AMD Radeon 840M vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

AMD
RADEON

AMD Radeon 840M

CORE STATE Krackan Point
VRAM System Shared
CLOCK SPEED 2900 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
142
passmark_directx_11
N/A
220
passmark_directx_12
N/A
82
passmark_directx_9
N/A
228
passmark_g2d
N/A
1,169
passmark_g3d
N/A
21,981
passmark_gpu_compute
N/A
11,365

Analysis: AMD Radeon 840M vs NVIDIA GeForce RTX 5060 Ti 8 GB

Where Each One Wins

The recorded data splits these two GPUs into completely different performance classes. The AMD Radeon 840M has no benchmark entries in the database, so its wins column is zero. The NVIDIA GeForce RTX 5060 Ti 8 GB carries eight benchmark scores, and every one of them is a win for the NVIDIA part. That is not a close contest; it is a category gap.

The RTX 5060 Ti 8 GB dominates in synthetic workloads that stress raw graphics throughput. In PassMark G3D, the NVIDIA card scores 21,981 points. That is the single largest recorded score for this GPU and reflects its ability to handle modern DirectX and OpenGL rendering paths. The PassMark GPU Compute score of 11,365 shows strong general-purpose compute performance as well. The 3DMark Steel Nomad DX12 result of 4,019 points places it in a range where it can address modern game workloads at high settings, though the database does not include any game-specific tests.

The 840M, by contrast, has no recorded benchmark scores at all. Its percentile ranking against all GPUs is 50, which places it exactly at the midpoint of the database distribution, but that percentile is calculated without any measured benchmark data. The practical interpretation is that the 840M is an integrated graphics processor designed for light duties, while the RTX 5060 Ti is a discrete card built for sustained rendering workloads. The wins are not distributed between the two; they all belong to the NVIDIA product.

Architecture Differences

The architectural gap between these two parts is substantial. The AMD Radeon 840M uses the RDNA 3.5 architecture on a 4 nm TSMC process, built as part of the Krackan Point chip in the Navi III IGP generation. The NVIDIA GeForce RTX 5060 Ti 8 GB uses the Blackwell 2.0 architecture on a 5 nm TSMC process, built on the GB206 chip in the GeForce 50 series. Both are manufactured by TSMC, but the node difference is real: AMD uses the smaller 4 nm process, NVIDIA uses 5 nm.

The transistor counts tell a different story. The RTX 5060 Ti packs 21,900 million transistors into a 181 mm² die, giving a transistor density of 121.0M per mm². The 840M lists its transistor count and die size as unknown, so no direct density comparison is possible. What the data does show is that NVIDIA has invested heavily in a large, complex die, while AMD has integrated its GPU into a mobile chip with unspecified dimensions.

Core counts are wildly different. The 840M has 256 shading units, 16 texture mapping units, 8 ROPs, and 4 ray tracing cores. The RTX 5060 Ti has 4,608 shading units, 144 TMUs, 48 ROPs, and 36 ray tracing cores. NVIDIA also includes 144 tensor cores; the 840M lists no tensor cores at all. The shading unit count alone is 18 times higher on the NVIDIA part.

Clock behavior differs as well. The 840M has a base clock of 400 MHz and a boost clock of 2,900 MHz, which is a very wide boost range typical of power-limited integrated graphics. The RTX 5060 Ti runs a base clock of 2,407 MHz and boosts to 2,572 MHz, a much narrower range because it is not constrained to the same power envelope. Memory configurations are fundamentally different: the 840M uses system shared memory with system dependent bandwidth, while the RTX 5060 Ti has 8 GB of dedicated GDDR7 on a 128-bit bus with 448.0 GB/s of bandwidth.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API-level feature support is identical. The bus interface differs: the 840M uses PCIe 4.0 x8, the RTX 5060 Ti uses PCIe 5.0 x8. Power requirements are also far apart, with the 840M rated at 15 W and the RTX 5060 Ti at 180 W.

The Verdict

The data supports a straightforward conclusion. The RTX 5060 Ti 8 GB is the only one of these two GPUs with any recorded benchmark performance, and its scores are strong across all tested workloads. The 840M has no benchmark entries, leaving its performance unmeasured in the database. A user who needs a GPU for 3D rendering, compute workloads, or modern game APIs should select the RTX 5060 Ti based solely on the available evidence. A user who needs an integrated GPU for a low-power mobile system would consider the 840M, but the database provides no performance data to validate that choice.

The RTX 5060 Ti also has a clear specification advantage in every measurable category: shading units, TMUs, ROPs, ray tracing cores, tensor cores, memory capacity, memory bandwidth, and pixel and texture fill rates. The 840M does have a smaller process node at 4 nm versus 5 nm, and a lower power draw at 15 W versus 180 W, but those advantages do not translate into any recorded performance wins. The RTX 5060 Ti is the only part with measured results, and those results place it well ahead.

FAQ

Q: Which GPU has a higher benchmark score?

A: The RTX 5060 Ti 8 GB has all eight recorded benchmark scores. Its highest is 21,981 in PassMark G3D, and its average benchmark score is 4,901. The Radeon 840M has no benchmark scores and an average benchmark score of 0.

Q: How does the RTX 5060 Ti compare to its nearest rivals?

A: The RTX 5060 Ti has an average score of 4,901. Its nearest rival is the AMD FirePro W5130M at 4,904, which is 0.1% behind. The NVIDIA GeForce GTS 450 scores 4,893, which is 0.2% ahead. The AMD Radeon R7 M265 and R7 M360 score 4,929 and 4,931 respectively, both 0.6% behind the RTX 5060 Ti.

