AMD Radeon Pro 5300M vs NVIDIA RTX PRO 6000D Blackwell Max-Q Comparison

AMD
RADEON

AMD Radeon Pro 5300M

CORE STATE Navi 14
VRAM 4 GB
CLOCK SPEED 1250 MHz
TDP 85 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 1.0
nm
PROCESS 7 nm
LAUNCH DATE 2019
VS
NVIDIA
GEFORCE

RTX PRO 6000D Blackwell Max-Q

CORE STATE GB202
VRAM 96 GB
CLOCK SPEED 2288 MHz
TDP 300 W
BUS WIDTH 512 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
33,626
N/A
geekbench_opencl
29,252
N/A
geekbench_vulkan
27,912
N/A
passmark_directx_10
36
N/A
passmark_directx_11
37
N/A
passmark_directx_12
25
N/A
passmark_directx_9
80
N/A
passmark_g2d
582
N/A
passmark_g3d
5,918
N/A
passmark_gpu_compute
2,658
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
11,088

Analysis: AMD Radeon Pro 5300M vs NVIDIA RTX PRO 6000D Blackwell Max-Q

Head-to-Head Benchmarks

The benchmark data for these two GPUs cannot be compared in a single shared test, as the NVIDIA RTX PRO 6000D Blackwell Max-Q has only one recorded benchmark (3DMark Steel Nomad DX12, score 11088), while the AMD Radeon Pro 5300M has a suite of Geekbench and Passmark results but no overlapping 3DMark score. However, the aggregate averages tell a decisive story. The NVIDIA part posts an average benchmark score of 11088, while the AMD part averages 10013 across its ten tests—a difference of 1075 points, or roughly 10.7% higher for the NVIDIA product. This is a modest gap in aggregate terms, but the nature of the tests differs substantially.

The NVIDIA GPU’s single 3DMark Steel Nomad DX12 result of 11088 places it at the 50th percentile of all GPUs. Its nearest rivals in the database are the NVIDIA RTX PRO 6000 Blackwell Max-Q (identical score, 0% delta), the AMD Radeon RX 550 (11075, 0.1% slower), and the NVIDIA GeForce GTX 1650 SUPER (11047, 0.4% slower). The AMD FirePro W4300 is the only listed rival ahead, with a score of 11225 (1.2% faster). This clustering indicates that the RTX PRO 6000D, despite its massive hardware specifications, lands in a mid-pack performance tier in this particular DirectX 12 workload—notably, it is not dramatically ahead of much older, lower-tier cards in this single test.

The AMD Radeon Pro 5300M’s strongest result is its Geekbench Metal score of 33626, followed by OpenCL at 29252 and Vulkan at 27912. Its Passmark results are far lower: DirectX 9 at 80, DirectX 11 at 37, DirectX 10 at 36, DirectX 12 at 25, with a G3D score of 5918 and GPU compute at 2658. The 5300M sits at the 48th percentile of all GPUs, just two points below the NVIDIA part. Its nearest rivals include the NVIDIA Quadro K5100M (10043, 0.3% higher), the AMD Radeon R9 M375 (10070, 0.6% higher), the GeForce GTX 870M (9959, 0.5% lower), and the NVIDIA Quadro 6000 (9846, 1.7% lower). This places the 5300M in a narrow competitive band around the 10000-point mark, with no rival more than 1.7% away in either direction.

The absence of head-to-head benchmarks means there are no direct wins for either product (winsA: 0, winsB: 0). What the data does show is that the NVIDIA part’s single test score is 1075 points higher than the AMD part’s average, but the AMD part has a broader test portfolio. In raw compute terms, the NVIDIA GPU’s FP32 throughput is 110.1 TFLOPS versus 3.200 TFLOPS for the AMD—a 34.4x difference—and its texture rate is 1,720.6 GTexel/s versus 100.0 GTexel/s, a 17.2x gap. These specification deltas dwarf the benchmark score differences, suggesting that the 3DMark Steel Nomad test does not stress the NVIDIA part’s full capabilities, or that the test is not representative of its peak workload performance.

The Verdict

From the data alone, the NVIDIA RTX PRO 6000D Blackwell Max-Q is the superior product in aggregate benchmark performance, posting an average score 10.7% higher than the AMD Radeon Pro 5300M. However, the comparison is lopsided in test coverage: the NVIDIA part has one result, while the AMD part has ten. The NVIDIA GPU’s 50th percentile ranking versus the AMD’s 48th percentile is a narrow gap, but the underlying hardware specifications are in entirely different leagues.

The RTX PRO 6000D is the clear choice for workloads that leverage its massive compute resources—96 GB of GDDR7 memory, 24,064 shading units, 188 RT cores, and 752 tensor cores—especially given its 5 nm process node and 92,200 million transistors. The AMD part, with its 4 GB GDDR6 memory, 1,280 shading units, and no ray tracing or tensor cores, is a mobile-era product (RDNA 1.0, 7 nm) that is now end-of-life. Its best benchmark scores come from Geekbench Metal and OpenCL, suggesting it was optimized for Apple Mac environments, but its Passmark DirectX results are extremely low (scores of 25-80), indicating weak DirectX performance.

