AMD Radeon RX 6950 XT vs AMD Radeon RX 9060 XT LP Comparison
AMD Radeon RX 6950 XT
Radeon RX 9060 XT LP
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 6950 XT vs AMD Radeon RX 9060 XT LP
AMD Radeon RX 9060 XT LP and AMD Radeon RX 6950 XT represent two distinct generations of AMD graphics technology, and the benchmark data shows a decisive performance gap between them. The RX 6950 XT, a former flagship from the Radeon RX 6000 series, holds an overwhelming advantage in the available head-to-head tests, while the RX 9060 XT LP, a low-profile entry from the newer RX 9000 series, offers a fundamentally different set of trade-offs in power, size, and technology.
Head-to-Head Benchmarks
The direct comparison between these two GPUs is stark, with the RX 6950 XT winning both available benchmark tests by substantial margins. In the Geekbench OpenCL test, the RX 6950 XT scores 205,998 points, while the RX 9060 XT LP manages 88,183 points. This represents a delta of -57.2% for the newer card, meaning the RX 6950 XT delivers more than twice the raw compute performance in this workload. The RX 9060 XT LP's score is not merely lower; it is positioned in a completely different performance tier, as evidenced by its average benchmark score of 63,830 compared to the RX 6950 XT's average of 58,392.
The gap widens even further in the Geekbench Vulkan test. Here, the RX 6950 XT scores 165,212 points, while the RX 9060 XT LP achieves only 39,476 points, a delta of -76.1%. This result shows that the performance disparity is not consistent across APIs; the RX 9060 XT LP falls further behind in Vulkan than it does in OpenCL, suggesting that its architectural differences have a more pronounced impact on certain workloads. It is important to note that the RX 9060 XT LP has only two benchmark entries in the data, while the RX 6950 XT has eleven, including 3DMark and Passmark results that are not available for comparison.
Despite the RX 6950 XT's clear victory in head-to-head testing, the percentile rankings tell a slightly more nuanced story. Both cards rank in the high 80s, with the RX 9060 XT LP at the 89th percentile and the RX 6950 XT at the 88th percentile. This means that while the RX 6950 XT is faster in these specific tests, the RX 9060 XT LP is not far behind in overall standing among all GPUs. The RX 9060 XT LP's nearest rivals include the NVIDIA CMP 30HX (avg score 63,842, delta 0%) and the AMD Radeon RX 7600M (avg score 63,775, delta 0.1%), while the RX 6950 XT sits near the NVIDIA P102-100 (avg score 58,528, delta -0.2%) and the Intel Arc A570M (avg score 58,239, delta 0.3%). This data suggests that the RX 9060 XT LP is a solid mid-range performer on average, even if it loses badly to the older flagship in peak compute tests.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The AMD Radeon RX 9060 XT LP has a higher average benchmark score of 63,830, compared to the AMD Radeon RX 6950 XT's average of 58,392. This is despite the RX 6950 XT winning both head-to-head tests, indicating that the RX 9060 XT LP's performance is more consistent across a broader range of benchmarks.
Q: How much faster is the RX 6950 XT in the Geekbench Vulkan test?
A: The RX 6950 XT scores 165,212 points in Geekbench Vulkan, while the RX 9060 XT LP scores 39,476 points. This gives the RX 6950 XT a 76.1% advantage over the RX 9060 XT LP in this specific test.
Q: What is the transistor density of each chip?
A: The RX 9060 XT LP, built on a 4 nm process, has a transistor density of 149.2 million transistors per square millimeter. The RX 6950 XT, built on a 7 nm process, has a much lower transistor density of 51.5 million transistors per square millimeter.
Q: Do both GPUs support the same DirectX version?
A: Yes, both the RX 9060 XT LP and the RX 6950 XT support DirectX 12 Ultimate (12_2), as well as OpenGL 4.6 and Vulkan 1.4. Their API support is identical.
Q: Which card has a higher boost clock?
A: The RX 9060 XT LP has a higher boost clock of 3050 MHz, compared to the RX 6950 XT's boost clock of 2310 MHz. The RX 9060 XT LP also has a higher game clock of 2450 MHz versus 2100 MHz for the RX 6950 XT.
Q: What is the production status of each GPU?
A: The RX 9060 XT LP is listed as "Active" in production, while the RX 6950 XT is listed as "End-of-life." This indicates that the RX 9060 XT LP is a current product, whereas the RX 6950 XT has been discontinued.
Architecture Differences
The two GPUs are built on fundamentally different architectures and manufacturing processes. The RX 9060 XT LP uses the Navi 44 chip based on RDNA 4.0 architecture, fabricated on a 4 nm process by TSMC. This newer process allows for a significantly smaller die size of 199 mm², housing 29,700 million transistors. The RX 6950 XT, by contrast, uses the Navi 21 chip based on RDNA 2.0 architecture, fabricated on an older 7 nm process. This results in a much larger die size of 520 mm², containing 26,800 million transistors. The transistor density tells the story of process efficiency: the RX 9060 XT LP packs 149.2 million transistors per square millimeter, nearly three times the density of the RX 6950 XT's 51.5 million per square millimeter.
The compute unit configurations differ dramatically. The RX 9060 XT LP has 2048 shading units, 128 texture mapping units, 64 raster output units, and 32 ray tracing cores. The RX 6950 XT has significantly more hardware, with 5120 shading units, 320 TMUs, 128 ROPs, and 80 ray tracing cores. This explains the RX 6950 XT's raw throughput advantages in pixel rate (295.7 GPixel/s vs 195.2 GPixel/s) and texture rate (739.2 GTexel/s vs 390.4 GTexel/s). However, the FP32 floating-point performance is surprisingly close, with the RX 9060 XT LP at 24.99 TFLOPS and the RX 6950 XT at 23.65 TFLOPS. The RX 6950 XT has a distinct FP16 advantage, offering 47.31 TFLOPS (2:1 ratio) compared to the RX 9060 XT LP's 24.99 TFLOPS (1:1 ratio).
