel part means there are no direct head-to-head wins to report for the Arc G3. Instead, the comparison is defined by the RX 9070's absolute dominance in every measurable category.

The RX 9070's percentile ranking of 69 among all GPUs places it above the median, and its nearest rivals confirm its standing. It sits 0.6% ahead of the NVIDIA GeForce GTX TITAN Z, which posts an average score of 23736. Against the AMD Radeon RX 6800S, the RX 9070 trails by 0.8%, with that rival scoring 24063. The NVIDIA GeForce RTX 3080 Mobile is 1.1% behind, at 23628, while the RTX 2080 SUPER leads by 1.2% with a score of 24170. These margins, all within roughly one percentage point, show the RX 9070 clustering tightly with high-end mobile and previous-generation desktop parts.

In raw compute tests, the RX 9070's scores are substantial. Its 3DMark Steel Nomad DX12 result of 6290 indicates strong DirectX 12 performance. Geekbench results show 131539 in OpenCL and 58705 in Vulkan, demonstrating robust compute throughput across both APIs. Passmark results further detail its capabilities: 25381 in G3D, 14737 in GPU compute, 1280 in G2D, and lower scores in legacy DX10, DX11, and DX9 tests at 141, 281, and 343 respectively. The DX12 result of 74 is notably lower, which may reflect test methodology rather than actual capability, given the card's modern architecture.

The Intel Arc G3, by contrast, has no benchmark entries in the database. Its percentile rank of 50 places it at the median by default, but this is a placeholder figure rather than a measured performance level. With no scores to analyze, the data cannot confirm any specific win for the Arc G3 in any test scenario. The RX 9070 therefore holds every recorded advantage by default, and the only meaningful comparison comes from the RX 9070's proximity to its named rivals.

Where Each One Wins

The RX 9070 wins in every scenario where the database has recorded performance data. Its strong showing in 3DMark Steel Nomad suggests it is suited for high-fidelity DirectX 12 gaming workloads, where modern rendering techniques and ray tracing are prevalent. The Geekbench OpenCL score of 131539 indicates excellent general-purpose compute performance, which benefits tasks like video encoding, scientific simulations, and machine learning inference. The Vulkan score of 58705 reinforces its capability in cross-platform graphics APIs, making it viable for games and applications that leverage Vulkan for lower overhead and better multi-threading.

Passmark G3D at 25381 and GPU compute at 14737 further confirm that the RX 9070 excels in both rasterized gaming and compute-heavy applications. Its high pixel rate of 322.6 GPixel/s and texture rate of 564.5 GTexel/s, derived from its 128 ROPs and 224 TMUs, indicate strong fill-rate performance for high-resolution rendering. The 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth, ensures it can handle large textures and data sets without bottlenecking.

The Intel Arc G3, with no benchmark scores, cannot claim a win in any measured category. Its specifications suggest it is designed for integrated graphics duties, as indicated by its "IGP" slot width and system-shared memory, but without data, any performance assessment is impossible. In scenarios where the Arc G3 might theoretically compete, such as low-power portable devices, the database provides no evidence of wins. The RX 9070 wins in all recorded gaming, compute, and synthetic test categories, while the Arc G3's strengths remain unquantified.

Architecture Differences

The architectural divide between these two GPUs is stark. The AMD Radeon RX 9070 uses the Navi 48 chip built on RDNA 4.0 architecture, manufactured on a 4 nm process at TSMC. It belongs to the Navi IV (RX 9000) generation and succeeds the Navi III line. The chip contains 53,900 million transistors on a 357 mm² die, yielding a transistor density of 151.0M per mm². This is a large, high-power discrete GPU designed for desktop use.

The Intel Arc G3 uses the Panther Lake chip on Xe3-LPG architecture, manufactured on a 3 nm process at Intel's own foundry. Its transistor count and die size are listed as unknown, and its generation is Arc Graphics-M (Panther Lake). This is an integrated graphics processor, as shown by its "IGP" bus interface and slot width, with a power draw of just 25 W compared to the RX 9070's 220 W. The Arc G3 relies on system-shared memory, with bandwidth described as system dependent, whereas the RX 9070 has dedicated 16 GB of GDDR6.

The RX 9070 has 3584 shading units, 224 texture mapping units, and 128 ROPs, along with 56 ray tracing cores. It delivers 36.13 TFLOPS of FP32 performance and the same for FP16 at a 1:1 ratio. The Arc G3 has 1280 shading units, 40 TMUs, and 20 ROPs, with 10 ray tracing cores. Its FP32 throughput is 6.144 TFLOPS, and its FP16 is 12.29 TFLOPS at a 2:1 ratio, indicating a different compute balance where FP16 is prioritized.

