AMD Radeon R7 M265 vs NVIDIA GeForce GTX 560M Comparison
AMD Radeon R7 M265
GeForce GTX 560M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R7 M265 vs NVIDIA GeForce GTX 560M
The AMD Radeon R7 M265 and NVIDIA GeForce GTX 560M are two end-of-life mobile graphics processors from different eras, and the benchmark data shows they land extremely close in overall performance. In the sole Geekbench OpenCL test, the R7 M265 scores 4929, edging out the GTX 560M’s 4855 by a margin of 1.5%. While the R7 M265 takes the win, the 74-point difference is small enough that in practical use, the two GPUs are effectively interchangeable in raw compute performance, with the data suggesting neither has a meaningful advantage over the other.
Head-to-Head Benchmarks
The only direct comparison available is the Geekbench OpenCL test, where the AMD Radeon R7 M265 posted a score of 4929 against the NVIDIA GeForce GTX 560M’s 4855. This gives the R7 M265 a 1.5% lead, which is a narrow victory. To put that in context, the R7 M265’s nearest rival is the AMD Radeon R7 M360 with an average score of 4931, a delta of 0%, meaning the M265 is essentially tied with its direct successor in this test. The GTX 560M, meanwhile, sits close to the NVIDIA GeForce 940MX, which averages 4844, a 0.2% gap, and the AMD Radeon R6 M255DX at 4867, which is 0.2% ahead of the 560M. Both cards also trail the NVIDIA GeForce RTX 5060 Ti 8 GB, which scores 4901, by less than 1%. The R7 M265 also beats the NVIDIA GeForce GTS 450 (4893) by 0.7%, while the GTX 560M falls 0.8% short of that same desktop card. The overall picture is a tight cluster of GPUs within a 2% performance band, and the R7 M265’s victory is more of a statistical edge than a practical one.
Architecture Differences
The two GPUs come from fundamentally different design philosophies and process generations. The AMD Radeon R7 M265 is built on the GCN 1.0 architecture using a chip codenamed Opal, fabricated on TSMC’s 28 nm process. It packs 950 million transistors into a die size of 77 mm², resulting in a transistor density of 12.3 million per mm². In contrast, the NVIDIA GeForce GTX 560M uses the Fermi 2.0 architecture with the GF116 chip, made on an older 40 nm process from the same foundry. The GTX 560M has 1,170 million transistors spread across a much larger 238 mm² die, yielding a lower density of 4.9 million per mm². That process gap is significant: the R7 M265’s smaller, denser die allows for more modern logic in a smaller footprint, while the GTX 560M’s larger die is a product of its older manufacturing technology. The R7 M265 also supports a newer feature set, including Vulkan 1.2.170, whereas the GTX 560M has no Vulkan support listed. Both support DirectX 12, but the R7 M265 is rated for 12 (11_1) while the GTX 560M is rated for 12 (11_0). OpenGL support is identical at 4.6 for both. The R7 M265 uses a PCIe 3.0 x8 bus interface, while the GTX 560M uses an MXM-B (3.0) interface, which reflects its nature as a module for portable devices.
FAQ
Q: Which GPU has more shading units?
A: The AMD Radeon R7 M265 has 384 shading units, which is double the 192 shading units found on the NVIDIA GeForce GTX 560M. The R7 M265 also has 24 texture mapping units versus 32 on the GTX 560M, and 8 ROPs versus 24 on the NVIDIA part.
Q: How do their memory configurations compare?
A: The R7 M265 comes with 2 GB of DDR3 memory on a 128-bit bus, delivering 28.80 GB/s of bandwidth. The GTX 560M has 1536 MB of GDDR5 memory on a wider 192-bit bus, providing 60.00 GB/s of bandwidth. The GTX 560M’s memory is more than twice as fast in bandwidth, but the R7 M265 has more capacity.
Q: Do both GPUs support DirectX 12?
A: Yes, both support DirectX 12, but with different feature levels. The R7 M265 is rated for DirectX 12 (11_1), while the GTX 560M is rated for DirectX 12 (11_0). The R7 M265 also supports Vulkan 1.2.170, whereas the GTX 560M has no Vulkan support listed.
Q: What is the power consumption of the GTX 560M?
A: The GTX 560M has a TDP of 75 W and uses an MXM Module slot width with no power connectors. The R7 M265 does not have a TDP listed in the data, so no direct power comparison can be made.
