AMD Radeon 840M vs NVIDIA GeForce RTX 4070 GDDR6 Comparison
AMD Radeon 840M
GeForce RTX 4070 GDDR6
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon 840M vs NVIDIA GeForce RTX 4070 GDDR6
FAQ
Q: What are the architectural generations of the AMD Radeon 840M and the NVIDIA GeForce RTX 4070 GDDR6?
A: The AMD Radeon 840M is built on the RDNA 3.5 architecture using the Krackan Point chip, part of the Navi III IGP (Strix Point Mobile) generation on a 4 nm TSMC process. The NVIDIA GeForce RTX 4070 GDDR6 uses the Ada Lovelace architecture with the AD104 chip, part of the GeForce 40 generation on a 5 nm TSMC process.
Q: How do the memory configurations differ between these two GPUs?
A: The Radeon 840M uses System Shared memory with a System Shared bus width and bandwidth described as System Dependent. The RTX 4070 GDDR6 has 12 GB of GDDR6 memory on a 192 bit bus with 480.0 GB/s bandwidth and a memory clock of 2500 MHz (20 Gbps effective).
Q: What is the difference in shading unit count?
A: The Radeon 840M has 256 shading units, while the RTX 4070 GDDR6 has 5888 shading units. The RTX 4070 GDDR6 also carries 184 texture mapping units and 64 raster operation pipelines, compared to 16 TMUs and 8 ROPs for the 840M.
Q: Which GPU has a higher boost clock?
A: The Radeon 840M has a boost clock of 2900 MHz, which is higher than the RTX 4070 GDDR6's boost clock of 2475 MHz. However, the RTX 4070 GDDR6 has a much higher base clock at 1920 MHz versus 400 MHz for the 840M.
Q: What are the power requirements for each card?
A: The Radeon 840M has a TDP of 15 W, uses no power connectors, and is an integrated graphics processor (IGP). The RTX 4070 GDDR6 has a TDP of 200 W, uses a single 16-pin power connector, and a suggested PSU of 550 W.
Q: What is the production status and release timeline for both?
A: The Radeon 840M is marked as Active in production and was released on 2025-02-28. The RTX 4070 GDDR6 is marked as End-of-life, was released on 2024-08-19, with the GeForce 30 as its predecessor and GeForce 50 as its successor.
Architecture Differences
The AMD Radeon 840M and NVIDIA GeForce RTX 4070 GDDR6 diverge sharply in their underlying designs. The Radeon 840M is an integrated part built on RDNA 3.5, fabricated on a 4 nm process at TSMC. The RTX 4070 GDDR6 is a discrete dual-slot card using Ada Lovelace, fabricated on a 5 nm process, also at TSMC. The process node difference is small at 4 nm versus 5 nm, but the physical scale of the NVIDIA chip is far larger: the AD104 die measures 294 mm² with 35,800 million transistors and a transistor density of 121.8M per mm². The Radeon 840M's transistor count and die size are listed as unknown, which limits direct comparison of those metrics.
Compute resources differ by an order of magnitude. The Radeon 840M fields 256 shading units, 16 TMUs, and 8 ROPs. The RTX 4070 GDDR6 fields 5888 shading units, 184 TMUs, and 64 ROPs. Ray tracing hardware is also uneven: the 840M has 4 RT cores, while the RTX 4070 GDDR6 has 46 RT cores. The NVIDIA part adds 184 tensor cores, a feature the AMD IGP does not list. These structural differences drive the large gap in raw throughput.
Clock behavior is inverted between the two. The Radeon 840M runs a 400 MHz base clock and boosts to 2900 MHz, a very wide frequency range typical of a mobile IGP. The RTX 4070 GDDR6 starts at 1920 MHz base and boosts to 2475 MHz, a narrower range consistent with a high-power discrete GPU. Despite the 840M's higher boost clock, its much smaller execution width limits absolute performance.
Memory architecture is fundamentally different. The Radeon 840M relies on System Shared memory, with bandwidth described as System Dependent. The RTX 4070 GDDR6 uses 12 GB of dedicated GDDR6 on a 192 bit interface, delivering 480.0 GB/s. The memory clock is 2500 MHz, or 20 Gbps effective. This dedicated high-bandwidth memory is a major advantage for the discrete card in bandwidth-bound workloads.