The verdict is straightforward: for any modern DirectX 12 workload, the NVIDIA part’s 11088 Steel Nomad score, while not topping the charts, represents a functional baseline. The AMD part’s DirectX 12 score of 25 is effectively unusable for gaming or professional D3D applications. For compute-heavy tasks like ray tracing, AI inference (tensor cores), or large dataset manipulation (96 GB VRAM), the NVIDIA GPU is the only viable option. The AMD part’s niche appears to be legacy Metal/OpenCL workflows on Mac platforms, where its 33626 Metal score shows relative strength. There is no scenario in the data where the AMD part wins on raw performance; its only advantages are its smaller size (no slot width or dimensions listed) and lower power draw (85 W vs. 300 W), but those are not benchmark wins.

Architecture Differences

The NVIDIA RTX PRO 6000D Blackwell Max-Q is built on the Blackwell 2.0 architecture using the GB202 chip, fabricated on a 5 nm process at TSMC. It packs 92,200 million transistors into a 750 mm² die, yielding a transistor density of 122.9M / mm². The AMD Radeon Pro 5300M uses the RDNA 1.0 architecture with the Navi 14 chip, on a 7 nm process, with 6,400 million transistors on a 158 mm² die—a density of 40.5M / mm². The NVIDIA chip is roughly 4.7x larger in die area and 14.4x denser in transistor count.

Core configuration differs dramatically. The NVIDIA part has 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores. The AMD part has 1,280 shading units, 80 TMUs, and 32 ROPs, with no RT cores or tensor cores listed. This means the NVIDIA GPU supports hardware ray tracing and AI acceleration, while the AMD part does not.

Memory subsystems are generations apart. The NVIDIA GPU uses 96 GB of GDDR7 on a 512-bit bus, delivering 1.79 TB/s bandwidth. The AMD part has 4 GB of GDDR6 on a 128-bit bus, with 192.0 GB/s bandwidth. That is a 9.3x memory capacity advantage and a 9.3x bandwidth advantage for NVIDIA.

Clock speeds: the NVIDIA GPU runs at 1590 MHz base and 2288 MHz boost, with memory at 1750 MHz (28 Gbps effective). The AMD GPU runs at 1000 MHz base and 1250 MHz boost, with memory at 1500 MHz (12 Gbps effective). Pixel rate is 439.3 GPixel/s for NVIDIA versus 40.00 GPixel/s for AMD—an 11x difference. Texture rate is 1,720.6 GTexel/s versus 100.0 GTexel/s—a 17.2x gap. FP32 compute is 110.1 TFLOPS versus 3.200 TFLOPS, with the AMD part offering FP16 at 6.400 TFLOPS (2:1 ratio) while NVIDIA provides FP16 at 110.1 TFLOPS (1:1).

Power and interface also differ. The NVIDIA GPU has a 300 W TDP, uses a 1x 16-pin power connector, requires a 700 W suggested PSU, and is dual-slot with PCIe 5.0 x16. The AMD part has an 85 W TDP, no power connectors (portable device dependent), and uses PCIe 4.0 x8. The NVIDIA GPU supports 4x DisplayPort 2.1b, while the AMD part’s display outputs are "Portable Device Dependent." Both support DirectX 12 (NVIDIA at 12 Ultimate 12_2, AMD at 12_1), OpenGL 4.6, and Vulkan 1.4.

FAQ

Q: Which GPU has higher raw compute performance?

A: The NVIDIA RTX PRO 6000D Blackwell Max-Q delivers 110.1 TFLOPS FP32, while the AMD Radeon Pro 5300M delivers 3.200 TFLOPS—a 34.4x difference in NVIDIA’s favor.

Q: What is the memory capacity difference?

A: The NVIDIA GPU has 96 GB of GDDR7 on a 512-bit bus with 1.79 TB/s bandwidth. The AMD GPU has 4 GB of GDDR6 on a 128-bit bus with 192.0 GB/s bandwidth. Both capacity and bandwidth are 9.3x higher on the NVIDIA part.

Q: Does the AMD Radeon Pro 5300M support ray tracing?

A: No. The AMD part lists no RT cores and no tensor cores in its specifications, whereas the NVIDIA GPU includes 188 RT cores and 752 tensor cores.

Q: How do their benchmark scores compare?

A: The NVIDIA part’s average benchmark score is 11088, versus 10013 for the AMD part—a 10.7% higher aggregate for NVIDIA. The NVIDIA GPU ranks at the 50th percentile of all GPUs, while the AMD ranks at the 48th.

Q: Are these GPUs from the same generation?

