AMD Radeon 840M vs NVIDIA GeForce RTX 5060 Ti 16 GB Comparison
AMD Radeon 840M
GeForce RTX 5060 Ti 16 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon 840M vs NVIDIA GeForce RTX 5060 Ti 16 GB
The Verdict
The recorded data draws a sharp distinction between these two processors. The AMD Radeon 840M is an integrated graphics processor (IGP) built for low-power mobility, while the NVIDIA GeForce RTX 5060 Ti 16 GB is a dual-slot discrete expansion card. The database shows the RTX 5060 Ti holding the 29th percentile among all GPUs, whereas the 840M sits at the 50th percentile; this percentile gap reflects that half of all recorded GPUs are slower than the integrated part, yet the discrete card still outperforms roughly 71 percent of the field. The 840M is the only choice for a system that relies on shared system memory and a 15 W power envelope, since it requires no power connector and uses whatever memory the host provides. The RTX 5060 Ti, by contrast, needs a 180 W budget, a 450 W suggested PSU, and a single 8-pin connector, so it belongs in a desktop build with dedicated power delivery. Users with a PCIe 5.0 slot and room for a 241 mm card get 16 GB of GDDR7, 448.0 GB/s of bandwidth, and 4,608 shading units; users constrained to an IGP form factor get 256 shading units and system-dependent bandwidth. The data does not support treating these as alternatives: they occupy different physical and power classes, and the benchmark results confirm the discrete part dominates in raw throughput.
Architecture Differences
The two parts come from different foundries and design generations. The AMD Radeon 840M uses a 4 nm TSMC process and RDNA 3.5 architecture, built on the Krackan Point chip within the Navi III IGP (Strix Point Mobile) generation. Its predecessor is the Navi II IGP. The NVIDIA GeForce RTX 5060 Ti 16 GB uses a 5 nm TSMC process and Blackwell 2.0 architecture, built on the GB206 chip within the GeForce 50 generation. Its predecessor is GeForce 40 and its successor is GeForce 60. Transistor counts differ sharply: the database lists the RTX 5060 Ti at 21,900 million transistors on a 181 mm² die, a transistor density of 121.0M per mm², while the 840M's transistor count and die size are unknown. The 840M integrates 4 ray tracing cores, while the RTX 5060 Ti carries 36. The NVIDIA part also includes 144 tensor cores, a feature class entirely absent from the AMD entry. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API coverage is identical even though the underlying hardware differs. The bus interface separates them further: the 840M uses PCIe 4.0 x8, while the RTX 5060 Ti uses PCIe 5.0 x8. The AMD part's 400 MHz base clock rising to 2900 MHz boost contrasts with the NVIDIA part's 2407 MHz base and 2572 MHz boost; the lower base clock on the IGP reflects its power-conscious design. The RTX 5060 Ti's memory runs at 1750 MHz with 28 Gbps effective, while the 840M's memory clock is listed as system shared and its bandwidth is system dependent.
Head-to-Head Benchmarks
The factorial difference in compute resources shows up across every recorded metric. The RTX 5060 Ti produces 23.70 TFLOPS of FP32 and FP16 (1:1), while the 840M produces 1,484.8 GFLOPS in both. That places the discrete card at roughly 16 times the FP32 throughput of the integrated part. Pixel rate follows the same pattern: 123.5 GPixel/s for the RTX 5060 Ti versus 23.20 GPixel/s for the 840M. Texture rate is 370.4 GTexel/s versus 46.40 GTexel/s. Shading units number 4,608 against 256, TMUs 144 against 16, and ROPs 48 against 8. The RTX 5060 Ti carries 16 GB of GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth; the 840M's memory size, type, and bus width are all listed as system shared, with bandwidth dependent on the host system. In the recorded benchmark suite, the RTX 5060 Ti scores 4,019 in 3DMark Steel Nomad DX12, 22,618 in PassMark G3D, and 11,224 in PassMark GPU Compute. Its PassMark DX11 score is 219, DX10 is 144, DX9 is 238, and DX12 is 89; the G2D score is 1,206. The 840M has no recorded benchmark scores in the database, and its average benchmark score is 0, so the comparison rests on specification deltas rather than direct measurements. The nearest rivals to the RTX 5060 Ti in the database are the NVIDIA Quadro 4000 at 4,979 (0.2 percent slower), the AMD Radeon R7 Graphics at 4,998 (0.6 percent slower), the AMD Radeon R7 M360 at 4,931 (0.8 percent faster), and the AMD Radeon R7 M265 at 4,929 (0.8 percent faster). These deltas are small, indicating the RTX 5060 Ti's average score of 4,970 sits in a tightly clustered group. The 840M has no nearest rivals listed, so its relative standing can only be inferred from its 50th percentile placement.