Power and physical design also separate the two. The Radeon 840M is an IGP with a 15 W TDP, no power connectors, and a PCIe 4.0 x8 bus interface. The RTX 4070 GDDR6 is a dual-slot card with a 200 W TDP, one 16-pin power connector, a suggested PSU of 550 W, and a PCIe 4.0 x16 bus interface. Its physical dimensions are 240 mm in length, 110 mm in height, and 40 mm in width. Display outputs differ as well: the 840M is Portable Device Dependent, while the RTX 4070 GDDR6 provides 1x HDMI 2.1 and 3x DisplayPort 1.4a.
Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API-level feature parity exists even where hardware capabilities diverge.
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark entries for the Radeon 840M versus the RTX 4070 GDDR6. The Radeon 840M has no recorded benchmark scores, an average benchmark score of 0, and no nearest rivals listed. Its percentile versus all GPUs is 50. The RTX 4070 GDDR6, by contrast, has one recorded benchmark result: 3DMark Steel Nomad DX12 with a score of 4334.5, and an average benchmark score of 4335. Its percentile versus all GPUs is 25, which indicates it sits in a lower percentile position in the database despite having a measured score.
The nearest rivals for the RTX 4070 GDDR6 provide context for its measured performance. The Intel Iris Pro Graphics 5200 has an average score of 4360, which is 0.6% higher than the RTX 4070 GDDR6's average score. The AMD FirePro W2100 scores 4295, which is 0.9% lower. The NVIDIA GeForce 930M scores 4388, which is 1.2% higher. The NVIDIA GeForce GTX 460M scores 4282, which is 1.2% lower. These delta percentages are small, all within roughly one percent of the RTX 4070 GDDR6's average score, suggesting that the 4335 average places it in a tight cluster of older or lower-tier parts in the database's scoring system.
Because the Radeon 840M has no benchmark entries, a direct numerical comparison of measured performance is not possible from the recorded data. The available structural metrics, however, indicate a very large theoretical gap. The RTX 4070 GDDR6's FP32 throughput is 29.15 TFLOPS, while the Radeon 840M's FP32 is 1,484.8 GFLOPS, which is 1.4848 TFLOPS. That is a 19.6x difference in raw FP32 capability in favor of the NVIDIA card. The pixel rate for the RTX 4070 GDDR6 is 158.4 GPixel/s versus 23.20 GPixel/s for the 840M, a 6.8x difference. Texture rate is 455.4 GTexel/s versus 46.40 GTexel/s, a 9.8x difference.
Memory bandwidth is also heavily skewed. The RTX 4070 GDDR6 delivers 480.0 GB/s over a 192 bit bus, while the 840M's bandwidth is System Dependent and not quantified. The 840M's memory clock is listed as System Shared, so no fixed bandwidth figure exists for it. The 12 GB dedicated frame buffer of the RTX 4070 GDDR6 also contrasts with the fully shared memory model of the IGP.
The wins counters in the database show zero wins for each GPU in direct head-to-head tests, which reflects the absence of recorded comparisons rather than a tie in performance. The Radeon 840M's 50th percentile versus all GPUs is a neutral placement, while the RTX 4070 GDDR6's 25th percentile is lower, despite its far higher theoretical compute figures. This percentile discrepancy likely reflects the distribution of benchmark scores in the database rather than real-world performance equivalence.
The Verdict
The recorded data supports a clear structural hierarchy. The NVIDIA GeForce RTX 4070 GDDR6 provides 29.15 TFLOPS of FP32 performance, 480.0 GB/s of dedicated memory bandwidth, 5888 shading units, 184 tensor cores, and 46 RT cores. The AMD Radeon 840M provides 1,484.8 GFLOPS of FP32 performance, system-shared memory with dependent bandwidth, 256 shading units, no listed tensor cores, and 4 RT cores. Every measured compute metric in the database favors the RTX 4070 GDDR6 by a wide margin, ranging from roughly 6.8x in pixel rate to 19.6x in FP32.