A: No. The NVIDIA GPU is from the Blackwell PRO W (x000) generation, released on 2025-03-17, and is still active. The AMD GPU is from the Radeon Pro Mac (Navi Mobile) generation, released on 2019-11-12, and is end-of-life.

Q: What are the power requirements?

A: The NVIDIA GPU has a 300 W TDP, requires a 1x 16-pin power connector, and a 700 W suggested PSU. The AMD GPU has an 85 W TDP and uses no power connectors, being portable-device dependent.

Where Each One Wins

NVIDIA RTX PRO 6000D Blackwell Max-Q wins in:

  • DirectX 12 performance: Its 3DMark Steel Nomad score of 11088 is 10.7% higher than the AMD’s average, and the AMD’s Passmark DirectX 12 score of 25 is negligible by comparison.
  • Raw compute throughput: 110.1 TFLOPS FP32 versus 3.200 TFLOPS, making it suitable for heavy FP32 workloads like simulation or scientific computing.
  • Memory capacity and bandwidth: 96 GB GDDR7 at 1.79 TB/s enables large dataset handling and high-bandwidth tasks that the 4 GB / 192 GB/s AMD part cannot approach.
  • Ray tracing and AI: With 188 RT cores and 752 tensor cores, it supports hardware-accelerated ray tracing and tensor operations, which the AMD part lacks entirely.
  • Pixel and texture fill rates: 439.3 GPixel/s and 1,720.6 GTexel/s are 11x and 17.2x higher, respectively, benefiting resolution-heavy and texture-heavy rendering.
  • Modern connectivity: PCIe 5.0 x16 and 4x DisplayPort 2.1b provide higher bandwidth and display flexibility versus PCIe 4.0 x8 and portable-device-dependent outputs.

AMD Radeon Pro 5300M wins in:

  • Metal API performance: Its Geekbench Metal score of 33626 is its highest result, indicating relative strength in Apple’s Metal framework, useful for Mac-based workflows.
  • OpenCL and Vulkan scores: Scores of 29252 and 27912 show moderate compute capability in cross-platform APIs, though still far below NVIDIA’s raw compute.
  • Power efficiency: At 85 W TDP versus 300 W, it consumes far less power and requires no external power connector, making it suitable for portable devices where power is constrained.
  • Legacy DirectX 9 performance: Its Passmark DirectX 9 score of 80 is its best DirectX result, suggesting it may handle older DX9 workloads better than newer ones, though still at low absolute levels.
  • Physical footprint: With no listed dimensions or slot width, it is designed for compact mobile integration, whereas the NVIDIA part is dual-slot and 267 mm long.

The data does not show any benchmark where the AMD part wins on absolute score. Its wins are limited to API-specific niches (Metal) and efficiency metrics, not performance. For any task requiring modern graphics features, high memory, or compute density, the NVIDIA GPU is the only data-supported choice.

DETAILED SPECIFICATIONS

SPECIFICATION
Pro 5300M
RTX PRO 6000D Blackwell Max-Q
Core Specs
Shading Units
1,280
24,064 +1780.0%
Shaders
1,280
24,064 +1780.0%
TMUs
80
752 +840.0%
ROPs
32
192 +500.0%
Compute Units
20
—
SM Count
—
188
Clocks
Base Clock
1000 MHz
1590 MHz
Boost Clock
1250 MHz
2288 MHz
Memory Clock
1500 MHz 12 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
96 GB
VRAM (MB)
4,096
98,304 +2300.0%
Memory Type
GDDR6
GDDR7
Memory Bus
128 bit
512 bit
Bandwidth
192.0 GB/s
1.79 TB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
128 MB
Performance
Pixel Rate
40.00 GPixel/s
439.3 GPixel/s
Texture Rate
100.0 GTexel/s
1,720.6 GTexel/s
FP32 (TFLOPS)
3.200 TFLOPS
110.1 TFLOPS
FP64 (TFLOPS)
200.0 GFLOPS (1:16)
1.721 TFLOPS (1:64)
FP16 (TFLOPS)
6.400 TFLOPS (2:1)
110.1 TFLOPS (1:1)
AI/RT
RT Cores
—
188
Tensor Cores
—
752
Power
TDP
85 W
300 W
TDP (W)
85
300 +252.9%
Suggested PSU
—
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 1.0
Blackwell 2.0
GPU Name
Navi 14
GB202
Generation
Radeon Pro Mac (Navi Mobile)
Blackwell PRO W (x000)
Process Size
7 nm
5 nm
Transistors
6,400 million
92,200 million
Die Size
158 mm²
750 mm²
Foundry
TSMC
TSMC
Density
40.5M / mm²
122.9M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
12.0
Shader Model
6.8
6.9
Physical
Slot Width
—
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
4x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x16
Other
Launch Price
—
8,565 USD
Production
End-of-life
Active
Predecessor
—
Workstation Ada
View Radeon Pro 5300M Details View RTX PRO 6000D Blackwell Max-Q Details