AMD Radeon R5 Graphics vs NVIDIA GeForce GTX 1050 Ti Comparison
AMD Radeon R5 Graphics
GeForce GTX 1050 Ti
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R5 Graphics vs NVIDIA GeForce GTX 1050 Ti
The NVIDIA GeForce GTX 1050 Ti and AMD Radeon R5 Graphics occupy entirely different tiers of the GPU market, as evidenced by their benchmark scores and architectural designs. The GTX 1050 Ti is a dedicated, end-of-life discrete graphics card from the GeForce 10-series, built on the Pascal architecture with a 14 nm process node. In contrast, the Radeon R5 Graphics is an integrated graphics processor (IGP) from the GCN 2.0 generation, specifically designed for the Kaveri APU lineup, manufactured on a 28 nm node. The data shows a decisive performance gap, with the GTX 1050 Ti leading by hundreds of percentage points in every shared benchmark, but the R5's role as a low-power IGP with a 15 W TDP makes it a fundamentally different product category.
FAQ
Q: How does the NVIDIA GeForce GTX 1050 Ti compare to the AMD Radeon R5 Graphics in average benchmark scores?
A: The GTX 1050 Ti has an average benchmark score of 4193, while the Radeon R5 Graphics scores 3883. This places the GTX 1050 Ti approximately 8% higher overall, though the comparison is limited because the two products share only two benchmark tests.
Q: What is the performance difference in the Geekbench OpenCL test?
A: The GTX 1050 Ti scores 18129, while the Radeon R5 Graphics scores 5183. This results in a 249.8% lead for NVIDIA in the Geekbench OpenCL benchmark, demonstrating a massive advantage in general-purpose compute performance.
Q: Which GPU shows a larger margin in the Geekbench Vulkan test?
A: The GTX 1050 Ti again wins decisively, scoring 10001 versus the R5's 2582. This represents a 287.3% delta, making the Vulkan test the largest relative win for NVIDIA among the shared benchmarks.
Q: What are the memory configurations of these two GPUs?
A: The GTX 1050 Ti features 4 GB of dedicated GDDR5 memory on a 128-bit bus with 112.1 GB/s bandwidth. The Radeon R5 Graphics uses System Shared memory, with its bus width and bandwidth listed as System Dependent.
Q: How do their shading unit counts differ?
A: The GTX 1050 Ti has 768 shading units, 48 texture mapping units (TMUs), and 32 raster output units (ROPs). The Radeon R5 Graphics has 256 shading units, 16 TMUs, and only 4 ROPs, reflecting its much smaller integrated design.
Q: What is the process node and power requirement difference?
A: The GTX 1050 Ti is built on a 14 nm process by Samsung and has a 75 W TDP, while the Radeon R5 Graphics uses a 28 nm process from GlobalFoundries with a 15 W TDP. The GTX 1050 Ti also lists a suggested PSU of 250 W, whereas the R5 has no such requirement as an IGP.
The Verdict
The benchmark data leaves no ambiguity: the NVIDIA GeForce GTX 1050 Ti is the overwhelmingly superior performer, winning both head-to-head benchmark tests with deltas exceeding 249%. Users seeking any kind of playable gaming or compute workload should choose the GTX 1050 Ti, which sits at the 25th percentile of all GPUs and outpaces its nearest rival, the AMD Radeon R5 M330, by 0.6%. The Radeon R5 Graphics, at the 23rd percentile, is only competitive with much older discrete cards like the NVIDIA Quadro 2000, which it trails by 0.4%.
However, the R5 Graphics is not without a purpose. Its 15 W TDP and integrated nature make it suitable for low-power systems where a dedicated card is impractical, and its 3883 average score is only 7.4% below the GTX 1050 Ti's 4193 in aggregate terms. That said, the aggregate comparison is misleading because the shared benchmarks show a 2.5x to 3x gap; the R5's average is buoyed by a lack of demanding tests in its dataset. For any user who prioritizes raw performance, the GTX 1050 Ti is the only rational choice. For users who require minimal power draw and space, the R5 Graphics offers a baseline level of functionality, but the data shows it cannot handle the same workloads.
Head-to-Head Benchmarks
The Geekbench OpenCL test provides the first clear data point. The GTX 1050 Ti scores 18129, while the Radeon R5 Graphics manages only 5183. This 249.8% delta is substantial, indicating that the dedicated Pascal GPU delivers roughly 3.5 times the compute throughput of the GCN 2.0 IGP. In practical terms, this translates to faster physics simulations, video encoding, and other OpenCL-accelerated tasks.
