AMD Radeon Pro 450 vs NVIDIA RTX PRO 6000D Blackwell Max-Q Comparison
AMD Radeon Pro 450
RTX PRO 6000D Blackwell Max-Q
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Pro 450 vs NVIDIA RTX PRO 6000D Blackwell Max-Q
The NVIDIA RTX PRO 6000D Blackwell Max-Q and the AMD Radeon Pro 450 represent two extremes of the GPU spectrum, separated by nearly a decade of architectural evolution and targeting entirely different segments of the workstation market. The data shows a stark contrast: the NVIDIA card is a 300 W dual-slot behemoth built on a 5 nm process, while the AMD part is a 35 W MXM module from a 14 nm era. The benchmark results, while not directly comparable due to different test suites, place both cards at similar percentile rankings—50th and 49th, respectively—yet the underlying specifications and performance deltas tell a story of massive generational and capability gaps.
Head-to-Head Benchmarks
The FACT PACK does not provide a shared benchmark test between the two cards, making a direct apples-to-apples comparison impossible. However, the average benchmark scores and nearest rival data allow for meaningful inference. The NVIDIA RTX PRO 6000D Blackwell Max-Q achieves an average benchmark score of 11088, based on a single 3DMark Steel Nomad DX12 test. The AMD Radeon Pro 450, with three Geekbench results (Metal, OpenCL, Vulkan), posts an average of 10804. This puts the NVIDIA part just 2.6% ahead in raw average score, but this is misleading when considering the test workloads.
The NVIDIA card’s nearest rivals include the NVIDIA RTX PRO 6000 Blackwell Max-Q with an identical score (0% delta) and the AMD Radeon RX 550, which trails by a mere 0.1%. The AMD Radeon Pro 450’s closest competitor is the NVIDIA GeForce MX350, which is 0.7% faster, and the NVIDIA Quadro K2200, which is 0.4% slower. These rival comparisons indicate that both cards are clustered in a mid-tier performance band when using these aggregate metrics, but the specific workloads differ dramatically. The 3DMark Steel Nomad test on the NVIDIA card is a modern DX12 load, while the AMD card’s Geekbench scores span Metal, OpenCL, and Vulkan APIs, reflecting its historical role in Mac systems rather than a direct performance duel.
In terms of the biggest wins, the data shows only one benchmark for the NVIDIA card, scoring 11088 in 3DMark Steel Nomad DX12. For the AMD card, the highest single score is 12893 in Geekbench Metal, which is 16.3% higher than its own OpenCL result of 9002 and 22.5% higher than its Vulkan score of 10518. This suggests the Radeon Pro 450 is particularly strong in Apple’s Metal API, a niche advantage that does not translate to the DX12-centric testing of the NVIDIA card. Conversely, the NVIDIA card’s sheer compute resources—110.1 TFLOPS FP32 versus the AMD’s 1,024.0 GFLOPS—imply that the 3DMark score underrepresents its capability in professional workloads that are not captured by the limited benchmark suite.
Where Each One Wins
The use-case split is defined by the benchmark availability and the architectural focus. The NVIDIA RTX PRO 6000D Blackwell Max-Q wins decisively in any scenario requiring raw throughput, given its 24,064 shading units, 752 tensor cores, and 188 RT cores. The data shows a 110.1 TFLOPS FP32 rate, which is 107.5 times higher than the AMD card’s 1,024.0 GFLOPS. This makes the NVIDIA part the clear choice for compute-heavy tasks like rendering, simulation, or AI inference, where the tensor cores and massive memory bandwidth (1.79 TB/s) come into play.
The AMD Radeon Pro 450, by contrast, wins in scenarios where power efficiency and portability are paramount. With a 35 W TDP, it consumes 8.6 times less power than the NVIDIA’s 300 W. Its MXM module form factor and "Portable Device Dependent" display outputs indicate it is designed for laptops or compact systems where the NVIDIA’s 267 mm length and 40 mm width would be impractical. The Geekbench Metal score of 12893 suggests that the AMD card has a software optimization advantage in macOS environments, making it a viable option for legacy Mac Pro users, despite its end-of-life status. The NVIDIA card has no Metal benchmark data, so its performance in that API is unknown, but the architectural gap suggests it would dominate if tested.
