AMD Radeon PRO V710 vs AMD Radeon Pro WX 9100 Comparison
AMD Radeon PRO V710
Radeon Pro WX 9100
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO V710 vs AMD Radeon Pro WX 9100
Head-to-Head Benchmarks
The only directly comparable benchmark between the AMD Radeon Pro WX 9100 and the AMD Radeon PRO V710 is Geekbench OpenCL, and the result is decisive. The Radeon PRO V710 scores 116,460 points, while the Radeon Pro WX 9100 manages 66,605 points. That is a 42.8% advantage for the newer card, a gap that dwarfs the margins seen between either card and its nearest rivals. The Radeon Pro WX 9100 sits within 0.8% of the AMD Radeon Pro Vega 56 and 0.6% of the NVIDIA CMP 30HX, while the Radeon PRO V710 is only 0.2% ahead of the NVIDIA P102-100 and 0.5% ahead of the AMD Radeon RX 6950 XT. The head-to-head delta is far larger than any of those inter-model spreads, indicating a genuine generational leap rather than a close-run contest.
In other benchmark categories, the data is sparse but revealing. The Radeon PRO V710 also holds a 3DMark Steel Nomad DX12 score of 853, a test that the Radeon Pro WX 9100 has no recorded result for. The older card counters with Geekbench Metal and Vulkan scores of 71,319 and 54,711 respectively, tests that the Radeon PRO V710 has not been run through in this dataset. What the averages show is a more complex picture: the Radeon Pro WX 9100 has an average benchmark score of 64,212 across all its tests, placing it at the 89th percentile of all GPUs. The Radeon PRO V710 averages 58,657, which puts it at the 88th percentile. Despite losing the only direct comparison by a wide margin, the WX 9100 has a higher average score because its Metal and Vulkan results are strong enough to lift its mean above the V710's OpenCL-dominated average.
The wins tally reflects this: the Radeon Pro WX 9100 wins 0 of the head-to-head tests, while the Radeon PRO V710 wins 1. But that single win is the OpenCL test, which is the only common ground. The WX 9100's 71,319 Metal score is 7.1% higher than its OpenCL result, and its Vulkan score of 54,711 is 17.9% lower than OpenCL. The V710's OpenCL score of 116,460 is nearly double the WX 9100's best result in any test. This suggests the V710's compute architecture is substantially more efficient, while the WX 9100's older GCN design shows more variance across API workloads.
Architecture Differences
The two cards represent completely different eras of AMD GPU design. The Radeon Pro WX 9100 uses the Vega 10 chip on GCN 5.0 architecture, built on a 14 nm process at GlobalFoundries. The Radeon PRO V710 uses the Navi 32 chip on RDNA 3.0 architecture, fabricated by TSMC on a 5 nm node. The process shrink is dramatic: transistor density jumps from 25.3 million per square millimeter to 81.2 million per square millimeter, a 3.2x increase. Total transistor count goes from 12,500 million to 28,100 million, despite the die size shrinking from 495 mm² to 346 mm².
The compute layout differs fundamentally. The WX 9100 has 4,096 shading units, 256 texture mapping units, and 64 ROPs. The V710 has fewer shading units at 3,456, fewer TMUs at 216, but more ROPs at 96. The V710 also adds 54 ray tracing cores, a feature entirely absent from the WX 9100. Clock speeds tell the efficiency story: the WX 9100 runs at 1200 MHz base and 1500 MHz boost, while the V710 runs at 1900 MHz base and 2000 MHz boost. That is a 58% higher base clock and a 33% higher boost clock, achieved at a lower power draw. The V710 also supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, whereas the WX 9100 is limited to DirectX 12 (12_1) and Vulkan 1.3. Both support OpenGL 4.6.
Memory architecture is another major divergence. The WX 9100 uses 16 GB of HBM2 on a 2048-bit bus, delivering 483.8 GB/s of bandwidth. The V710 uses 28 GB of GDDR6 on a 224-bit bus, delivering 504.0 GB/s. The V710 has 75% more memory capacity and 4.2% more bandwidth, despite a bus width that is only 11% of the WX 9100's. The memory clocks reflect this: the WX 9100's HBM2 runs at 945 MHz (1890 Mbps effective), while the V710's GDDR6 runs at 2250 MHz (18 Gbps effective). The V710's memory configuration is clearly optimized for capacity and bandwidth efficiency.
Power and physical design also set them apart. The WX 9100 has a 230 W TDP, requires a 550 W power supply, and takes a dual-slot form factor with 1x 6-pin and 1x 8-pin connectors. The V710 has a 158 W TDP, a 450 W power supply recommendation, and fits in a single slot with just one 8-pin connector. The V710 also uses PCIe 4.0 x16, while the WX 9100 is limited to PCIe 3.0 x16. The display output situation is notably different: the WX 9100 has 6x mini-DisplayPort 1.4a outputs, while the V710 has no display outputs at all, indicating it is designed for compute or server workloads rather than workstation graphics.
FAQ
Q: Which card is faster in OpenCL compute?
A: The AMD Radeon PRO V710 is 42.8% faster in Geekbench OpenCL, scoring 116,460 versus the Radeon Pro WX 9100's 66,605.
Q: Does the Radeon Pro WX 9100 have any benchmark advantage?
A: The WX 9100 has a higher average benchmark score at 64,212 versus 58,657, and it places at the 89th percentile of all GPUs compared to the V710's 88th. It also scores 71,319 in Geekbench Metal and 54,711 in Vulkan, tests the V710 has no recorded results for.
