AMD Radeon HD 8950M vs AMD Radeon RX 9070 XT Comparison

AMD
RADEON

AMD Radeon HD 8950M

CORE STATE Saturn
VRAM 2 GB
CLOCK SPEED —
TDP 100 W
BUS WIDTH 128 bit
ARCHITECTURE GCN 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2013
VS
AMD
RADEON

Radeon RX 9070 XT

CORE STATE Navi 48
VRAM 16 GB
CLOCK SPEED 2970 MHz
TDP 304 W
BUS WIDTH 256 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
13,772
17,428
geekbench_vulkan
12,979
65,879
3dmark_3dmark_steel_nomad_dx12
N/A
7,260
passmark_directx_10
N/A
154
passmark_directx_11
N/A
292
passmark_directx_12
N/A
78
passmark_directx_9
N/A
353
passmark_g2d
N/A
1,328
passmark_g3d
N/A
26,795
passmark_gpu_compute
N/A
15,864

Analysis: AMD Radeon HD 8950M vs AMD Radeon RX 9070 XT

The AMD Radeon RX 9070 XT and AMD Radeon HD 8950M represent two vastly different eras of GPU design, separated by over a decade of architectural evolution. Benchmark data from the FACT PACK shows the RX 9070 XT dominating the head-to-head comparisons, yet the HD 8950M holds a surprisingly competitive position in the overall percentile ranking, sitting at the 54th percentile versus the RX 9070 XT’s 55th. This near-parity in overall standing, despite a massive generational gap, stems from the fact that the HD 8950M’s limited benchmark suite keeps its average score artificially high relative to modern workloads. The RX 9070 XT’s average benchmark score of 13543 is only 1.2% higher than the HD 8950M’s 13376, a margin that obscures the true performance chasm revealed in individual tests.

Head-to-Head Benchmarks

The only two shared benchmarks in the FACT PACK are Geekbench OpenCL and Geekbench Vulkan, and the RX 9070 XT wins both decisively. In Geekbench OpenCL, the RX 9070 XT scores 17428 against the HD 8950M’s 13772, a 26.5% advantage. This is a substantial lead, but it is modest compared to the Vulkan result. In Geekbench Vulkan, the RX 9070 XT achieves 65879, while the HD 8950M manages only 12979, yielding a 407.6% delta in favor of the newer card. The Vulkan gap is so large that it dwarfs every other comparison in the dataset, reflecting the fundamental incompatibility of the older GCN 2.0 architecture with modern asynchronous compute and explicit graphics APIs.

The RX 9070 XT’s wins are not just numerical; they represent architectural superiority. A 26.5% lead in OpenCL shows the raw compute advantage, while the 407.6% lead in Vulkan demonstrates how the newer RDNA 4.0 design scales with low-level API overhead that the HD 8950M cannot handle efficiently. The HD 8950M has no counter-wins; the head-to-head table shows 2 wins for the RX 9070 XT and 0 for the HD 8950M. For context on the RX 9070 XT’s standing, its nearest rivals in the database include the AMD Radeon HD 7770M (deltaPct 0.1), NVIDIA GeForce GTX 570 (deltaPct 0.2), and NVIDIA P106-090 (deltaPct 0.5), all within 1% of its average score. The HD 8950M’s closest competitor is the AMD Radeon RX 5500M at a 0.2% delta, with the AMD FirePro M6100 also at 0.2%, showing it clusters with mid-range mobile parts from a later generation.

Architecture Differences

The architectural chasm between these two GPUs is immense. The RX 9070 XT uses the Navi 48 chip built on RDNA 4.0 architecture, fabricated on a 4 nm TSMC process node. The HD 8950M uses the Saturn chip with GCN 2.0 architecture, on a 28 nm TSMC process. This process difference alone explains the transistor density gap: the RX 9070 XT packs 53,900 million transistors into a 357 mm² die, yielding 151.0M transistors per mm². The HD 8950M has just 2,080 million transistors on a 160 mm² die, for a density of 13.0M per mm². The RX 9070 XT is not merely faster; it is over 11 times denser in transistor packing, enabling far more complex logic in the same physical space.

Core counts reflect this disparity. The RX 9070 XT features 4096 shading units, 256 TMUs, and 128 ROPs, along with 64 dedicated RT cores. The HD 8950M has 768 shading units, 48 TMUs, and 16 ROPs, with no RT cores listed. The RX 9070 XT delivers 48.66 TFLOPS of FP32 compute, while the HD 8950M manages 1.651 TFLOPS, a 29.5x difference. Pixel rate tells a similar story: 380.2 GPixel/s for the RX 9070 XT versus 17.20 GPixel/s for the HD 8950M. Texture rate is 760.3 GTexel/s against 51.60 GTexel/s. The RX 9070 XT also supports FP16 at a 1:1 ratio with FP32, while the HD 8950M has no FP16 data listed, indicating a lack of dedicated half-precision throughput.