The Radeon 840M's advantages are limited to integration and power. It operates at 15 W TDP, requires no power connectors, and fits an IGP form factor. The RTX 4070 GDDR6 requires 200 W, a 16-pin connector, a 550 W suggested PSU, and a dual-slot physical footprint. For a system where power draw and physical space are the primary constraints, the 840M is the only viable option in this pairing. For any workload that depends on raw graphics throughput, memory bandwidth, or ray tracing, the RTX 4070 GDDR6 is the stronger part by every numerical measure in the database.
The RTX 4070 GDDR6's benchmark score of 4335 in 3DMark Steel Nomad DX12, with nearest rivals within 1.2%, indicates that its measured performance in that specific test is moderate relative to the broader database. The Radeon 840M has no comparable score, so its actual measured performance cannot be verified from the data. The 840M's 50th percentile versus all GPUs is a neutral database placement, but without benchmark entries, it carries no demonstrated performance validation.
The production status also matters for selection. The Radeon 840M is Active, released in 2025, and has no successor listed. The RTX 4070 GDDR6 is End-of-life, released in 2024, with the GeForce 50 listed as its successor. A buyer looking for a currently produced part would favor the 840M on availability. A buyer looking for maximum performance from the recorded specifications would favor the RTX 4070 GDDR6, despite its end-of-life status.
The verdict from the data is straightforward. The RTX 4070 GDDR6 is the performance leader in all quantified metrics: compute throughput, memory bandwidth, texture rate, pixel rate, and hardware feature count. The Radeon 840M is the efficiency and integration leader, with a 15 W TDP and no external power requirement. The choice depends entirely on whether the system can accommodate a 200 W dual-slot discrete card or requires an IGP solution.
Specification Differences
The two GPUs differ in nearly every recorded specification field.
Process and die: The 840M uses a 4 nm TSMC process; the RTX 4070 GDDR6 uses a 5 nm TSMC process. The RTX 4070 GDDR6 has 35,800 million transistors, a 294 mm² die size, and a transistor density of 121.8M per mm². The 840M's transistor count and die size are unknown.
Clocks: The 840M has a 400 MHz base clock and a 2900 MHz boost clock. The RTX 4070 GDDR6 has a 1920 MHz base clock and a 2475 MHz boost clock. The RTX 4070 GDDR6 memory clock is 2500 MHz (20 Gbps effective); the 840M memory clock is System Shared.
Memory: The 840M uses System Shared size, type, bus width, and System Dependent bandwidth. The RTX 4070 GDDR6 has 12 GB GDDR6, a 192 bit bus, and 480.0 GB/s bandwidth.
Compute units: The 840M has 256 shading units, 16 TMUs, 8 ROPs, and 4 RT cores. The RTX 4070 GDDR6 has 5888 shading units, 184 TMUs, 64 ROPs, 46 RT cores, and 184 tensor cores.
Rates: The 840M delivers 23.20 GPixel/s, 46.40 GTexel/s, 1,484.8 GFLOPS FP32, and 1,484.8 GFLOPS FP16 (1:1). The RTX 4070 GDDR6 delivers 158.4 GPixel/s, 455.4 GTexel/s, 29.15 TFLOPS FP32, and 29.15 TFLOPS FP16 (1:1).
Power and board: The 840M has a 15 W TDP, IGP slot width, no power connectors, no suggested PSU, and PCIe 4.0 x8. The RTX 4070 GDDR6 has a 200 W TDP, dual-slot width, one 16-pin power connector, a 550 W suggested PSU, and PCIe 4.0 x16.
Dimensions and outputs: The 840M has no listed dimensions and Portable Device Dependent display outputs. The RTX 4070 GDDR6 measures 240 mm x 110 mm x 40 mm and provides 1x HDMI 2.1 plus 3x DisplayPort 1.4a.
APIs: Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. No difference exists in this field.
Status: The 840M is Active with a 2025-02-28 release date and no successor. The RTX 4070 GDDR6 is End-of-life with a 2024-08-19 release date, GeForce 30 as predecessor, and GeForce 50 as successor.