AMD Radeon 840M vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison

AMD
RADEON

AMD Radeon 840M

CORE STATE Krackan Point
VRAM System Shared
CLOCK SPEED 2900 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: AMD Radeon 840M vs NVIDIA GeForce RTX 4070 Ti SUPER AD102

Head-to-Head Benchmarks

The recorded data shows a single benchmark result for the NVIDIA GeForce RTX 4070 Ti SUPER AD102: a 3DMark Steel Nomad DX12 score of 6,269.5. The AMD Radeon 840M has no benchmark entries in the database, and the head-to-head benchmark table is empty. This means no direct comparison scores exist between the two parts. The RTX 4070 Ti SUPER AD102 carries an average benchmark score of 6,270, while the Radeon 840M records an average score of zero. The wins tally reflects this: the RTX 4070 Ti SUPER AD102 holds one win, and the Radeon 840M holds zero.

The RTX 4070 Ti SUPER AD102 sits at the 36th percentile among all GPUs in the database. Its nearest rivals in the recorded data are the NVIDIA GeForce RTX 5070 Ti SUPER with an identical average score of 6,270 and a delta of 0 percent, the NVIDIA Quadro K620 at 6,282 with a delta of -0.2 percent, the AMD FirePro W600 at 6,223 with a delta of 0.8 percent, and the AMD Radeon R7 M350 at 6,327 with a delta of -0.9 percent. Those delta values indicate that the RTX 4070 Ti SUPER AD102 trails the Quadro K620 by 0.2 percent, leads the FirePro W600 by 0.8 percent, and trails the Radeon R7 M350 by 0.9 percent. The RTX 5070 Ti SUPER is effectively a statistical tie. The data shows a narrow competitive band around the 6,270 score, with all four nearest rivals within roughly one percentage point.

For the Radeon 840M, the percentile rank of 50 places it in the middle of the database distribution, but the lack of any benchmark entries means its practical standing cannot be quantified from recorded measurements. The RTX 4070 Ti SUPER AD102, by contrast, has a concrete score that places it below the median percentile despite its high absolute performance. That combination, a strong raw score with a lower percentile, reflects the distribution of scores across all GPUs in the database.

Architecture Differences

The two parts come from fundamentally different design philosophies. The AMD Radeon 840M is an integrated graphics processor built on the Krackan Point chip using RDNA 3.5 architecture, part of the Navi III IGP generation for Strix Point Mobile. It is fabricated on a 4 nm process at TSMC. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 uses the AD102 chip with Ada Lovelace architecture in the GeForce 40 series, built on a 5 nm process at TSMC. The RTX 4070 Ti SUPER AD102 has 76,300 million transistors on a 609 mm² die, with a transistor density of 125.3 million per square millimeter. The Radeon 840M lists unknown transistor count, die size, and density.

The compute resources diverge sharply. The Radeon 840M has 256 shading units, 16 texture mapping units, 8 raster output units, and 4 ray tracing cores. The RTX 4070 Ti SUPER AD102 has 8,448 shading units, 264 TMUs, 96 ROPs, and 66 ray tracing cores. The NVIDIA part also includes 264 tensor cores, while the AMD part has no tensor core field. Clock behavior differs as well: the Radeon 840M runs at a 400 MHz base and a 2,900 MHz boost, while the RTX 4070 Ti SUPER AD102 runs at a 2,340 MHz base and a 2,610 MHz boost. The AMD part boosts higher, but the NVIDIA part has far more execution units.

Memory architecture is a major differentiator. The Radeon 840M uses system shared memory for size, type, bus width, and bandwidth, with bandwidth described as system dependent. The RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X on a 256 bit bus with 672.3 GB/s bandwidth and a memory clock of 1,313 MHz or 21 Gbps effective. The Radeon 840M has a 15 W TDP and is an IGP with no power connectors, while the RTX 4070 Ti SUPER AD102 has a 285 W TDP, a triple-slot cooler, a single 16-pin power connector, and a suggested PSU of 600 W.

Performance rates reflect the scale difference. The Radeon 840M delivers 23.20 GPixel/s pixel rate, 46.40 GTexel/s texture rate, and 1,484.8 GFLOPS FP32. The RTX 4070 Ti SUPER AD102 delivers 250.6 GPixel/s, 689.0 GTexel/s, and 44.10 TFLOPS FP32. Both parts support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The bus interface differs: PCIe 4.0 x8 for the Radeon 840M versus PCIe 4.0 x16 for the RTX 4070 Ti SUPER AD102. Display outputs for the Radeon 840M are portable device dependent, while the RTX 4070 Ti SUPER AD102 has 1x HDMI 2.1 and 3x DisplayPort 1.4a.