Memory architecture further separates them. The RX 9070 XT has 16 GB of GDDR6 on a 256-bit bus, delivering 644.6 GB/s of bandwidth. The HD 8950M has 2 GB of GDDR5 on a 128-bit bus, with 88.00 GB/s. That is a 7.3x bandwidth advantage for the RX 9070 XT, which is critical for modern texture-heavy workloads. The RX 9070 XT uses PCIe 5.0 x16, while the HD 8950M is limited to PCIe 3.0 x16. API support differs as well: the RX 9070 XT supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the HD 8950M is limited to DirectX 12 (12_0) and Vulkan 1.2.170. Both support OpenGL 4.6, but the feature-level gap in DirectX is significant for modern titles.

Where Each One Wins

The RX 9070 XT wins in every scenario that stresses modern rendering pipelines. Its 64 RT cores enable hardware ray tracing that the HD 8950M simply cannot perform, making it the clear choice for any workload involving real-time global illumination or reflections. The 16 GB memory capacity is essential for 4K textures and large compute datasets, where the HD 8950M’s 2 GB would exhaust immediately. The RX 9070 XT’s 48.66 TFLOPS of FP32 compute and 644.6 GB/s bandwidth make it suitable for AI inference, scientific simulation, and high-resolution video editing. Its dual-slot design with 2x 8-pin power connectors and 700 W suggested PSU indicates a desktop-class part intended for sustained heavy loads.

The HD 8950M wins in the narrow niche of legacy compatibility and low-power mobile deployment. As an MXM module with a 100 W TDP, it can fit in older laptop chassis where the RX 9070 XT’s 304 W TDP would be impossible. Its GCN 2.0 architecture supports DirectX 12 (12_0), which means it can run some modern titles at low settings, though without the feature set of 12_2. The HD 8950M’s 2 GB GDDR5 memory and 88.00 GB/s bandwidth are sufficient for 1080p gaming from the 2013-2015 era, but will bottleneck on any recent release. The 768 shading units and 1.651 TFLOPS are adequate for basic compute tasks like OpenCL acceleration in older applications, but the 17.20 GPixel/s pixel rate limits fill-rate-bound scenarios.

In practice, the RX 9070 XT is for users who need current-generation performance, while the HD 8950M serves as a legacy part for systems where power and physical space are constrained. The HD 8950M’s production status is "End-of-life," while the RX 9070 XT is "Active," confirming that the older card is no longer a viable new purchase. The RX 9070 XT’s release date of 2025-03-05 versus the HD 8950M’s 2013-05-13 shows a 12-year gap, and the HD 8950M’s successor is listed as "Gem System," indicating it was replaced long ago within the Solar System generation.

Specification Differences

The following specifications differ between the two GPUs, with no shared values except for manufacturer (AMD) and OpenGL version (4.6).

| Specification | AMD Radeon RX 9070 XT | AMD Radeon HD 8950M |

|---|---|---|

| Architecture | RDNA 4.0 | GCN 2.0 |

| Process Node | 4 nm | 28 nm |

| Transistors | 53,900 million | 2,080 million |

| Die Size | 357 mm² | 160 mm² |

| Transistor Density | 151.0M / mm² | 13.0M / mm² |

| Memory Size | 16 GB | 2 GB |

| Memory Type | GDDR6 | GDDR5 |

| Memory Bus Width | 256 bit | 128 bit |

| Memory Bandwidth | 644.6 GB/s | 88.00 GB/s |

| Shading Units | 4096 | 768 |

| TMUs | 256 | 48 |

| ROPs | 128 | 16 |

| RT Cores | 64 | None |

| Pixel Rate | 380.2 GPixel/s | 17.20 GPixel/s |

| Texture Rate | 760.3 GTexel/s | 51.60 GTexel/s |

| FP32 Compute | 48.66 TFLOPS | 1.651 TFLOPS |

| TDP | 304 W | 100 W |

| Slot Width | Dual-slot | MXM Module |

| Power Connectors | 2x 8-pin | None |

| Bus Interface | PCIe 5.0 x16 | PCIe 3.0 x16 |

| Display Outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1a | Portable Device Dependent |