Q: What memory does each GPU use?

A: The RTX 5060 Ti has 8 GB of GDDR7 memory on a 128-bit bus with 448.0 GB/s bandwidth. The Radeon 840M uses system shared memory, with system dependent bandwidth.

Q: Do both GPUs support the same graphics APIs?

A: Yes. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: What is the power consumption difference?

A: The Radeon 840M is rated at 15 W and has no power connectors. The RTX 5060 Ti is rated at 180 W and uses a single 8-pin power connector, with a suggested power supply of 450 W.

Q: Which GPU has more ray tracing cores?

A: The RTX 5060 Ti has 36 ray tracing cores. The Radeon 840M has 4 ray tracing cores.

Head-to-Head Benchmarks

The database contains no shared head-to-head benchmark entries between these two GPUs. That means a direct per-test comparison is impossible. However, the RTX 5060 Ti has eight individual benchmark scores that can be analyzed on their own, and the 840M has none. The absence of data for the 840M is itself the most significant finding.

The largest recorded win for the RTX 5060 Ti comes from PassMark G3D, where it scores 21,981. This test measures general 3D graphics performance and is a strong indicator of overall rendering capability. The same GPU scores 11,365 in PassMark GPU Compute, showing that its compute throughput is roughly half of its 3D performance in that test suite. The 3DMark Steel Nomad DX12 score of 4,019 indicates solid performance in a modern DirectX 12 workload.

The PassMark legacy DirectX tests show a different pattern. The DirectX 9 score is 228, the DirectX 10 score is 142, the DirectX 11 score is 220, and the DirectX 12 score is 82. These scores are much lower than the G3D result because they test specific API paths rather than overall performance. The 2D graphics score is 1,169, which is separate from the 3D results.

The average benchmark score of 4,901 for the RTX 5060 Ti is pulled down by these API-specific tests. The GPU's percentile ranking against all GPUs is 29, meaning it sits below the majority of the database entries. This is an important context: while the RTX 5060 Ti is far ahead of the 840M, its standing in the broader database is mid-to-low, and its nearest rivals are older mobile and desktop parts like the AMD FirePro W5130M and the NVIDIA GeForce GTS 450.

Specification Differences

The two GPUs differ in nearly every specification field that the database records. The RTX 5060 Ti has 4,608 shading units versus 256 on the 840M, 144 TMUs versus 16, and 48 ROPs versus 8. Ray tracing cores number 36 versus 4, and tensor cores exist only on the NVIDIA part at 144. The 840M has no tensor cores.

Fill rates follow the same pattern. The RTX 5060 Ti delivers a pixel rate of 123.5 GPixel/s and a texture rate of 370.4 GTexel/s. The 840M delivers 23.20 GPixel/s and 46.40 GTexel/s. Floating point performance is also lopsided: the RTX 5060 Ti reaches 23.70 TFLOPS for both FP32 and FP16, while the 840M reaches 1,484.8 GFLOPS for both, which is 1.48 TFLOPS.

Process technology favors AMD at 4 nm versus 5 nm for NVIDIA, but NVIDIA has the larger die at 181 mm² with 21,900 million transistors. The 840M lists unknown values for both. Clock speeds show the 840M with a 400 MHz base and 2,900 MHz boost, while the RTX 5060 Ti has a 2,407 MHz base and 2,572 MHz boost. The 840M has a wider boost range and a much lower base clock, consistent with its integrated design.

Memory is a complete divergence. The 840M uses system shared memory with no dedicated capacity, type, or bus width. The RTX 5060 Ti has 8 GB of GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth. The physical format differs as well: the 840M is an IGP with no slot width, while the RTX 5060 Ti is a dual-slot card measuring 241 mm in length, 111 mm in height, and 40 mm in width, requiring a single 8-pin power connector. The bus interface is PCIe 4.0 x8 for AMD and PCIe 5.0 x8 for NVIDIA. Display outputs on the 840M are portable device dependent, while the RTX 5060 Ti offers 1x HDMI 2.1b and 3x DisplayPort 2.1b.

DETAILED SPECIFICATIONS

SPECIFICATION
840M
RTX 5060 Ti 8 GB
Core Specs
Shading Units
256
4,608 +1700.0%
Shaders
256
4,608 +1700.0%
TMUs
16
144 +800.0%
ROPs
8
48 +500.0%
Compute Units
4
—
SM Count
—
36
Clocks
Base Clock
400 MHz
2407 MHz
Boost Clock
2900 MHz
2572 MHz
Memory Clock
System Shared
1750 MHz 28 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR7
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
448.0 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
1024 KB
32 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
23.20 GPixel/s
123.5 GPixel/s
Texture Rate
46.40 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
1,484.8 GFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
92.80 GFLOPS (1:16)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
1,484.8 GFLOPS (1:1)
23.70 TFLOPS (1:1)
AI/RT
RT Cores
4
36 +800.0%
Tensor Cores
—
144
Power
TDP
15 W
180 W
TDP (W)
15
180 +1100.0%
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
RDNA 3.5
Blackwell 2.0
GPU Name
Krackan Point
GB206
Generation
Navi III IGP (Strix Point Mobile)
GeForce 50
Process Size
4 nm
5 nm
Transistors
unknown
21,900 million
Die Size
unknown
181 mm²
Foundry
TSMC
TSMC
Density
—
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
12.0
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x8
Other
Launch Price
—
379 USD
Production
Active
Active
Predecessor
Navi II IGP
GeForce 40
Successor
—
GeForce 60
View Radeon 840M Details View GeForce RTX 5060 Ti 8 GB Details