The Geekbench Vulkan test shows an even wider gap. The GTX 1050 Ti achieves 10001 points, compared to the R5's 2582 points, yielding a 287.3% advantage for NVIDIA. Vulkan is a low-overhead graphics API, and the result suggests that the GTX 1050 Ti's 768 shading units and dedicated memory provide a massive edge in modern game rendering compared to the R5's 256 shading units and shared system memory. Notably, the GTX 1050 Ti's Vulkan score is nearly four times higher than the R5's, while its OpenCL lead is closer to 3.5 times, indicating the gap widens slightly under graphics-centric workloads.
Across both tests, the GTX 1050 Ti wins 2 out of 2 head-to-head matchups, with no wins for the Radeon R5 Graphics. The largest single margin is the 287.3% in Vulkan, which underscores the architectural gulf between a discrete 14 nm part with 3,300 million transistors and an integrated 28 nm part with 2,410 million transistors. The R5's nearest rival, the NVIDIA Quadro 2000, scores 3898, which is only 0.4% higher, placing the R5 in a performance tier that the GTX 1050 Ti surpasses by a wide margin.
Specification Differences
The most fundamental difference is memory. The GTX 1050 Ti has 4 GB of dedicated GDDR5 memory with a 128-bit bus and 112.1 GB/s bandwidth. The Radeon R5 Graphics relies entirely on System Shared memory, with bandwidth listed as System Dependent, meaning its performance scales with the host system's RAM speed and architecture. This alone explains much of the benchmark gap, as dedicated memory provides consistent, high-speed access that shared memory cannot match.
Clock speeds also differ sharply. The GTX 1050 Ti has a base clock of 1291 MHz and a boost clock of 1392 MHz, with memory running at 1752 MHz (7 Gbps effective). The Radeon R5 Graphics lists no base or boost clocks, only stating that its memory is System Shared, which implies it operates at the system memory's frequency. The compute rates reflect this: the GTX 1050 Ti delivers 2.138 TFLOPS of FP32 performance and 66.82 GTexel/s texture rate, while the R5 manages only 388.1 GFLOPS and 12.13 GTexel/s.
The physical specifications are equally divergent. The GTX 1050 Ti is a dual-slot card measuring 145 mm in length and 111 mm in height, with no power connectors required and a 75 W TDP. It uses a PCIe 3.0 x16 bus interface and offers display outputs of 1x DVI, 1x HDMI 2.0, and 1x DisplayPort 1.4a. The Radeon R5 Graphics is an IGP with a 15 W TDP, no slot width, no power connectors, and a bus interface of simply "IGP," with display outputs dependent on the motherboard. The GTX 1050 Ti also has a launch MSRP of 139 USD, while the R5 has no listed launch MSRP.
Architecture Differences
The architectural divide is stark. The GTX 1050 Ti is built on NVIDIA's Pascal architecture using the GP107 chip, manufactured on Samsung's 14 nm process. It contains 3,300 million transistors on a 132 mm² die, yielding a transistor density of 25.0M per mm². The Radeon R5 Graphics uses AMD's GCN 2.0 architecture with the Spectre SL chip, fabricated on GlobalFoundries' 28 nm process. It has 2,410 million transistors on a much larger 245 mm² die, resulting in a lower density of 9.8M per mm².
These process and density differences explain the performance gap. The GTX 1050 Ti's 14 nm node allows for significantly higher clock speeds and efficiency, while its larger transistor count is dedicated to more compute units. The R5's 28 nm node is older and less efficient, and its 2,410 million transistors are shared with the CPU components of the Kaveri APU, not exclusively dedicated to graphics. The R5's 4 ROPs and 16 TMUs are drastically lower than the GTX 1050 Ti's 32 ROPs and 48 TMUs, limiting its pixel and texture fill rates.
API support also differs. Both support DirectX 12 and OpenGL 4.6, but the GTX 1050 Ti supports DirectX 12 (12_1) and Vulkan 1.4, while the R5 is limited to DirectX 12 (12_0) and Vulkan 1.2.170. The GTX 1050 Ti also supports FP16 at 33.41 GFLOPS (1:64), whereas the R5 lists no FP16 capability. The GTX 1050 Ti's successor is the GeForce 20 series, and its predecessor is the GeForce 900 series, while the R5's successor is GCN 3.0 IGP, with a predecessor of TeraScale 3 IGP. The release dates reflect this gap: the GTX 1050 Ti launched in October 2016, while the R5 came out in September 2014.