FAQ

Q: Which GPU has a higher benchmark score in the database?

A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has a recorded 3DMark Steel Nomad DX12 score of 6,269.5 and an average benchmark score of 6,270. The AMD Radeon 840M has no benchmark entries and an average score of zero.

Q: How does the RTX 4070 Ti SUPER AD102 compare to its nearest rivals?

A: The recorded data shows it matches the NVIDIA GeForce RTX 5070 Ti SUPER at 6,270 with a 0 percent delta. It trails the NVIDIA Quadro K620 by 0.2 percent, leads the AMD FirePro W600 by 0.8 percent, and trails the AMD Radeon R7 M350 by 0.9 percent.

Q: What is the transistor count difference between the two GPUs?

A: The RTX 4070 Ti SUPER AD102 has 76,300 million transistors on a 609 mm² die. The Radeon 840M has an unknown transistor count and die size in the database.

Q: Do both GPUs support the same graphics APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: What memory configurations do the two GPUs use?

A: The Radeon 840M uses system shared memory with system dependent bandwidth. The RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X on a 256 bit bus with 672.3 GB/s bandwidth.

Q: What are the power requirements for each GPU?

A: The Radeon 840M has a 15 W TDP and requires no power connectors. The RTX 4070 Ti SUPER AD102 has a 285 W TDP, uses a single 16-pin power connector, and has a suggested PSU of 600 W.

Specification Differences

| Specification | AMD Radeon 840M | NVIDIA GeForce RTX 4070 Ti SUPER AD102 |

|---|---|---|

| Architecture | RDNA 3.5 | Ada Lovelace |

| Process Node | 4 nm | 5 nm |

| Transistors | Unknown | 76,300 million |

| Die Size | Unknown | 609 mm² |

| Transistor Density | Not listed | 125.3M / mm² |

| Base Clock | 400 MHz | 2,340 MHz |

| Boost Clock | 2,900 MHz | 2,610 MHz |

| Memory Size | System Shared | 16 GB |

| Memory Type | System Shared | GDDR6X |

| Memory Bus Width | System Shared | 256 bit |

| Memory Bandwidth | System Dependent | 672.3 GB/s |

| Shading Units | 256 | 8,448 |

| TMUs | 16 | 264 |

| ROPs | 8 | 96 |

| Ray Tracing Cores | 4 | 66 |

| Tensor Cores | Not listed | 264 |

| Pixel Rate | 23.20 GPixel/s | 250.6 GPixel/s |

| Texture Rate | 46.40 GTexel/s | 689.0 GTexel/s |

| FP32 Performance | 1,484.8 GFLOPS | 44.10 TFLOPS |

| TDP | 15 W | 285 W |

| Slot Width | IGP | Triple-slot |

| Power Connectors | None | 1x 16-pin |

| Suggested PSU | Not listed | 600 W |

| Bus Interface | PCIe 4.0 x8 | PCIe 4.0 x16 |

| Display Outputs | Portable Device Dependent | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| Production Status | Active | End-of-life |

| Release Date | 2025-02-28 | 2024-06-09 |

| Predecessor | Navi II IGP | GeForce 30 |

| Successor | Not listed | GeForce 50 |

| Launch MSRP | Not listed | 799 USD |

The Verdict

The data presents a clear hierarchy. The RTX 4070 Ti SUPER AD102 is a discrete, high-power add-in board with a massive compute advantage: 44.10 TFLOPS FP32 versus 1,484.8 GFLOPS, 8,448 shading units versus 256, and 66 ray tracing cores versus 4. Its 16 GB GDDR6X memory with 672.3 GB/s bandwidth stands against the Radeon 840M's system shared, system dependent memory. The RTX 4070 Ti SUPER AD102 also has the only recorded benchmark score, a 3DMark Steel Nomad DX12 result of 6,269.5.

The Radeon 840M, however, is an integrated processor with a 15 W TDP, no power connectors, and a portable device dependent display output. It is designed for mobile systems where the RTX 4070 Ti SUPER AD102's triple-slot cooler, 285 W TDP, and 600 W suggested PSU would be impossible. The Radeon 840M's 4 nm process is smaller than the RTX 4070 Ti SUPER AD102's 5 nm process, and its boost clock of 2,900 MHz exceeds the NVIDIA part's 2,610 MHz boost. Those advantages do not offset the raw execution resource difference.