Architecture Differences
The architectural chasm between these two GPUs is immense. The NVIDIA RTX PRO 6000D Blackwell Max-Q uses the GB202 chip on a 5 nm TSMC process, packing 92,200 million transistors on a 750 mm² die for a density of 122.9 million transistors per square millimeter. The AMD Radeon Pro 450 uses the Baffin chip on a 14 nm GlobalFoundries process, with just 3,000 million transistors on a 123 mm² die, yielding a density of 24.4 million per square millimeter. This represents a 30.7-fold increase in transistor count and a 5.0-fold increase in density for the NVIDIA part.
Memory architecture is equally divergent. The NVIDIA card features 96 GB of GDDR7 on a 512-bit bus, delivering 1.79 TB/s of bandwidth. The AMD card has 2 GB of GDDR5 on a 128-bit bus, with only 81.28 GB/s. This 22-fold bandwidth advantage for NVIDIA is critical for large datasets. The NVIDIA card’s 752 TMUs and 192 ROPs dwarf the AMD’s 40 TMUs and 16 ROPs, leading to pixel rates of 439.3 GPixel/s versus 12.80 GPixel/s and texture rates of 1,720.6 GTexel/s versus 32.00 GTexel/s. The NVIDIA part also supports PCIe 5.0 x16, while the AMD uses PCIe 3.0 x8, halving the available lanes and cutting interface bandwidth.
Feature sets differ fundamentally. The NVIDIA card includes 188 RT cores and 752 tensor cores, enabling hardware ray tracing and AI acceleration, while the AMD card has none (null values for both). API support shows NVIDIA at DirectX 12 Ultimate (12_2) and Vulkan 1.4, whereas AMD is at DirectX 12 (12_0) and Vulkan 1.3. The NVIDIA card’s boost clock is 2288 MHz, while the AMD card has no listed base or boost clocks, only memory clock data. The NVIDIA card also has a defined 700 W suggested PSU and a single 16-pin power connector, whereas the AMD card lists no power connector or PSU requirement, consistent with its lower-power MXM design.
FAQ
Q: Which card has higher average benchmark scores?
A: The NVIDIA RTX PRO 6000D Blackwell Max-Q has an average score of 11088, which is 2.6% higher than the AMD Radeon Pro 450’s average of 10804. However, this comparison is based on different test suites: 3DMark Steel Nomad for NVIDIA and Geekbench Metal/OpenCL/Vulkan for AMD.
Q: What is the memory capacity and type difference?
A: The NVIDIA card uses 96 GB of GDDR7 on a 512-bit bus, while the AMD card uses 2 GB of GDDR5 on a 128-bit bus. This results in 1.79 TB/s bandwidth for NVIDIA versus 81.28 GB/s for AMD, a 22-fold difference.
Q: Does the AMD card support ray tracing or tensor cores?
A: No. The FACT PACK lists null values for RT cores and tensor cores on the AMD Radeon Pro 450. The NVIDIA card has 188 RT cores and 752 tensor cores, making it capable of hardware-accelerated ray tracing and AI workloads.
Q: What is the power consumption disparity?
A: The NVIDIA RTX PRO 6000D Blackwell Max-Q has a 300 W TDP, while the AMD Radeon Pro 450 has a 35 W TDP. This makes the AMD card 8.6 times more power-efficient, suitable for portable devices.
Q: Are these cards comparable in any way?
A: Both cards sit near the 50th percentile in the benchmark database (NVIDIA at 50, AMD at 49), indicating they are mid-pack in aggregate performance. However, the NVIDIA card’s nearest rivals include the AMD Radeon RX 550 (0.1% slower), while the AMD card’s rivals include the NVIDIA GeForce MX350 (0.7% faster), showing they compete in different performance leagues.
Q: Which card has a longer production lifespan?
