AMD Radeon Pro Vega 56 vs AMD Radeon RX 5600 OEM Comparison

AMD
RADEON

AMD Radeon Pro Vega 56

CORE STATE Vega 10
VRAM 8 GB
CLOCK SPEED 1250 MHz
TDP 210 W
BUS WIDTH 2048 bit
ARCHITECTURE GCN 5.0
nm
PROCESS 14 nm
LAUNCH DATE 2017
VS
AMD
RADEON

Radeon RX 5600 OEM

CORE STATE Navi 10
VRAM 6 GB
CLOCK SPEED 1560 MHz
TDP 125 W
BUS WIDTH 192 bit
ARCHITECTURE RDNA 1.0
nm
PROCESS 7 nm
LAUNCH DATE 2020

PERFORMANCE BENCHMARKS

geekbench_metal
63,145
N/A
geekbench_opencl
61,930
62,427
geekbench_vulkan
66,004
53,743

Analysis: AMD Radeon Pro Vega 56 vs AMD Radeon RX 5600 OEM

The benchmark data presents a clear split: the AMD Radeon Pro Vega 56 wins decisively in Vulkan performance, while the AMD Radeon RX 5600 OEM edges ahead in OpenCL. The Pro Vega 56’s average benchmark score of 63693 places it in the 89th percentile of all GPUs, whereas the RX 5600 OEM’s 58085 average sits in the 87th percentile. This 9.6% gap in average scores, combined with the Pro Vega 56’s narrower margin to its nearest rivals, establishes it as the stronger overall performer in this comparison.

Head-to-Head Benchmarks

The most significant divergence is in the Geekbench Vulkan test. The Pro Vega 56 scores 66004, while the RX 5600 OEM manages 53743. That is a 22.8% advantage for the Pro Vega 56, and it is the single largest delta between the two cards across any metric. In practical terms, this suggests a substantial lead in compute workloads that leverage the Vulkan API, which is notable given that both cards are AMD architectures but from different generations.

The OpenCL results tell a different story, though the margin is much smaller. The RX 5600 OEM scores 62427 against the Pro Vega 56’s 61930, giving the OEM card a 0.8% edge. This is a narrow win — within the noise of most real-world workloads — but it does indicate that the newer RDNA 1.0 architecture is not universally slower in raw compute; it holds its own in OpenCL-specific tasks.

Looking at the nearest rivals for context, the Pro Vega 56’s 63693 average is nearly identical to the AMD Radeon RX 7600M (63775, -0.1%), the AMD Radeon RX 9060 XT LP (63830, -0.2%), and the NVIDIA CMP 30HX (63842, -0.2%). It trails the AMD Radeon Pro WX 9100 by just 0.8%. This clustering means the Pro Vega 56 is performing right at the expected level for its class. In contrast, the RX 5600 OEM’s 58085 average is 0.3% behind the Intel Arc A570M (58239), 0.5% behind the AMD Radeon RX 6950 XT (58392), and 0.8% behind the NVIDIA P102-100 (58528). It does edge out the Intel Arc A580 (57756) by 0.6%. The RX 5600 OEM’s rivals are generally lower-scoring, reinforcing that it is a tier below the Pro Vega 56 in aggregate.

The data also shows a notable difference in the number of benchmark results. The Pro Vega 56 has three recorded scores (Metal, OpenCL, Vulkan), while the RX 5600 OEM only has two (OpenCL, Vulkan). This means the Pro Vega 56’s average includes a Metal score of 63145, which is not available for the RX 5600 OEM. For users targeting Apple’s Metal API, that is an additional data point in favor of the Pro Vega 56, though it cannot be directly compared here.

The Verdict

The AMD Radeon Pro Vega 56 is the superior card for compute-heavy workloads, particularly those using the Vulkan API. Its 22.8% Vulkan lead is overwhelming, and its higher average benchmark score (63693 vs 58085) confirms that it is the stronger all-round performer despite being older. The data shows that the Pro Vega 56 sits in the 89th percentile, nine points above the RX 5600 OEM’s 87th, which is a meaningful separation.

However, the RX 5600 OEM is not without merit. It wins in OpenCL by 0.8%, and it does so while consuming significantly less power — 125 W versus 210 W. It also uses a smaller die (251 mm² vs 495 mm²) and a more advanced 7 nm process, which explains its efficiency advantage. For users whose workloads are exclusively OpenCL-based and who prioritize lower power draw, the RX 5600 OEM is the rational pick.

For everyone else, the Pro Vega 56’s Vulkan dominance and higher average score make it the recommended choice. The Pro Vega 56 also offers 8 GB of HBM2 memory with 402.4 GB/s bandwidth, versus 6 GB of GDDR6 at 288.0 GB/s. The memory bandwidth difference — 40% higher on the Pro Vega 56 — is a likely contributor to its Vulkan advantage. The verdict is clear: the Pro Vega 56 wins on performance, while the RX 5600 OEM wins on efficiency.