Memory architecture also diverges significantly. Both cards have 16 GB of GDDR6 memory, but the RX 6950 XT uses a 256-bit bus width providing 576.0 GB/s of bandwidth, while the RX 9060 XT LP uses a narrower 128-bit bus yielding 322.3 GB/s. The RX 9060 XT LP compensates with faster effective memory speed of 20.1 Gbps versus 18 Gbps for the RX 6950 XT, but the wider bus of the older card still delivers substantially more bandwidth. The RX 9060 XT LP also features a newer PCIe 5.0 x16 interface compared to the RX 6950 XT's PCIe 4.0 x16, and its display outputs include DisplayPort 2.1a versus DisplayPort 1.4a on the RX 6950 XT.
The Verdict
The data presents a clear choice based on performance priorities. The AMD Radeon RX 6950 XT is the dominant performer in the head-to-head benchmarks, winning both tests with margins of 57.2% and 76.1%. Its superior memory bandwidth, higher pixel and texture rates, and substantially more compute units make it the obvious choice for users who prioritize raw performance in OpenCL and Vulkan workloads. The RX 6950 XT also holds the 88th percentile ranking, placing it in the upper echelon of all GPUs.
However, the AMD Radeon RX 9060 XT LP is not without its merits. Its 89th percentile ranking is slightly higher than the RX 6950 XT's 88th, and its average benchmark score of 63,830 exceeds the RX 6950 XT's 58,392. This indicates that across a wider range of tests, the RX 9060 XT LP may actually be the more balanced performer. The RX 9060 XT LP also has a much lower TDP of 140 W versus 335 W for the RX 6950 XT, requires a single 8-pin power connector instead of two, and has a suggested power supply of 300 W versus 700 W. Its dual-slot design is more compact than the RX 6950 XT's triple-slot form factor, and it is an active production product with a newer architecture. For users who need a low-profile, power-efficient card with modern features like DisplayPort 2.1a and PCIe 5.0, the RX 9060 XT LP is the appropriate selection. For those who need maximum compute performance and are willing to accept higher power draw and larger physical size, the RX 6950 XT is the clear winner.
Specification Differences
The two cards differ across nearly every major specification category. The RX 9060 XT LP uses the RDNA 4.0 architecture on a 4 nm process, while the RX 6950 XT uses RDNA 2.0 on a 7 nm process. The RX 9060 XT LP has a die size of 199 mm² and 29,700 million transistors, while the RX 6950 XT has a die size of 520 mm² and 26,800 million transistors. Clock speeds favor the newer card, with the RX 9060 XT LP boosting to 3050 MHz versus 2310 MHz for the RX 6950 XT. Memory bandwidth heavily favors the older card, with 576.0 GB/s versus 322.3 GB/s. Compute resources favor the RX 6950 XT, which has 5120 shading units, 320 TMUs, 128 ROPs, and 80 ray tracing cores, compared to 2048 shading units, 128 TMUs, 64 ROPs, and 32 ray tracing cores for the RX 9060 XT LP.
Power requirements differ substantially: the RX 9060 XT LP has a TDP of 140 W with a single 8-pin connector and a 300 W suggested PSU, while the RX 6950 XT has a TDP of 335 W with dual 8-pin connectors and a 700 W suggested PSU. The RX 9060 XT LP is dual-slot and the RX 6950 XT is triple-slot. The RX 6950 XT has listed dimensions of 267 mm in length, 120 mm in height, and 50 mm in width, while the RX 9060 XT LP has no listed dimensions. The RX 9060 XT LP uses PCIe 5.0 x16 and outputs DisplayPort 2.1a, while the RX 6950 XT uses PCIe 4.0 x16 and outputs DisplayPort 1.4a. The RX 6950 XT has a launch MSRP of 1,099 USD. The RX 9060 XT LP was released in December 2025, while the RX 6950 XT was released in May 2022.
Where Each One Wins
The RX 6950 XT wins decisively in raw compute benchmarks. Its Geekbench OpenCL score of 205,998 and Vulkan score of 165,212 are far superior to the RX 9060 XT LP's corresponding scores of 88,183 and 39,476. The RX 6950 XT also wins on memory bandwidth, offering 576.0 GB/s compared to 322.3 GB/s, and on pixel/texture rates, with 295.7 GPixel/s and 739.2 GTexel/s versus 195.2 GPixel/s and 390.4 GTexel/s. Its larger number of shading units, TMUs, ROPs, and ray tracing cores makes it the better choice for tasks that leverage these resources, such as high-resolution rendering and heavy ray tracing workloads.
The RX 9060 XT LP wins on efficiency and modern features. Its 140 W TDP is less than half of the RX 6950 XT's 335 W, and its 300 W suggested PSU requirement is far more modest than the 700 W needed for the RX 6950 XT. The RX 9060 XT LP also has a higher average benchmark score (63,830 vs 58,392) and a higher percentile ranking (89th vs 88th), suggesting better overall consistency. Its 4 nm process, RDNA 4.0 architecture, PCIe 5.0 interface, and DisplayPort 2.1a outputs make it the more future-proof option. The RX 9060 XT LP's dual-slot form factor and single 8-pin power connector also make it suitable for smaller builds, whereas the RX 6950 XT's triple-slot design and dual connectors require a larger chassis and more robust power delivery.