Q: How does the memory configuration differ?
A: The WX 9100 uses 16 GB of HBM2 on a 2048-bit bus with 483.8 GB/s bandwidth. The V710 uses 28 GB of GDDR6 on a 224-bit bus with 504.0 GB/s bandwidth.
Q: Which card supports ray tracing?
A: Only the Radeon PRO V710 has ray tracing cores, with 54 of them. The Radeon Pro WX 9100 has no ray tracing hardware.
Q: What are the power requirements for each card?
A: The WX 9100 has a 230 W TDP and requires a 550 W power supply with 1x 6-pin and 1x 8-pin connectors. The V710 has a 158 W TDP and requires a 450 W power supply with a single 8-pin connector.
Q: Can either card output video to displays?
A: The WX 9100 has 6x mini-DisplayPort 1.4a outputs. The V710 has no display outputs, making it unsuitable for direct display connection.
Specification Differences
| Specification | AMD Radeon Pro WX 9100 | AMD Radeon PRO V710 |
|---|---|---|
| Chip | Vega 10 | Navi 32 |
| Architecture | GCN 5.0 | RDNA 3.0 |
| Process Node | 14 nm | 5 nm |
| Foundry | GlobalFoundries | TSMC |
| Transistors | 12,500 million | 28,100 million |
| Die Size | 495 mm² | 346 mm² |
| Transistor Density | 25.3M / mm² | 81.2M / mm² |
| Base Clock | 1200 MHz | 1900 MHz |
| Boost Clock | 1500 MHz | 2000 MHz |
| Memory Clock | 945 MHz, 1890 Mbps effective | 2250 MHz, 18 Gbps effective |
| Memory Size | 16 GB | 28 GB |
| Memory Type | HBM2 | GDDR6 |
| Memory Bus Width | 2048 bit | 224 bit |
| Memory Bandwidth | 483.8 GB/s | 504.0 GB/s |
| Shading Units | 4096 | 3456 |
| TMUs | 256 | 216 |
| ROPs | 64 | 96 |
| Ray Tracing Cores | None | 54 |
| Pixel Rate | 96.00 GPixel/s | 192.0 GPixel/s |
| Texture Rate | 384.0 GTexel/s | 432.0 GTexel/s |
| FP32 | 12.29 TFLOPS | 27.65 TFLOPS |
| FP16 | 24.58 TFLOPS (2:1) | 27.65 TFLOPS (1:1) |
| TDP | 230 W | 158 W |
| Slot Width | Dual-slot | Single-slot |
| Power Connectors | 1x 6-pin + 1x 8-pin | 1x 8-pin |
| Suggested PSU | 550 W | 450 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |
| Display Outputs | 6x mini-DisplayPort 1.4a | No outputs |
| DirectX | 12 (12_1) | 12 Ultimate (12_2) |
| Vulkan | 1.3 | 1.4 |
| Release Date | 2017-07-09 | 2024-10-02 |
| Launch MSRP | 1,599 USD | None |
Where Each One Wins
The Radeon PRO V710 wins in raw compute throughput and efficiency. Its FP32 performance of 27.65 TFLOPS is more than double the WX 9100's 12.29 TFLOPS, and its FP16 performance of 27.65 TFLOPS (1:1) matches its FP32 rate, whereas the WX 9100's FP16 is 24.58 TFLOPS (2:1) and requires a ratio penalty. The V710 also wins on texture rate at 432.0 GTexel/s versus 384.0 GTexel/s, and pixel rate at 192.0 GPixel/s versus 96.00 GPixel/s. Its OpenCL score of 116,460 versus 66,605 confirms the compute advantage in practice. The V710's 54 ray tracing cores give it capabilities the WX 9100 cannot match, and its 28 GB of memory with 504.0 GB/s bandwidth provides more capacity and slightly higher bandwidth. The V710 achieves all this at a lower TDP of 158 W versus 230 W, in a single-slot design requiring a 450 W PSU rather than 550 W. Its PCIe 4.0 interface also doubles the bus bandwidth available to the host system.
The Radeon Pro WX 9100 wins in display and API versatility. Its 6x mini-DisplayPort 1.4a outputs make it a direct workstation display card, while the V710 has no outputs at all. The WX 9100 also holds higher average benchmark scores (64,212 versus 58,657) and a better percentile ranking (89th versus 88th), driven by its strong Metal performance of 71,319 and Vulkan result of 54,711. For workloads that rely on Metal or Vulkan, the WX 9100 has proven results, while the V710's performance in those APIs is unmeasured. The WX 9100 also has a launch MSRP of 1,599 USD, giving it a defined market position, whereas the V710 has no listed MSRP, suggesting a different go-to-market strategy. The WX 9100's HBM2 memory on a 2048-bit bus may also be preferable for certain memory-latency-sensitive workloads, despite the lower capacity and bandwidth.
For compute-heavy tasks like OpenCL workloads, the V710 is the clear choice, offering 42.8% higher performance and 75% more memory. For traditional workstation use with multiple displays, the WX 9100 is the only option, as the V710 cannot drive any monitor. The V710 is better suited for headless server deployments or dedicated compute nodes, while the WX 9100 fits desktop workstation scenarios. The generational gap in architecture, from GCN 5.0 to RDNA 3.0, translates into a massive efficiency improvement: the V710 delivers more than twice the FP32 throughput at 31% lower power draw. The V710 is also the only card of the two with any ray tracing capability, making it the sole choice for applications that leverage that feature.