AMD Radeon R5 M430 vs AMD Radeon R7 M265 Comparison
AMD Radeon R5 M430
Radeon R7 M265
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R5 M430 vs AMD Radeon R7 M265
# AMD Radeon R5 M430 vs AMD Radeon R7 M265
Both of these mobile GPUs come from AMD's Gem System generation, share the GCN 1.0 architecture, and are built on the same 28 nm TSMC process. The R5 M430 is a 30th-percentile performer across all GPUs, while the R7 M265 sits just one point behind at the 29th percentile. The data here is surprisingly close, but the differences in memory configuration and raw compute resources tell a more nuanced story.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The AMD Radeon R5 M430 averages 5018 points, while the AMD Radeon R7 M265 averages 4929 points. That gives the R5 M430 a 1.8% lead in overall scoring, though both sit within a hair of each other in the global GPU percentile rankings.
Q: How do these two compare in the OpenCL benchmark?
A: In the geekbench_opencl test, the R5 M430 scores 5152 against the R7 M265's 4929. The R5 M430 wins by 4.5%, which is the only head-to-head benchmark available in the data.
Q: What memory configuration does each GPU use?
A: The R5 M430 has 4 GB of DDR3 on a 64-bit bus, delivering 16.00 GB/s bandwidth. The R7 M265 has 2 GB of DDR3 on a 128-bit bus, delivering 28.80 GB/s. The R7 M265 has 80% more memory bandwidth despite half the capacity.
Q: Which GPU has more shading units?
A: The R7 M265 has 384 shading units, compared to 320 on the R5 M430. That is a 20% increase in raw shader count, yet it does not translate into a benchmark win.
Q: Are these GPUs still in production?
A: Both are marked as end-of-life. The R7 M265 was released on 2014-01-08, and the R5 M430 has no release date listed, but both share the same predecessor (Solar System) and successor (Polaris Mobile).
Q: What is the transistor count difference?
A: The R7 M265 packs 950 million transistors on a 77 mm² die, while the R5 M430 has 690 million on a 56 mm² die. Both have the same transistor density of 12.3M / mm², reflecting the identical 28 nm process node.
Architecture Differences
Both GPUs are built on GCN 1.0 and the 28 nm TSMC node, but they use different chips. The R5 M430 uses the Jet chip, while the R7 M265 uses the Opal chip. This is not just a naming difference — the silicon itself is distinct, with the Opal chip being physically larger and more complex.
The transistor counts reflect that difference. The R7 M265 has 950 million transistors on a 77 mm² die, compared to the R5 M430's 690 million on 56 mm². That is a 37.7% transistor advantage for the R7 M265, and a die that is 37.5% larger. The density stays identical at 12.3M / mm², confirming that both are manufactured on the same process with the same design rules.
The shading resources scale accordingly. The R7 M265 has 384 shading units and 24 texture mapping units, while the R5 M430 has 320 shading units and 20 TMUs. Both have 8 ROPs, so the pixel output capability is nearly identical — the R5 M430 manages 6.840 GPixel/s and the R7 M265 hits 6.600 GPixel/s, a difference of less than 4% in favor of the smaller chip.
The texture rate tells a different story. The R7 M265 achieves 19.80 GTexel/s against the R5 M430's 17.10 GTexel/s. That is a 15.8% advantage for the R7 M265, driven by its extra TMUs. The FP32 compute also favors the R7 M265 at 633.6 GFLOPS versus 547.2 GFLOPS, a 15.8% lead that mirrors the texture rate difference.
Memory architecture is where the two diverge most sharply. The R5 M430 uses a 64-bit bus with 4 GB of DDR3, while the R7 M265 uses a 128-bit bus with 2 GB of DDR3. The R7 M265's bandwidth of 28.80 GB/s is 80% higher than the R5 M430's 16.00 GB/s. The R5 M430 compensates with double the capacity, which could matter for texture-heavy workloads that need more resident data.
Both GPUs share the same API support: DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. They also both use a PCIe 3.0 x8 bus interface. The R5 M430 is marked as an IGP (integrated graphics processor) with portable-device-dependent display outputs, while the R7 M265 has no slot width or display output information listed.
Head-to-Head Benchmarks
The only direct benchmark comparison in the data is the geekbench_opencl test. The R5 M430 scores 5152, and the R7 M265 scores 4929. That gives the R5 M430 a 4.5% win. This is a notable result because the R7 M265 has more shading units, more TMUs, higher FP32 throughput, and 80% more memory bandwidth — yet it loses the actual test.
What could explain this? The R5 M430 has higher clocks. Its base clock is 780 MHz with a boost of 855 MHz, while the R7 M265 runs at 725 MHz base and 825 MHz boost. That is a 7.1% base clock advantage and a 3.6% boost clock advantage for the R5 M430. The memory clock also favors the R5 M430 at 1000 MHz (2 Gbps effective) versus 900 MHz (1800 Mbps effective) on the R7 M265.
The R5 M430 also has double the memory capacity. For OpenCL workloads that involve large datasets or frequent memory allocation, the extra 2 GB could reduce swapping or re-computation overhead. The 4.5% win might be the result of these factors working together, despite the R7 M265's theoretical compute advantage.