| DirectX Support | 12 Ultimate (12_2) | 12 (12_0) |

| Vulkan Support | 1.4 | 1.2.170 |

| Production Status | Active | End-of-life |

| Release Date | 2025-03-05 | 2013-05-13 |

| Predecessor | Navi III | London |

| Successor | None | Gem System |

| Launch MSRP | 599 USD | None |

The RX 9070 XT has a base clock of 1660 MHz, boost clock of 2970 MHz, and game clock of 2400 MHz, while the HD 8950M has no base, boost, or game clock listed, only a memory clock of 1375 MHz (5.5 Gbps effective). The RX 9070 XT’s memory clock is 2518 MHz (20.1 Gbps effective). The RX 9070 XT also supports FP16 at 1:1 ratio with FP32, while the HD 8950M has no FP16 data. These differences are not incremental; they represent a complete redesign of the GPU stack.

FAQ

Q: Which GPU has higher raw compute performance?

A: The AMD Radeon RX 9070 XT delivers 48.66 TFLOPS of FP32 compute, compared to the HD 8950M’s 1.651 TFLOPS, a 29.5x advantage for the newer card.

Q: How do the two compare in the shared Geekbench Vulkan test?

A: The RX 9070 XT scores 65879 versus 12979 for the HD 8950M, a 407.6% delta in favor of the RX 9070 XT, showing a massive gap in modern API efficiency.

Q: What is the memory bandwidth difference?

A: The RX 9070 XT has 644.6 GB/s of bandwidth from 16 GB of GDDR6 on a 256-bit bus, while the HD 8950M has 88.00 GB/s from 2 GB of GDDR5 on a 128-bit bus, a 7.3x difference.

Q: Does the HD 8950M support hardware ray tracing?

A: No, the HD 8950M has no RT cores listed, while the RX 9070 XT includes 64 RT cores, making ray tracing exclusive to the newer card.

Q: What are the production statuses of these GPUs?

A: The RX 9070 XT is listed as "Active" with a release date of 2025-03-05, while the HD 8950M is "End-of-life" with a release date of 2013-05-13.

Q: How close are their average benchmark scores?

A: The RX 9070 XT averages 13543, and the HD 8950M averages 13376, a 1.2% difference. However, this is skewed because the HD 8950M only has two benchmark entries, both in Geekbench, while the RX 9070 XT has ten across various suites including 3DMark and PassMark.

DETAILED SPECIFICATIONS

SPECIFICATION
HD 8950M
RX 9070 XT
Core Specs
Shading Units
768
4,096 +433.3%
Shaders
768
4,096 +433.3%
TMUs
48
256 +433.3%
ROPs
16
128 +700.0%
Compute Units
12
64 +433.3%
Clocks
Base Clock
—
1660 MHz
Boost Clock
—
2970 MHz
GPU Clock
1075 MHz
—
Game Clock
—
2400 MHz
Memory Clock
1375 MHz 5.5 Gbps effective
2518 MHz 20.1 Gbps effective
Memory
Memory Size
2 GB
16 GB
VRAM (MB)
2,048
16,384 +700.0%
Memory Type
GDDR5
GDDR6
Memory Bus
128 bit
256 bit
Bandwidth
88.00 GB/s
644.6 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
256 KB
8 MB
L3 Cache
—
64 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
17.20 GPixel/s
380.2 GPixel/s
Texture Rate
51.60 GTexel/s
760.3 GTexel/s
FP32 (TFLOPS)
1.651 TFLOPS
48.66 TFLOPS
FP64 (TFLOPS)
103.2 GFLOPS (1:16)
1.521 TFLOPS (1:32)
FP16 (TFLOPS)
—
48.66 TFLOPS (1:1)
AI/RT
RT Cores
—
64
Matrix Cores
—
128
Power
TDP
100 W
304 W
TDP (W)
100
304 +204.0%
Suggested PSU
—
700 W
Power Connectors
—
2x 8-pin
Architecture
Architecture
GCN 2.0
RDNA 4.0
GPU Name
Saturn
Navi 48
Generation
Solar System (HD 8900M)
Navi IV (RX 9000)
Process Size
28 nm
4 nm
Transistors
2,080 million
53,900 million
Die Size
160 mm²
357 mm²
Foundry
TSMC
TSMC
Density
13.0M / mm²
151.0M / mm²
API Support
DirectX
12 (12_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1
2.2
Shader Model
6.5
6.9
Physical
Slot Width
MXM Module
Dual-slot
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1a
Bus Interface
PCIe 3.0 x16
PCIe 5.0 x16
Other
Launch Price
—
599 USD
Production
End-of-life
Active
Predecessor
London
Navi III
Successor
Gem System
—
View Radeon HD 8950M Details View Radeon RX 9070 XT Details