AMD Radeon RX 9060 XT LP vs NVIDIA GeForce RTX 3050 A Mobile Comparison

AMD
RADEON

AMD Radeon RX 9060 XT LP

CORE STATE Navi 44
VRAM 16 GB
CLOCK SPEED 3050 MHz
TDP 140 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 3050 A Mobile

CORE STATE GA106
VRAM 4 GB
CLOCK SPEED 1343 MHz
TDP 45 W
BUS WIDTH 128 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
88,183
52,998
geekbench_vulkan
39,476
N/A
passmark_directx_10
N/A
61
passmark_directx_11
N/A
94
passmark_directx_12
N/A
55
passmark_directx_9
N/A
152
passmark_g2d
N/A
526
passmark_g3d
N/A
11,664
passmark_gpu_compute
N/A
4,419

Analysis: AMD Radeon RX 9060 XT LP vs NVIDIA GeForce RTX 3050 A Mobile

Head-to-Head Benchmarks

The single recorded head-to-head benchmark, Geekbench OpenCL, shows a decisive victory for the AMD Radeon RX 9060 XT LP. It scores 88,183, while the NVIDIA GeForce RTX 3050 A Mobile scores 52,998. This represents a 66.4% delta in favor of the AMD part, a substantial margin that sets the tone for the entire comparison.

Looking at the aggregate data, the AMD Radeon RX 9060 XT LP maintains an average benchmark score of 63,830 across all recorded tests, placing it in the 89th percentile of all GPUs in the database. The NVIDIA GeForce RTX 3050 A Mobile, by contrast, has an average benchmark score of only 8,746, placing it in the 44th percentile. This is not a close contest; the AMD card outperforms the NVIDIA mobile GPU by a factor of roughly 7.3 in average scoring.

The AMD Radeon RX 9060 XT LP also has a secondary benchmark result in Geekbench Vulkan, scoring 39,476. This test was not run on the NVIDIA part, so no direct comparison exists, but it reinforces the AMD card's strong compute capabilities. The NVIDIA GeForce RTX 3050 A Mobile has its own set of DirectX and compute benchmarks, including a Passmark G3D score of 11,664 and a Passmark GPU Compute score of 4,419. These figures, while internally consistent for the NVIDIA part, are far below the AMD card's raw OpenCL output.

The nearest rivals in the database further contextualize the AMD card's standing. The AMD Radeon RX 9060 XT LP sits within 0.6% of the AMD Radeon Pro WX 9100 (which scores 64,212) and within 0.2% of the AMD Radeon Pro Vega 56 (63,693). It is essentially tied with the NVIDIA CMP 30HX (63,842) and the AMD Radeon RX 7600M (63,775). These are all desktop or high-performance mobile parts, indicating the RX 9060 XT LP competes well above its low-profile form factor.

For the NVIDIA GeForce RTX 3050 A Mobile, its nearest rivals are far less powerful. It is essentially tied with the NVIDIA GeForce GTX 460 v2 (8,743), within 0.7% of the NVIDIA Quadro P2200 (8,686), and within 1.3% of the AMD Radeon Pro WX 5100 (8,863). These are older or lower-tier parts, confirming that the RTX 3050 A Mobile is positioned at the entry level of the database's performance spectrum.

Where Each One Wins

The AMD Radeon RX 9060 XT LP wins every head-to-head comparison available. In the single direct benchmark, Geekbench OpenCL, it is 66.4% faster than the NVIDIA GeForce RTX 3050 A Mobile. The AMD card also delivers a Geekbench Vulkan score of 39,476, a result the NVIDIA part cannot match, as it has no recorded Vulkan benchmark. The AMD card's average benchmark score of 63,830 places it in the 89th percentile, while the NVIDIA part's 8,746 average places it in the 44th percentile.

The NVIDIA GeForce RTX 3050 A Mobile does have a broader set of recorded benchmarks, including Passmark tests for DirectX 9, 10, 11, and 12, plus G2D, G3D, and GPU Compute. Its highest DirectX score is 152 in DirectX 9, and its G3D score is 11,664. However, none of these approach the AMD card's OpenCL output, and the AMD card lacks these specific Passmark results, so no direct cross-format comparison is possible. The data indicates the AMD card wins on raw compute and modern API performance, while the NVIDIA part only offers more legacy API coverage, which does not translate into competitive performance.

In terms of use cases, the AMD Radeon RX 9060 XT LP is suited for tasks requiring high compute throughput, such as OpenCL-based workloads, given its 66.4% lead in that specific test. The NVIDIA part, with its Passmark DirectX 9 score of 152 and DirectX 11 score of 94, might handle older DirectX titles, but even there, the scores are low in absolute terms. The AMD card's 89th percentile ranking suggests it handles a wide range of modern workloads well, while the NVIDIA part's 44th percentile places it near the median of all GPUs, indicating mid-tier or lower performance.