It is notably the R7 M265 has only one benchmark result in the data (4929 from geekbench_opencl), while the R5 M430 has two (5152 OpenCL, 4884 Vulkan). The average benchmark score of 5018 for the R5 M430 reflects both tests, while the R7 M265's average of 4929 is just its single OpenCL result. The Vulkan score of 4884 for the R5 M430 is actually below the R7 M265's OpenCL score, suggesting the gap may shrink or reverse in Vulkan workloads.
Specification Differences
The two GPUs differ across nearly every major specification category. Here is the breakdown:
- Chip: R5 M430 uses Jet; R7 M265 uses Opal
- Generation: R5 M430 is in the R5 M400 line; R7 M265 is in the R7 M200 line
- Transistors: 690 million (R5 M430) vs 950 million (R7 M265)
- Die size: 56 mm² (R5 M430) vs 77 mm² (R7 M265)
- Base clock: 780 MHz (R5 M430) vs 725 MHz (R7 M265)
- Boost clock: 855 MHz (R5 M430) vs 825 MHz (R7 M265)
- Memory clock: 1000 MHz / 2 Gbps effective (R5 M430) vs 900 MHz / 1800 Mbps effective (R7 M265)
- Memory size: 4 GB (R5 M430) vs 2 GB (R7 M265)
- Memory bus width: 64-bit (R5 M430) vs 128-bit (R7 M265)
- Memory bandwidth: 16.00 GB/s (R5 M430) vs 28.80 GB/s (R7 M265)
- Shading units: 320 (R5 M430) vs 384 (R7 M265)
- TMUs: 20 (R5 M430) vs 24 (R7 M265)
- Pixel rate: 6.840 GPixel/s (R5 M430) vs 6.600 GPixel/s (R7 M265)
- Texture rate: 17.10 GTexel/s (R5 M430) vs 19.80 GTexel/s (R7 M265)
- FP32: 547.2 GFLOPS (R5 M430) vs 633.6 GFLOPS (R7 M265)
- Slot width: IGP (R5 M430) vs not listed (R7 M265)
- Release date: not listed (R5 M430) vs 2014-01-08 (R7 M265)
The ROP count (8), process node (28 nm), foundry (TSMC), transistor density (12.3M / mm²), bus interface (PCIe 3.0 x8), APIs, production status (end-of-life), predecessor (Solar System), and successor (Polaris Mobile) are identical.
Where Each One Wins
The R5 M430 wins the only head-to-head benchmark, scoring 4.5% higher in geekbench_opencl. It also has higher base and boost clocks, a faster memory clock, and double the memory capacity at 4 GB. Its pixel rate is 3.6% higher than the R7 M265's, which could translate to a slight edge in fill-rate-bound scenarios.
The R7 M265 wins in raw compute throughput. Its 633.6 GFLOPS FP32 is 15.8% higher than the R5 M430's 547.2 GFLOPS. Its texture rate of 19.80 GTexel/s is also 15.8% higher. The 128-bit memory bus gives it 28.80 GB/s of bandwidth, which is 80% higher than the R5 M430's 16.00 GB/s. For workloads that are bandwidth-limited or texture-heavy, the R7 M265 has the theoretical edge.
The benchmark data, however, suggests that the R5 M430's advantages in clock speed and memory capacity outweigh the R7 M265's raw compute superiority in at least one practical test. The R5 M430's nearest rivals include the AMD Radeon R7 M340 (scoring 5063, 0.9% higher) and the AMD FirePro W4170M (5034, 0.3% higher), placing it in a tight cluster. The R7 M265's nearest rivals include the AMD Radeon R7 M360 (4931, 0% delta) and the AMD FirePro W5130M (4904, 0.5% lower), showing it sits at the bottom of a similar cluster.
The Verdict
The data presents a clear split between theoretical capability and measured performance. The R7 M265 has the superior hardware on paper — more transistors, more shading units, more TMUs, higher FP32, and dramatically higher memory bandwidth. But the R5 M430 wins the actual OpenCL benchmark by 4.5%, likely due to its higher clocks and double the memory capacity.
For users who prioritize the single measured data point, the R5 M430 is the better choice. Its 5152 OpenCL score beats the R7 M265's 4929, and its 30th-percentile ranking is one point higher than the R7 M265's 29th percentile. The higher base clock (780 vs 725 MHz) and boost clock (855 vs 825 MHz) are also in its favor.
For users who believe the R7 M265's architectural advantages would win out in workloads not captured by the single benchmark, the 15.8% FP32 and texture rate leads, plus the 80% bandwidth advantage, are compelling. The 128-bit memory bus is a significant architectural upgrade over the 64-bit bus, and the extra 190 million transistors suggest a more capable chip overall.
The verdict depends on which data you trust. The measured benchmark says the R5 M430 is faster. The specification sheet says the R7 M265 should be faster. In the absence of more head-to-head tests — there is no Vulkan benchmark for the R7 M265, and no additional OpenCL runs — the single 4.5% win for the R5 M430 stands as the only direct comparison. That makes the R5 M430 the safer recommendation based on evidence, while the R7 M265 remains the more interesting hardware for those who read specs and wonder what might have been.