FAQ

Q: Which card has the higher average benchmark score?

A: The AMD Radeon Pro Vega 56 has an average benchmark score of 63693, which is 9.6% higher than the AMD Radeon RX 5600 OEM’s 58085.

Q: How large is the Vulkan performance gap?

A: The Pro Vega 56 scores 66004 in Geekbench Vulkan, which is 22.8% higher than the RX 5600 OEM’s 53743.

Q: Does the RX 5600 OEM win any benchmark?

A: Yes, it wins the Geekbench OpenCL test with a score of 62427, which is 0.8% higher than the Pro Vega 56’s 61930.

Q: What is the memory configuration difference?

A: The Pro Vega 56 has 8 GB of HBM2 memory on a 2048-bit bus with 402.4 GB/s bandwidth. The RX 5600 OEM has 6 GB of GDDR6 on a 192-bit bus with 288.0 GB/s bandwidth.

Q: Which card is more power-efficient?

A: The RX 5600 OEM has a 125 W TDP, which is 85 W lower than the Pro Vega 56’s 210 W. It also uses a 7 nm process versus 14 nm.

Q: How do the cards compare in transistor density?

A: The RX 5600 OEM has a transistor density of 41.0M / mm², far higher than the Pro Vega 56’s 25.3M / mm², due to the smaller 7 nm node.

Specification Differences

The two cards diverge sharply on process node and manufacturing. The Pro Vega 56 uses a 14 nm process at GlobalFoundries, with a die size of 495 mm² and 12,500 million transistors. The RX 5600 OEM uses a 7 nm process at TSMC, with a die size of 251 mm² and 10,300 million transistors. This yields a transistor density of 25.3M / mm² for the Pro Vega 56 versus 41.0M / mm² for the RX 5600 OEM.

Clock speeds differ significantly. The Pro Vega 56 has a base clock of 1138 MHz and a boost clock of 1250 MHz. The RX 5600 OEM has a lower base clock of 1130 MHz but a much higher boost clock of 1560 MHz, with a game clock of 1375 MHz. Memory clocks also differ: the Pro Vega 56 runs at 786 MHz (1572 Mbps effective), while the RX 5600 OEM runs at 1500 MHz (12 Gbps effective).

The compute units are not directly comparable in count, but the shading units tell the story: the Pro Vega 56 has 3584 shading units, 224 TMUs, and 64 ROPs. The RX 5600 OEM has 2048 shading units, 128 TMUs, and 64 ROPs. The Pro Vega 56’s pixel rate is 80.00 GPixel/s, while the RX 5600 OEM’s is higher at 99.84 GPixel/s. Texture rates are 280.0 GTexel/s for the Pro Vega 56 versus 199.7 GTexel/s for the RX 5600 OEM.

Power and physical requirements also differ. The Pro Vega 56 has a 210 W TDP and is listed as an IGP (integrated graphics processor) with no power connectors. The RX 5600 OEM has a 125 W TDP, is a dual-slot card, requires a single 8-pin power connector, and has a suggested PSU of 300 W. The bus interface differs as well: PCIe 3.0 x16 for the Pro Vega 56 versus PCIe 4.0 x16 for the RX 5600 OEM. Both have identical display outputs: 1x HDMI 2.0b and 3x DisplayPort 1.4a.

Architecture Differences

The architectural split is fundamental. The Pro Vega 56 is built on GCN 5.0, the final iteration of AMD’s Graphics Core Next architecture, and belongs to the Radeon Pro Mac (Vega Series) generation. The RX 5600 OEM is built on RDNA 1.0, the first generation of AMD’s Radeon DNA architecture, and belongs to the Navi (RX 5000) generation. This is a generational leap from GCN to RDNA, which explains the efficiency improvements in the RX 5600 OEM.

The chip designs differ: the Pro Vega 56 uses the Vega 10 chip, while the RX 5600 OEM uses the Navi 10 chip. The Pro Vega 56 has more shading units (3584 vs 2048) and TMUs (224 vs 128), but both have 64 ROPs. The Pro Vega 56 also has a wider memory bus (2048-bit vs 192-bit) and uses HBM2 memory, whereas the RX 5600 OEM uses GDDR6. The Pro Vega 56’s FP32 throughput is 8.960 TFLOPS, higher than the RX 5600 OEM’s 6.390 TFLOPS. FP16 rates are 17.92 TFLOPS (2:1) for the Pro Vega 56 and 12.78 TFLOPS (2:1) for the RX 5600 OEM.

