AMD Radeon R5 M320 vs AMD Radeon R7 M265 Comparison
AMD Radeon R5 M320
Radeon R7 M265
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R5 M320 vs AMD Radeon R7 M265
# AMD Radeon R7 M265 vs AMD Radeon R5 M320
The AMD Radeon R7 M265 and AMD Radeon R5 M320 are both end-of-life mobile graphics solutions built on GCN 1.0 architecture, yet they take fundamentally different approaches to achieving similar performance goals. The data shows the R5 M320 edges out the R7 M265 in the only shared benchmark, but the R7 M265 counters with a superior feature set and higher transistor density. This comparison reveals that raw benchmark scores do not tell the complete story—memory configuration, bus width, and architectural efficiency all factor into which GPU suits a particular workload.
Where Each One Wins
The AMD Radeon R5 M320 claims victory in the sole head-to-head benchmark available. In Geekbench OpenCL, the R5 M320 scores 5051 against the R7 M265's 4929, a delta of -2.4% from the R7 M265's perspective. This means the R5 M320 is approximately 2.5% faster in compute workloads that leverage OpenCL acceleration. The R5 M320 also demonstrates versatility with a Geekbench Vulkan score of 4262, a metric the R7 M265 lacks entirely, suggesting the R5 M320 is better equipped for modern graphics APIs.
The R7 M265, however, wins on architectural sophistication. It packs 384 shading units, 24 texture mapping units, and 8 ROPs, compared to the R5 M320's 320 shading units and 20 TMUs—both retain 8 ROPs. This translates to higher texture fill rate (19.80 GTexel/s vs 17.10 GTexel/s) and higher FP32 throughput (633.6 GFLOPS vs 547.2 GFLOPS). The R7 M265 also delivers significantly more memory bandwidth at 28.80 GB/s versus the R5 M320's 16.00 GB/s, a 44% advantage. For workloads that are bandwidth-sensitive—such as texture-heavy gaming or large data transfers—the R7 M265's wider 128-bit memory bus versus the R5 M320's 64-bit bus provides a clear structural edge, even if the benchmark data does not isolate this advantage.
The R5 M320 counters with higher clock speeds. Its base clock runs at 780 MHz and boosts to 855 MHz, while the R7 M265 operates at 725 MHz base and 825 MHz boost. The R5 M320 also offers twice the memory capacity at 4 GB versus 2 GB, which matters for applications that require large framebuffers or datasets exceeding 2 GB. In typical laptop scenarios, the R5 M320's higher clocks and doubled VRAM make it the better choice for multitasking and modern game textures, while the R7 M265's superior raw compute and bandwidth favor compute-heavy tasks like video encoding or GPU-accelerated physics.
Architecture Differences
Both GPUs share the same GCN 1.0 architecture, manufactured on TSMC's 28 nm process node, and both use the same foundry. The transistor density is identical at 12.3M transistors per mm², but the physical implementations diverge substantially. The R7 M265 uses the Opal chip, which packs 950 million transistors into a 77 mm² die. The R5 M320 employs the smaller Jet chip, housing 690 million transistors on a 56 mm² die. This means the R7 M265 dedicates roughly 27% more silicon area and 27% more transistors to its compute units, explaining its higher shading unit count and texture throughput.
The memory subsystems are starkly different. The R7 M265 pairs 2 GB of DDR3 memory with a 128-bit bus, achieving 28.80 GB/s bandwidth. The R5 M320 also uses DDR3 but halves the bus to 64-bit, resulting in 16.00 GB/s bandwidth—a 44% reduction—while doubling capacity to 4 GB. The R5 M320's memory clock runs at 1000 MHz (2 Gbps effective), compared to the R7 M265's 900 MHz (1800 Mbps effective). Clock speed partially compensates for the narrower bus, but not enough to close the bandwidth gap. Both GPUs support DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170, so API compatibility is identical.
The R5 M320 is classified as an IGP (integrated graphics processor) with "Portable Device Dependent" display outputs, indicating it is designed for thinner laptops where dedicated graphics memory is less critical. The R7 M265 lacks this classification, suggesting it may be a discrete solution. The R5 M320's slot width is listed as "IGP," reinforcing its integrated nature. Both share the PCIe 3.0 x8 bus interface, so interconnect bandwidth is equal. The R5 M320 released later, on 2014-05-04, while the R7 M265 launched on 2014-01-08, giving the R5 M320 a later production window. Both share the same predecessor (Solar System) and successor (Polaris Mobile), placing them in adjacent product generations.
FAQ
Q: Which GPU has better compute performance in OpenCL?
A: The AMD Radeon R5 M320 scores 5051 in Geekbench OpenCL, which is 2.4% higher than the R7 M265's 4929. Despite having fewer shading units (320 vs 384), the R5 M320's higher clock speeds (855 MHz boost vs 825 MHz) help it edge ahead in this synthetic compute test.
Q: Does the R7 M265 have any advantages in memory bandwidth?
A: Yes, significantly. The R7 M265 features a 128-bit memory bus with 28.80 GB/s bandwidth, while the R5 M320 uses a 64-bit bus with only 16.00 GB/s. This gives the R7 M265 a 44% bandwidth advantage, which is critical for texture-heavy workloads even though the R5 M320 has higher memory clocks.
Q: Can the R5 M320 handle larger datasets or textures?
A: The R5 M320 ships with 4 GB of DDR3 memory, double the R7 M265's 2 GB. For applications that require framebuffers or working sets exceeding 2 GB, the R5 M320 is the only viable option between the two, though the R7 M265's higher bandwidth may still process smaller datasets faster.
Q: Are these GPUs comparable in terms of modern API support?