Architecture Differences

The two GPUs come from fundamentally different design philosophies and process nodes. The AMD Radeon RX 9060 XT LP uses the Navi 44 chip based on RDNA 4.0 architecture, manufactured on a 4 nm TSMC process. It contains 29,700 million transistors on a 199 mm² die, yielding a transistor density of 149.2 million per square millimeter. The NVIDIA GeForce RTX 3050 A Mobile uses the GA106 chip based on Ampere architecture, manufactured on an 8 nm Samsung process. It contains 12,000 million transistors on a 276 mm² die, yielding a transistor density of 43.5 million per square millimeter. The AMD chip is significantly denser and smaller, reflecting the more advanced process node.

Clock speeds differ notably. The AMD card has a base clock of 1380 MHz and a boost clock of 3050 MHz, with a game clock of 2450 MHz. The NVIDIA part has a base clock of 1065 MHz and a boost clock of 1343 MHz. The AMD card's boost clock is more than double the NVIDIA part's, which contributes heavily to its performance advantage. Memory clocks also differ: the AMD card runs at 2518 MHz (20.1 Gbps effective), while the NVIDIA part runs at 1500 MHz (12 Gbps effective).

Memory configuration is another major divergence. The AMD Radeon RX 9060 XT LP has 16 GB of GDDR6 memory on a 128-bit bus, delivering 322.3 GB/s of bandwidth. The NVIDIA GeForce RTX 3050 A Mobile has 4 GB of GDDR6 memory on a 128-bit bus, delivering 192.0 GB/s of bandwidth. The AMD card has four times the capacity and 67.9% more bandwidth.

Compute resources also favor AMD. The RX 9060 XT LP has 2048 shading units, 128 texture mapping units, 64 render output units, and 32 ray tracing cores. The RTX 3050 A Mobile has 1792 shading units, 56 TMUs, 32 ROPs, and 14 ray tracing cores, plus 56 tensor cores. The AMD card has more shading units, more than double the TMUs, double the ROPs, and more than double the ray tracing cores. Pixel rates are 195.2 GPixel/s for AMD versus 42.98 GPixel/s for NVIDIA, and texture rates are 390.4 GTexel/s versus 75.21 GTexel/s. FP32 performance is 24.99 TFLOPS for AMD versus 4.813 TFLOPS for NVIDIA.

Power and form factor differ as well. The AMD card has a TDP of 140 W, is dual-slot, uses a single 8-pin power connector, and requires a 300 W suggested PSU. It uses a PCIe 5.0 x16 interface and has display outputs of 1x HDMI 2.1b and 2x DisplayPort 2.1a. The NVIDIA part has a TDP of 45 W, is an IGP (integrated graphics processor), has no power connectors, and uses a PCIe 4.0 x8 interface with display outputs described as "Portable Device Dependent." The AMD card is a discrete, power-hungry add-in card, while the NVIDIA part is a low-power mobile component.

Production status also differs: the AMD card is listed as Active with a release date of 2025-12-16, while the NVIDIA part is End-of-life with a release date of 2023-12-31. Both use the same API set: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The Verdict

The data is unambiguous: the AMD Radeon RX 9060 XT LP outperforms the NVIDIA GeForce RTX 3050 A Mobile across every metric where a direct comparison exists. The 66.4% lead in Geekbench OpenCL, combined with the 89th versus 44th percentile ranking and the 63,830 versus 8,746 average benchmark score, shows a GPU that is in a different performance class entirely.

The AMD card is the choice for anyone requiring high compute throughput, modern API support, and substantial memory capacity. Its 16 GB of GDDR6 memory and 322.3 GB/s bandwidth support large datasets and high-resolution textures. Its 24.99 TFLOPS of FP32 performance and 32 ray tracing cores make it suitable for demanding workloads, from compute acceleration to modern gaming.

The NVIDIA GeForce RTX 3050 A Mobile is a low-power part, with a 45 W TDP and no power connectors, designed for portable devices. Its 4 GB memory and 192.0 GB/s bandwidth are limited, and its 4.813 TFLOPS FP32 performance is only a fraction of the AMD card's. Its only advantage is its power envelope, which suits thin-and-light laptops, but the performance data shows it cannot compete on any compute or graphics benchmark.

For users choosing between these two, the AMD Radeon RX 9060 XT LP is the clear winner on performance. The NVIDIA part is only viable if power consumption is the absolute priority and performance is secondary, but even then, the 44th percentile ranking indicates it is a middling performer. The AMD card's active production status and newer release date also suggest it is the more current product.

FAQ

Q: Which GPU has the higher Geekbench OpenCL score?

A: The AMD Radeon RX 9060 XT LP scores 88,183, which is 66.4% higher than the NVIDIA GeForce RTX 3050 A Mobile's 52,998.

Q: What is the memory capacity of each GPU?

A: The AMD Radeon RX 9060 XT LP has 16 GB of GDDR6 memory, while the NVIDIA GeForce RTX 3050 A Mobile has 4 GB of GDDR6 memory.

Q: How do the process nodes compare?