A: The NVIDIA card is listed as "Active" with a release date of 2025-03-17, while the AMD card is "End-of-life" with a release date of 2016-10-29. The NVIDIA card is nearly a decade newer and still in production.
The Verdict
The data dictates a clear split based on workload and physical constraints. For any professional or compute-intensive task, the NVIDIA RTX PRO 6000D Blackwell Max-Q is the only rational choice. Its 110.1 TFLOPS FP32 performance, 96 GB GDDR7 memory, and 1.79 TB/s bandwidth are in a different stratosphere from the AMD card’s 1,024.0 GFLOPS and 2 GB GDDR5. The presence of 752 tensor cores and 188 RT cores means the NVIDIA card can handle AI training and ray-traced rendering, tasks the AMD card cannot touch. The NVIDIA card also supports newer APIs (DirectX 12 Ultimate, Vulkan 1.4) and a faster PCIe 5.0 interface.
The AMD Radeon Pro 450 is a legacy product, end-of-life since its 2016 release. Its only advantages are power draw (35 W versus 300 W) and form factor (MXM module versus dual-slot). The Geekbench Metal score of 12893 suggests it retains some utility in older Mac systems where NVIDIA drivers are unavailable. But given its 2 GB memory limit and lack of modern features, it is only viable for basic 2D output or legacy software compatibility. The NVIDIA card’s launch MSRP is 8,565 USD, reflecting its enterprise positioning, while the AMD card has no listed MSRP, indicating its OEM-only distribution. In short, the NVIDIA card wins on every performance metric, while the AMD card wins only on efficiency and portability, which are irrelevant for a 300 W dual-slot workstation card.
Specification Differences
The following fields differ between the NVIDIA RTX PRO 6000D Blackwell Max-Q and the AMD Radeon Pro 450:
- Chip: GB202 versus Baffin
- Architecture: Blackwell 2.0 versus GCN 4.0
- Process Node: 5 nm (TSMC) versus 14 nm (GlobalFoundries)
- Transistors: 92,200 million versus 3,000 million
- Die Size: 750 mm² versus 123 mm²
- Transistor Density: 122.9M / mm² versus 24.4M / mm²
- Memory Size: 96 GB versus 2 GB
- Memory Type: GDDR7 versus GDDR5
- Memory Bus Width: 512 bit versus 128 bit
- Memory Bandwidth: 1.79 TB/s versus 81.28 GB/s
- Shading Units: 24064 versus 640
- TMUs: 752 versus 40
- ROPs: 192 versus 16
- RT Cores: 188 versus null
- Tensor Cores: 752 versus null
- Pixel Rate: 439.3 GPixel/s versus 12.80 GPixel/s
- Texture Rate: 1,720.6 GTexel/s versus 32.00 GTexel/s
- FP32: 110.1 TFLOPS versus 1,024.0 GFLOPS
- TDP: 300 W versus 35 W
- Slot Width: Dual-slot versus MXM Module
- Power Connectors: 1x 16-pin versus null
- Suggested PSU: 700 W versus null
- Bus Interface: PCIe 5.0 x16 versus PCIe 3.0 x8
- Display Outputs: 4x DisplayPort 2.1b versus Portable Device Dependent
- DirectX: 12 Ultimate (12_2) versus 12 (12_0)
- Vulkan: 1.4 versus 1.3
- Dimensions: 267 mm length, 111 mm height, 40 mm width versus null dimensions
- Production Status: Active versus End-of-life
- Release Date: 2025-03-17 versus 2016-10-29
- Launch MSRP: 8,565 USD versus null
- Benchmark Tests: 3DMark Steel Nomad DX12 versus Geekbench Metal, OpenCL, Vulkan
- Percentile: 50 versus 49
- Nearest Rivals: NVIDIA RTX PRO 6000 Blackwell Max-Q, AMD Radeon RX 550, NVIDIA GeForce GTX 1650 SUPER, AMD FirePro W4300 versus NVIDIA Quadro K2200, NVIDIA GeForce MX350, NVIDIA GeForce GTX 560 Ti, AMD Radeon RX 6600S