Clock speeds differ significantly. The RX 9070 runs at a base of 1330 MHz, a boost of 2520 MHz, and a game clock of 2070 MHz, with memory at 2518 MHz or 20.1 Gbps effective. The Arc G3 has a base of 300 MHz and a boost of 2400 MHz, with no game clock specified. The RX 9070's pixel rate of 322.6 GPixel/s dwarfs the Arc G3's 48.00 GPixel/s, and its texture rate of 564.5 GTexel/s far exceeds the Arc G3's 96.00 GTexel/s. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API feature parity exists despite the hardware disparity.

The RX 9070 uses dual-slot cooling with 2x 8-pin power connectors and requires a 550 W suggested PSU. It connects via PCIe 5.0 x16 and offers 1x HDMI 2.1b and 3x DisplayPort 2.1a outputs. The Arc G3 uses no power connectors, is listed as IGP, and its display outputs are portable device dependent, reflecting its integration into mobile processors.

The Verdict

The data clearly indicates that the AMD Radeon RX 9070 is a high-performance discrete GPU for desktop systems, while the Intel Arc G3 is a low-power integrated solution for portable devices. The RX 9070's average benchmark score of 23877 and its 69th percentile ranking among all GPUs place it in the upper mid-range to high-end tier. Its nearest rivals, all within 1.2% of its average score, confirm that it competes with parts like the RTX 2080 SUPER and RX 6800S, making it a suitable choice for demanding gaming and compute workloads.

The Arc G3, with no benchmark scores and a 50th percentile placeholder ranking, cannot be positioned relative to any competitors. Its specifications, including 25 W TDP and system-shared memory, point to a role in thin-and-light laptops or low-power devices where battery life and heat are priorities over raw performance. The 6.144 TFLOPS FP32 figure is roughly one-sixth of the RX 9070's 36.13 TFLOPS, and its 48.00 GPixel/s pixel rate is a fraction of the RX 9070's 322.6 GPixel/s.

For users seeking a discrete graphics card for gaming, content creation, or compute tasks, the RX 9070 is the only option with measured performance data to support its capabilities. Its 16 GB memory capacity and 644.6 GB/s bandwidth provide ample headroom for modern titles and large datasets. For users needing integrated graphics in a portable device, the Arc G3 exists as a lower-power alternative, but the database cannot verify its real-world performance. The choice is straightforward: the RX 9070 for performance, and the Arc G3 for efficiency where performance expectations are minimal.

FAQ

Q: What is the average benchmark score of the AMD Radeon RX 9070?

A: The RX 9070 has an average benchmark score of 23877 across all recorded tests.

Q: Does the Intel Arc G3 have any benchmark scores in the database?

A: No, the Arc G3 has no recorded benchmark scores, and its average benchmark score is 0.

Q: How does the RX 9070 compare to its nearest rival, the NVIDIA GeForce RTX 2080 SUPER?

A: The RX 9070 trails the RTX 2080 SUPER by 1.2%, with the RTX 2080 SUPER scoring 24170 compared to the RX 9070's 23877 average.

Q: What is the memory configuration of the Intel Arc G3?

A: The Arc G3 uses system-shared memory, with its type, bus width, and bandwidth all listed as system dependent.

Q: Which GPU has a higher FP32 compute throughput?

A: The RX 9070 delivers 36.13 TFLOPS of FP32, which is significantly higher than the Arc G3's 6.144 TFLOPS.

Q: What is the power consumption of each GPU?

A: The RX 9070 has a TDP of 220 W, while the Arc G3 has a TDP of 25 W.

Specification Differences

| Specification | AMD Radeon RX 9070 | Intel Arc G3 |

|---|---|---|

| Architecture | RDNA 4.0 | Xe3-LPG |

| Process Node | 4 nm | 3 nm |

| Foundry | TSMC | Intel |

| Transistors | 53,900 million | unknown |

| Die Size | 357 mm² | unknown |

| Base Clock | 1330 MHz | 300 MHz |

| Boost Clock | 2520 MHz | 2400 MHz |

| Game Clock | 2070 MHz | null |

| Memory Size | 16 GB | System Shared |

| Memory Type | GDDR6 | System Shared |

| Memory Bus Width | 256 bit | System Shared |

| Memory Bandwidth | 644.6 GB/s | System Dependent |

| Shading Units | 3584 | 1280 |

| TMUs | 224 | 40 |

| ROPs | 128 | 20 |

| Ray Tracing Cores | 56 | 10 |

| Pixel Rate | 322.6 GPixel/s | 48.00 GPixel/s |

| Texture Rate | 564.5 GTexel/s | 96.00 GTexel/s |

| FP32 Performance | 36.13 TFLOPS | 6.144 TFLOPS |

| FP16 Performance | 36.13 TFLOPS (1:1) | 12.29 TFLOPS (2:1) |

| TDP | 220 W | 25 W |

| Slot Width | Dual-slot | IGP |

| Power Connectors | 2x 8-pin | None |

| Suggested PSU | 550 W | null |

| Bus Interface | PCIe 5.0 x16 | IGP |

| Display Outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1a | Portable Device Dependent |

| Release Date | 2025-03-05 | 2026-05-31 |