A: The AMD Radeon RX 9060 XT LP uses a 4 nm TSMC process, while the NVIDIA GeForce RTX 3050 A Mobile uses an 8 nm Samsung process.

Q: What is the TDP difference?

A: The AMD Radeon RX 9060 XT LP has a TDP of 140 W, while the NVIDIA GeForce RTX 3050 A Mobile has a TDP of 45 W.

Q: Which GPU has more ray tracing cores?

A: The AMD Radeon RX 9060 XT LP has 32 ray tracing cores, while the NVIDIA GeForce RTX 3050 A Mobile has 14.

Q: What is the average benchmark score for each GPU?

A: The AMD Radeon RX 9060 XT LP has an average benchmark score of 63,830, placing it in the 89th percentile, while the NVIDIA GeForce RTX 3050 A Mobile has an average score of 8,746, placing it in the 44th percentile.

Specification Differences

| Specification | AMD Radeon RX 9060 XT LP | NVIDIA GeForce RTX 3050 A Mobile |

| --- | --- | --- |

| Chip | Navi 44 | GA106 |

| Architecture | RDNA 4.0 | Ampere |

| Process Node | 4 nm | 8 nm |

| Foundry | TSMC | Samsung |

| Transistors | 29,700 million | 12,000 million |

| Die Size | 199 mm² | 276 mm² |

| Transistor Density | 149.2M / mm² | 43.5M / mm² |

| Base Clock | 1380 MHz | 1065 MHz |

| Boost Clock | 3050 MHz | 1343 MHz |

| Game Clock | 2450 MHz | None |

| Memory Size | 16 GB | 4 GB |

| Memory Type | GDDR6 | GDDR6 |

| Memory Bus Width | 128 bit | 128 bit |

| Memory Bandwidth | 322.3 GB/s | 192.0 GB/s |

| Shading Units | 2048 | 1792 |

| TMUs | 128 | 56 |

| ROPs | 64 | 32 |

| Ray Tracing Cores | 32 | 14 |

| Tensor Cores | None | 56 |

| Pixel Rate | 195.2 GPixel/s | 42.98 GPixel/s |

| Texture Rate | 390.4 GTexel/s | 75.21 GTexel/s |

| FP32 Performance | 24.99 TFLOPS | 4.813 TFLOPS |

| FP16 Performance | 24.99 TFLOPS (1:1) | 4.813 TFLOPS (1:1) |

| TDP | 140 W | 45 W |

| Slot Width | Dual-slot | IGP |

| Power Connectors | 1x 8-pin | None |

| Suggested PSU | 300 W | None |

| Bus Interface | PCIe 5.0 x16 | PCIe 4.0 x8 |

| Display Outputs | 1x HDMI 2.1b, 2x DisplayPort 2.1a | Portable Device Dependent |

| Production Status | Active | End-of-life |

| Release Date | 2025-12-16 | 2023-12-31 |

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9060 XT LP
RTX 3050 A Mobile
Core Specs
Shading Units
2,048
1,792 -12.5%
Shaders
2,048
1,792 -12.5%
TMUs
128
56 -56.3%
ROPs
64
32 -50.0%
Compute Units
32
—
SM Count
—
14
Clocks
Base Clock
1380 MHz
1065 MHz
Boost Clock
3050 MHz
1343 MHz
Game Clock
2450 MHz
—
Memory Clock
2518 MHz 20.1 Gbps effective
1500 MHz 12 Gbps effective
Memory
Memory Size
16 GB
4 GB
VRAM (MB)
16,384
4,096 -75.0%
Memory Type
GDDR6
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
322.3 GB/s
192.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
4 MB
2 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
195.2 GPixel/s
42.98 GPixel/s
Texture Rate
390.4 GTexel/s
75.21 GTexel/s
FP32 (TFLOPS)
24.99 TFLOPS
4.813 TFLOPS
FP64 (TFLOPS)
780.8 GFLOPS (1:32)
75.21 GFLOPS (1:64)
FP16 (TFLOPS)
24.99 TFLOPS (1:1)
4.813 TFLOPS (1:1)
AI/RT
RT Cores
32
14 -56.3%
Tensor Cores
—
56
Matrix Cores
64
—
Power
TDP
140 W
45 W
TDP (W)
140
45 -67.9%
Suggested PSU
300 W
—
Power Connectors
1x 8-pin
None
Architecture
Architecture
RDNA 4.0
Ampere
GPU Name
Navi 44
GA106
Generation
Navi IV (RX 9000)
GeForce 30 Mobile
Process Size
4 nm
8 nm
Transistors
29,700 million
12,000 million
Die Size
199 mm²
276 mm²
Foundry
TSMC
Samsung
Density
149.2M / mm²
43.5M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
8.6
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
IGP
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
Portable Device Dependent
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x8
Other
Production
Active
End-of-life
Predecessor
Navi III
GeForce 20 Mobile
View Radeon RX 9060 XT LP Details View GeForce RTX 3050 A Mobile Details