Q: Which GPU has a higher pixel and texture fill rate?
A: The R7 M265 has a pixel rate of 6.600 GPixel/s, slightly ahead of the GTX 560M’s 6.200 GPixel/s. However, the GTX 560M has a higher texture rate at 24.80 GTexel/s compared to the R7 M265’s 19.80 GTexel/s.
Q: How do their floating-point performances compare?
A: The R7 M265 delivers 633.6 GFLOPS of FP32 performance, which is higher than the GTX 560M’s 595.2 GFLOPS. This represents a roughly 6% advantage for the AMD part in raw compute throughput.
Specification Differences
The two cards differ across nearly every major specification. The AMD Radeon R7 M265 uses a 28 nm process from TSMC with 950 million transistors on a 77 mm² die, while the NVIDIA GeForce GTX 560M uses a 40 nm process with 1,170 million transistors on a 238 mm² die. The R7 M265 has 384 shading units, 24 TMUs, and 8 ROPs, versus the GTX 560M’s 192 shading units, 32 TMUs, and 24 ROPs. Clock speeds also differ: the R7 M265 runs at a base of 725 MHz with a boost of 825 MHz, while the GTX 560M has no base or boost clock listed, only a memory clock of 625 MHz (2.5 Gbps effective). Memory configurations are notably different: the R7 M265 has 2 GB of DDR3 on a 128-bit bus with 28.80 GB/s bandwidth, while the GTX 560M has 1536 MB of GDDR5 on a 192-bit bus with 60.00 GB/s bandwidth. The R7 M265’s FP32 performance is 633.6 GFLOPS, and its pixel rate is 6.600 GPixel/s with a texture rate of 19.80 GTexel/s. The GTX 560M’s FP32 is 595.2 GFLOPS, with a pixel rate of 6.200 GPixel/s and texture rate of 24.80 GTexel/s. The R7 M265 uses a PCIe 3.0 x8 interface, while the GTX 560M uses MXM-B (3.0) and is described as an MXM Module with no power connectors. The GTX 560M has a TDP of 75 W, while the R7 M265 has no TDP listed. The R7 M265 supports Vulkan 1.2.170; the GTX 560M does not. The R7 M265 was released on 2014-01-08, while the GTX 560M came out on 2011-05-29.
Where Each One Wins
The AMD Radeon R7 M265 wins the only benchmark, taking the Geekbench OpenCL test with a score of 4929 versus 4855. It also wins on raw compute metrics, with higher FP32 performance (633.6 GFLOPS vs 595.2 GFLOPS) and a higher pixel rate (6.600 GPixel/s vs 6.200 GPixel/s). The R7 M265 has double the shading units (384 vs 192), which explains its compute advantage, and it offers more memory capacity at 2 GB versus 1536 MB. The GTX 560M, however, wins on memory bandwidth, delivering 60.00 GB/s versus 28.80 GB/s, thanks to its GDDR5 memory and wider 192-bit bus. It also has a higher texture rate (24.80 GTexel/s vs 19.80 GTexel/s) and more TMUs (32 vs 24) and ROPs (24 vs 8). The GTX 560M is also the only one with a listed TDP (75 W), making it a known power draw, while the R7 M265 has no such specification. In terms of API support, the R7 M265 is ahead with Vulkan support and a higher DirectX feature level.
The Verdict
Based strictly on the data, the AMD Radeon R7 M265 is the better performer in the single available benchmark, taking a 1.5% lead over the NVIDIA GeForce GTX 560M. Its higher shading unit count and newer architecture give it an edge in compute workloads, as reflected in its higher FP32 and pixel rates. However, the GTX 560M is not without merit: its GDDR5 memory and wider bus provide significantly higher bandwidth, which could benefit memory-intensive tasks, and its higher texture rate suggests it may hold its own in texture-heavy scenarios. The R7 M265 is the more future-proof option due to its Vulkan support and newer DirectX feature level, while the GTX 560M has a defined 75 W TDP for builders who need to know exact power requirements. For a buyer choosing between these two end-of-life mobile GPUs, the R7 M265 is the safer pick for general compute and modern API compatibility, while the GTX 560M’s superior memory bandwidth makes it a reasonable choice for bandwidth-bound workloads. The performance gap is small enough that other factors, like driver support or specific laptop integration, would likely decide the matter in practice. The data shows a near-tie, with the AMD card holding a slight edge in overall score and compute capability.