A: Both support DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. The R5 M320 additionally shows a Geekbench Vulkan score of 4262, while no Vulkan benchmark is recorded for the R7 M265, suggesting the R5 M320 has been validated for Vulkan workloads.
Q: Which GPU is more power-efficient based on the data?
A: The fact pack does not list TDP values for either GPU, so no direct power comparison can be made. However, the R5 M320's smaller die (56 mm² vs 77 mm²) and fewer transistors (690 million vs 950 million) suggest it likely draws less power, though this is inference from physical characteristics, not measured data.
Q: How do these GPUs rank against all other GPUs?
A: The R7 M265 sits in the 29th percentile of all GPUs, while the R5 M320 sits in the 27th percentile. The R5 M320's average benchmark score is 4657, slightly lower than its OpenCL score due to the Vulkan result pulling the average down, whereas the R7 M265's average equals its single OpenCL score of 4929.
Specification Differences
The two GPUs diverge across nearly every major specification. The R7 M265 uses the Opal chip with 950 million transistors on a 77 mm² die, while the R5 M320 uses the Jet chip with 690 million transistors on a 56 mm² die. The R7 M265 has more shading units (384 vs 320), more TMUs (24 vs 20), and identical ROPs (8 vs 8). Clock speeds favor the R5 M320: 780 MHz base and 855 MHz boost versus the R7 M265's 725 MHz base and 825 MHz boost. Memory configuration is the most dramatic difference: the R7 M265 offers 2 GB on a 128-bit bus with 28.80 GB/s bandwidth, while the R5 M320 offers 4 GB on a 64-bit bus with 16.00 GB/s bandwidth. The R5 M320's memory clock is 1000 MHz (2 Gbps effective) versus the R7 M265's 900 MHz (1800 Mbps effective). Pixel rates are close—6.600 GPixel/s for the R7 M265 and 6.840 GPixel/s for the R5 M320—but texture rates favor the R7 M265 at 19.80 GTexel/s versus 17.10 GTexel/s. FP32 throughput is 633.6 GFLOPS for the R7 M265 and 547.2 GFLOPS for the R5 M320. The R5 M320 is classified as an IGP with portable-device-dependent outputs, while the R7 M265 has no such classification. Their release dates differ: the R7 M265 launched on 2014-01-08 and the R5 M320 on 2015-05-04. Both share the same bus interface (PCIe 3.0 x8), API support, process node, foundry, and transistor density. Neither lists a TDP, power connector, or suggested PSU.
Head-to-Head Benchmarks
The only direct benchmark comparison is Geekbench OpenCL, where the R5 M320 wins with a score of 5051 against the R7 M265's 4929. This 2.4% delta is modest but consistent, and it is notable because the R7 M265 has 20% more shading units and 80% more memory bandwidth. The R5 M320 compensates through higher clocks—855 MHz boost versus 825 MHz—and its larger 4 GB memory pool, though neither fully explains the performance inversion. The R7 M265's theoretical FP32 throughput is 633.6 GFLOPS, which is 15.8% higher than the R5 M320's 547.2 GFLOPS, yet the benchmark does not reflect this. This suggests the OpenCL workload may be memory-latency-bound or clock-bound rather than compute-bound, favoring the R5 M320's faster memory clock and higher core clocks. The R7 M265's texture rate is 19.80 GTexel/s versus the R5 M320's 17.10 GTexel/s, a 15.8% advantage that also fails to translate into a benchmark win.
The R5 M320's additional Vulkan score of 4262 provides a second data point, but no comparable Vulkan score exists for the R7 M265, so a direct comparison is impossible. However, the R5 M320's Vulkan result is 15.6% lower than its OpenCL score, indicating that the GPU performs better under OpenCL than Vulkan. The R7 M265's nearest rivals cluster tightly around its score: the R7 M360 scores 4931 (0% delta), the FirePro W5130M scores 4904 (0.5% delta), the GeForce RTX 5060 Ti 8 GB scores 4901 (0.6% delta), and the GeForce GTS 450 scores 4893 (0.7% delta). The R5 M320's rivals also cluster: the RX 9060 XT 16 GB scores 4657 (0% delta), the Quadro P400 scores 4684 (-0.6% delta), the GTX 970M scores 4628 (0.6% delta), and the Quadro M3000M scores 4621 (0.8% delta). Notably, the R5 M320's average score of 4657 is lower than its OpenCL score of 5051, dragging its percentile down to 27th versus the R7 M265's 29th percentile.
The Verdict
The data presents a nuanced picture. The R5 M320 wins the only head-to-head benchmark and offers double the VRAM, making it the pragmatic choice for users who prioritize measured compute performance and need large memory capacity for modern applications. Its higher clocks and later release date suggest better optimization for contemporary workloads. However, the R7 M265 is the superior engineering effort: it delivers 44% more memory bandwidth, 15.8% more FP32 throughput, and 15.8% more texture fill rate, all while maintaining the same API support and process node. For workloads that stress memory bandwidth—such as high-resolution texture streaming or compute kernels with large data arrays—the R7 M265's 128-bit bus is a decisive structural advantage that benchmarks may understate. The R7 M265's higher percentile ranking (29th vs 27th) confirms it is the better overall GPU across all recorded tests, despite losing the single OpenCL comparison. Users should choose the R5 M320 if they need 4 GB of VRAM and value the empirical OpenCL win; they should choose the R7 M265 if they prioritize bandwidth, texture throughput, and theoretical compute headroom. Both are end-of-life products, but the R7 M265's architectural advantages make it the more future-proof choice for bandwidth-bound tasks, while the R5 M320 suits capacity-hungry, clock-sensitive workloads.