Specification Differences
The two parts differ in nearly every recorded field. Process node: 4 nm for the 840M, 5 nm for the RTX 5060 Ti, both from TSMC. Transistors: unknown for the 840M, 21,900 million for the RTX 5060 Ti. Die size: unknown versus 181 mm². Transistor density: not listed versus 121.0M per mm². Base clock: 400 MHz versus 2407 MHz. Boost clock: 2900 MHz versus 2572 MHz. Memory size: system shared versus 16 GB. Memory type: system shared versus GDDR7. Bus width: system shared versus 128 bit. Bandwidth: system dependent versus 448.0 GB/s. Shading units: 256 versus 4,608. TMUs: 16 versus 144. ROPs: 8 versus 48. RT cores: 4 versus 36. Tensor cores: not listed versus 144. Pixel rate: 23.20 GPixel/s versus 123.5 GPixel/s. Texture rate: 46.40 GTexel/s versus 370.4 GTexel/s. FP32: 1,484.8 GFLOPS versus 23.70 TFLOPS. FP16: 1,484.8 GFLOPS (1:1) versus 23.70 TFLOPS (1:1). TDP: 15 W versus 180 W. Slot width: IGP versus dual-slot. Power connectors: none versus 1x 8-pin. Suggested PSU: not listed versus 450 W. Bus interface: PCIe 4.0 x8 versus PCIe 5.0 x8. Display outputs: portable device dependent versus 1x HDMI 2.1b and 3x DisplayPort 2.1b. Dimensions: not listed versus 241 mm by 111 mm by 40 mm. Release date: 2025-02-28 versus 2025-04-15. The RTX 5060 Ti has a launch MSRP of 429 USD. Production status is active for both. The 840M's series is null, while the RTX 5060 Ti belongs to the GeForce 50-series.
FAQ
Q: Which GPU has more ray tracing cores?
A: The NVIDIA GeForce RTX 5060 Ti 16 GB has 36 RT cores, while the AMD Radeon 840M has 4.
Q: What is the memory bandwidth difference?
A: The RTX 5060 Ti 16 GB provides 448.0 GB/s over a 128-bit GDDR7 interface, while the 840M's bandwidth is listed as system dependent with system shared memory.
Q: How do their power requirements compare?
A: The 840M has a 15 W TDP and no power connector, while the RTX 5060 Ti has a 180 W TDP, a 1x 8-pin connector, and a 450 W suggested PSU.
Q: Do both support the same APIs?
A: Yes, both list DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: What is the FP32 throughput gap?
A: The RTX 5060 Ti delivers 23.70 TFLOPS, while the 840M delivers 1,484.8 GFLOPS; the discrete card has roughly 16 times the FP32 compute.
Q: What percentile does each hold in the database?
A: The 840M sits at the 50th percentile among all GPUs, while the RTX 5060 Ti sits at the 29th percentile, meaning the discrete card outperforms most of the field.
Q: When was each released?
A: The 840M released on 2025-02-28, and the RTX 5060 Ti released on 2025-04-15.
Where Each One Wins
The RTX 5060 Ti wins every recorded performance domain. It has 18 times the shading units, 9 times the TMUs, 6 times the ROPs, and 9 times the RT cores. Its 16 GB of GDDR7 with 448.0 GB/s of bandwidth removes any dependence on host memory configuration, whereas the 840M's bandwidth is explicitly system dependent. The discrete card's 4,019 score in 3DMark Steel Nomad DX12 and 22,618 in PassMark G3D represent the only concrete measured results in this comparison, and they align with its higher pixel rate, texture rate, and FP32 throughput. The RTX 5060 Ti also adds 144 tensor cores, a capability absent from the 840M, and its 23.70 TFLOPS FP16 rate matches its FP32 rate, suggesting balanced compute for workloads that use either precision. The 840M wins only in power efficiency and physical integration: a 15 W TDP, no power connector, and an IGP slot width mean it can fit into a portable device with no add-in card space. Its 50th percentile placement, higher than the RTX 5060 Ti's 29th percentile, indicates that many GPUs in the database are slower than this IGP, so it is not a weak part in absolute terms. The RTX 5060 Ti's nearest rivals cluster tightly around its 4,970 average score, with deltas under one percent, so its performance class is well established. The 840M's lack of recorded benchmarks and nearest rivals leaves its measured standing open, but its specification ceiling is fixed by 256 shading units and shared memory. For any workload that fits in a desktop chassis with a dedicated PSU, the RTX 5060 Ti is the clear performer. For a system that must run from system memory and stay within 15 W, the 840M is the only option the data supports. The two do not compete for the same socket, power budget, or memory architecture, so the choice is determined by form factor and power delivery before any benchmark result is consulted.