API support shows a minor difference: both support DirectX 12 (12_1) and OpenGL 4.6, but the RX 5600 OEM supports Vulkan 1.4, while the Pro Vega 56 supports Vulkan 1.3. Neither card has ray tracing or tensor cores. The RX 5600 OEM’s predecessor is listed as “Vega” and its successor as “Navi II,” indicating its place in the product line, while the Pro Vega 56 has no listed predecessor or successor. The release dates also differ: the Pro Vega 56 launched in August 2017, and the RX 5600 OEM in January 2020.

Where Each One Wins

The Pro Vega 56 wins in raw compute throughput. Its FP32 performance of 8.960 TFLOPS is 40% higher than the RX 5600 OEM’s 6.390 TFLOPS, and its FP16 rate of 17.92 TFLOPS is similarly ahead of 12.78 TFLOPS. This, combined with the 22.8% Vulkan benchmark lead, makes it the clear choice for compute-heavy applications such as rendering, simulation, and any workload that can utilize Vulkan’s compute capabilities. The 8 GB HBM2 memory with 402.4 GB/s bandwidth also gives it a massive memory bandwidth advantage, which is critical for large datasets or high-resolution textures. Its 89th percentile standing versus the RX 5600 OEM’s 87th further confirms its higher overall performance tier.

The RX 5600 OEM wins in efficiency and specific API scenarios. Its 125 W TDP is 60% lower than the Pro Vega 56’s 210 W, and it requires only a 300 W PSU, making it far easier to integrate into a system. Its 7 nm process and higher transistor density (41.0M / mm² vs 25.3M / mm²) mean it delivers competitive performance with less power draw. The 0.8% OpenCL win indicates that for OpenCL-specific workloads, the RX 5600 OEM is not a downgrade. Its higher boost clock (1560 MHz vs 1250 MHz) and game clock (1375 MHz) also suggest better responsiveness in scenarios that scale with clock speed rather than shader count. The PCIe 4.0 interface is another advantage for systems that support it, offering double the bandwidth of the Pro Vega 56’s PCIe 3.0.

The use-case split is clean: the Pro Vega 56 is for users who need maximum compute performance and memory bandwidth, particularly in Vulkan-heavy environments. The RX 5600 OEM is for users who prioritize power efficiency, lower system requirements, and OpenCL-specific tasks, and who are willing to accept a 9.6% lower average score. There is no tie-breaker — the Pro Vega 56 is the performance king, and the RX 5600 OEM is the efficiency pick.

DETAILED SPECIFICATIONS

SPECIFICATION
Pro Vega 56
RX 5600 OEM
Core Specs
Shading Units
3,584
2,048 -42.9%
Shaders
3,584
2,048 -42.9%
TMUs
224
128 -42.9%
ROPs
64
64 0.0%
Compute Units
56
32 -42.9%
Clocks
Base Clock
1138 MHz
1130 MHz
Boost Clock
1250 MHz
1560 MHz
Game Clock
—
1375 MHz
Memory Clock
786 MHz 1572 Mbps effective
1500 MHz 12 Gbps effective
Memory
Memory Size
8 GB
6 GB
VRAM (MB)
8,192
6,144 -25.0%
Memory Type
HBM2
GDDR6
Memory Bus
2048 bit
192 bit
Bandwidth
402.4 GB/s
288.0 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
4 MB
3 MB
Performance
Pixel Rate
80.00 GPixel/s
99.84 GPixel/s
Texture Rate
280.0 GTexel/s
199.7 GTexel/s
FP32 (TFLOPS)
8.960 TFLOPS
6.390 TFLOPS
FP64 (TFLOPS)
560.0 GFLOPS (1:16)
399.4 GFLOPS (1:16)
FP16 (TFLOPS)
17.92 TFLOPS (2:1)
12.78 TFLOPS (2:1)
Power
TDP
210 W
125 W
TDP (W)
210
125 -40.5%
Suggested PSU
—
300 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
GCN 5.0
RDNA 1.0
GPU Name
Vega 10
Navi 10
Generation
Radeon Pro Mac (Vega Series)
Navi (RX 5000)
Process Size
14 nm
7 nm
Transistors
12,500 million
10,300 million
Die Size
495 mm²
251 mm²
Foundry
GlobalFoundries
TSMC
Density
25.3M / mm²
41.0M / mm²
API Support
DirectX
12 (12_1)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
2.1
2.1
Shader Model
6.7
6.8
Physical
Slot Width
IGP
Dual-slot
Outputs
1x HDMI 2.0b3x DisplayPort 1.4a
1x HDMI 2.0b3x DisplayPort 1.4a
Bus Interface
PCIe 3.0 x16
PCIe 4.0 x16
Other
Production
End-of-life
End-of-life
Predecessor
—
Vega
Successor
—
Navi II
View Radeon Pro Vega 56 Details View Radeon RX 5600 OEM Details