The percentile data adds context. The Radeon 840M sits at the 50th percentile among all GPUs, while the RTX 4070 Ti SUPER AD102 sits at the 36th percentile. That lower percentile for the NVIDIA part reflects the fact that its nearest rivals, all within one percentage point of its score, include older and less powerful cards like the AMD FirePro W600 and NVIDIA Quadro K620. The RTX 4070 Ti SUPER AD102's score places it in a dense region of the database distribution, not at the top.

Where Each One Wins

The RTX 4070 Ti SUPER AD102 wins in every measurable compute category. It delivers 10.6 times the pixel rate, 14.8 times the texture rate, and 29.7 times the FP32 throughput of the Radeon 840M. It has 33 times the shading units, 16.5 times the TMUs, 12 times the ROPs, and 16.5 times the ray tracing cores. Its dedicated 16 GB GDDR6X memory with 672.3 GB/s bandwidth provides a fixed memory subsystem rather than one dependent on system configuration. The single recorded benchmark score belongs to this card.

The Radeon 840M wins in efficiency and integration. Its 15 W TDP is 270 W lower than the RTX 4070 Ti SUPER AD102's 285 W TDP. It requires no power connectors, occupies no slot width, and fits in a portable device. Its 4 nm process node is one generation ahead of the 5 nm node used by the NVIDIA part. Its 2,900 MHz boost clock is 290 MHz higher than the RTX 4070 Ti SUPER AD102's 2,610 MHz. The Radeon 840M also has an active production status and a later release date of 2025-02-28 versus the RTX 4070 Ti SUPER AD102's 2024-06-09 release and end-of-life status.

The use-case split follows the data. The RTX 4070 Ti SUPER AD102 suits any system that can accommodate a triple-slot, 285 W card with a 600 W PSU, where the 44.10 TFLOPS FP32 and 66 ray tracing cores can be fully utilized. The Radeon 840M suits portable devices where the 15 W TDP and shared memory are the only viable options, and where the 1,484.8 GFLOPS FP32 and 4 ray tracing cores are sufficient for the target workload. The RTX 4070 Ti SUPER AD102 is end-of-life, while the Radeon 840M remains active, but the recorded data shows no benchmark overlap to suggest the integrated part competes with the discrete card in raw performance.

DETAILED SPECIFICATIONS

SPECIFICATION
840M
RTX 4070 Ti SUPER AD102
Core Specs
Shading Units
256
8,448 +3200.0%
Shaders
256
8,448 +3200.0%
TMUs
16
264 +1550.0%
ROPs
8
96 +1100.0%
Compute Units
4
—
SM Count
—
66
Clocks
Base Clock
400 MHz
2340 MHz
Boost Clock
2900 MHz
2610 MHz
Memory Clock
System Shared
1313 MHz 21 Gbps effective
Memory
Memory Size
System Shared
16 GB
VRAM (MB)
—
16,384
Memory Type
System Shared
GDDR6X
Memory Bus
System Shared
256 bit
Bandwidth
System Dependent
672.3 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
1024 KB
48 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
23.20 GPixel/s
250.6 GPixel/s
Texture Rate
46.40 GTexel/s
689.0 GTexel/s
FP32 (TFLOPS)
1,484.8 GFLOPS
44.10 TFLOPS
FP64 (TFLOPS)
92.80 GFLOPS (1:16)
689.0 GFLOPS (1:64)
FP16 (TFLOPS)
1,484.8 GFLOPS (1:1)
44.10 TFLOPS (1:1)
AI/RT
RT Cores
4
66 +1550.0%
Tensor Cores
—
264
Power
TDP
15 W
285 W
TDP (W)
15
285 +1800.0%
Suggested PSU
—
600 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.5
Ada Lovelace
GPU Name
Krackan Point
AD102
Generation
Navi III IGP (Strix Point Mobile)
GeForce 40
Process Size
4 nm
5 nm
Transistors
unknown
76,300 million
Die Size
unknown
609 mm²
Foundry
TSMC
TSMC
Density
—
125.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Triple-slot
Length
—
310 mm 12.2 inches
Height
—
140 mm 5.5 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x16
Other
Launch Price
—
799 USD
Production
Active
End-of-life
Predecessor
Navi II IGP
GeForce 30
Successor
—
GeForce 50
View Radeon 840M Details View GeForce RTX 4070 Ti SUPER AD102 Details