AMD Radeon 820M vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison

AMD
RADEON

AMD Radeon 820M

CORE STATE Krackan Point 2
VRAM System Shared
CLOCK SPEED 2800 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: AMD Radeon 820M vs NVIDIA GeForce RTX 4070 Ti SUPER AD102

The Verdict

The AMD Radeon 820M and NVIDIA GeForce RTX 4070 Ti SUPER AD102 occupy opposite ends of the GPU spectrum. The Radeon 820M is an integrated graphics processor built for thin-and-light laptops, while the RTX 4070 Ti SUPER AD102 is a triple-slot, 285 W desktop add-in board. The database records only one benchmark for the RTX 4070 Ti SUPER AD102, with an average score of 6270 in 3DMark Steel Nomad DX12; the Radeon 820M has no recorded benchmark scores. The RTX 4070 Ti SUPER AD102 sits at the 36th percentile of all GPUs in the database, while the Radeon 820M sits at the 50th percentile, though that percentile is based on no measured scores. The data confirms the RTX 4070 Ti SUPER AD102 is the clear choice for any workload requiring discrete rendering performance. The Radeon 820M suits systems where power draw of 15 W and an integrated form factor matter more than raw output.

Architecture Differences

The Radeon 820M uses the RDNA 3.5 architecture built on TSMC's 4 nm process. It belongs to the Navi III IGP generation for Strix Point Mobile and integrates the Krackan Point 2 chip. The GPU has 128 shading units, 8 texture mapping units, and 4 raster operation pipelines. It includes 2 ray tracing cores and no tensor cores. Its base clock runs at 400 MHz with a boost of 2800 MHz. The memory subsystem is entirely system shared, with the bus width and capacity dependent on the host system. The pixel rate is 11.20 GPixel/s, the texture rate is 22.40 GTexel/s, and FP32 throughput reaches 716.8 GFLOPS with FP16 at the same 716.8 GFLOPS in a 1:1 ratio. The card draws 15 W, uses no power connectors, and connects via PCIe 4.0 x8. Display outputs are portable-device dependent.

The RTX 4070 Ti SUPER AD102 uses the Ada Lovelace architecture on TSMC's 5 nm process. The AD102 chip contains 76,300 million transistors on a 609 mm² die, yielding a transistor density of 125.3M per mm². The GPU has 8448 shading units, 264 texture mapping units, 96 raster operation pipelines, 66 ray tracing cores, and 264 tensor cores. The base clock is 2340 MHz with a boost of 2610 MHz. Memory is 16 GB of GDDR6X on a 256-bit bus, running at 1313 MHz (21 Gbps effective) for 672.3 GB/s of bandwidth. The pixel rate is 250.6 GPixel/s, texture rate is 689.0 GTexel/s, and FP32 performance is 44.10 TFLOPS with FP16 also at 44.10 TFLOPS in a 1:1 ratio. The board consumes 285 W, requires a 600 W suggested power supply, uses a single 16-pin connector, and occupies a triple-slot width. Its dimensions are 310 mm in length, 140 mm in height, and 61 mm in width. Display outputs include 1x HDMI 2.1 and 3x DisplayPort 1.4a.

The API support is identical on paper: both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The process nodes differ by 1 nm, with the Radeon on the smaller 4 nm node. The Radeon 820M uses PCIe 4.0 x8, while the RTX 4070 Ti SUPER AD102 uses PCIe 4.0 x16. The Radeon 820M was released on 2025-02-28 and remains active in production. The RTX 4070 Ti SUPER AD102 was released on 2024-06-09 and is now end-of-life, with the GeForce 50 series listed as its successor.

Where Each One Wins

The RTX 4070 Ti SUPER AD102 wins in every measured performance category recorded in the database. Its FP32 throughput of 44.10 TFLOPS is 61.5 times higher than the Radeon 820M's 716.8 GFLOPS. The texture rate of 689.0 GTexel/s is 30.8 times the Radeon's 22.40 GTexel/s. The pixel rate of 250.6 GPixel/s is 22.4 times the Radeon's 11.20 GPixel/s. The RTX card has 66 ray tracing cores and 264 tensor cores, while the Radeon has only 2 ray tracing cores and no tensor cores. The RTX card has 16 GB of dedicated GDDR6X memory with 672.3 GB/s bandwidth; the Radeon relies on system shared memory with bandwidth dependent on the host platform.

The Radeon 820M wins in power efficiency and physical footprint. Its 15 W TDP is 270 W lower than the RTX card's 285 W. It is an IGP with no slot width, no power connectors, and no length, height, or width dimensions recorded. The RTX card is a triple-slot board measuring 310 mm long, 140 mm tall, and 61 mm wide with a 16-pin connector. The Radeon uses PCIe 4.0 x8, which may fit platforms with fewer lanes. The Radeon also has a newer production status (Active) versus the RTX card's end-of-life status.

For a system that needs GPU compute in a portable device, the Radeon 820M is the only option that fits. For any desktop build where the 285 W power draw and triple-slot footprint are acceptable, the RTX 4070 Ti SUPER AD102 delivers the only measured benchmark score in this comparison.

FAQ

Q: Which GPU has a higher benchmark score?

A: The RTX 4070 Ti SUPER AD102 has a recorded average benchmark score of 6270 in 3DMark Steel Nomad DX12. The Radeon 820M has no recorded benchmark scores in the database.

Q: How much memory does each GPU have?

A: The RTX 4070 Ti SUPER AD102 has 16 GB of GDDR6X on a 256-bit bus with 672.3 GB/s bandwidth. The Radeon 820M uses system shared memory, with capacity, type, and bus width all listed as system dependent.

Q: What are the power requirements?

A: The Radeon 820M draws 15 W and requires no power connectors. The RTX 4070 Ti SUPER AD102 draws 285 W, uses a 1x 16-pin connector, and has a suggested power supply of 600 W.

Q: Which GPU has more ray tracing cores?

A: The RTX 4070 Ti SUPER AD102 has 66 ray tracing cores. The Radeon 820M has 2 ray tracing cores.

Q: Are both GPUs still in production?

A: The Radeon 820M is listed as Active. The RTX 4070 Ti SUPER AD102 is listed as End-of-life, with the GeForce 50 series as its successor.

Q: What is the process node for each chip?

A: The Radeon 820M uses a 4 nm process at TSMC. The RTX 4070 Ti SUPER AD102 uses a 5 nm process at TSMC.

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark entries between the AMD Radeon 820M and the NVIDIA GeForce RTX 4070 Ti SUPER AD102. The headToHeadBenchmarks array is empty, and the wins count stands at 0 for the Radeon and 1 for the RTX card based solely on the RTX card's single recorded benchmark.

The RTX 4070 Ti SUPER AD102 scores 6269.5 in 3DMark Steel Nomad DX12. Its average benchmark score across the database is 6270. The nearest rivals in the database show how tight the competition is at this performance level. The NVIDIA GeForce RTX 5070 Ti SUPER has an identical average score of 6270, a delta of 0 percent. The NVIDIA Quadro K620 scores 6282, which is 0.2 percent higher than the RTX 4070 Ti SUPER AD102. The AMD FirePro W600 scores 6223, which is 0.8 percent lower. The AMD Radeon R7 M350 scores 6327, which is 0.9 percent higher. These deltas place the RTX 4070 Ti SUPER AD102 in a narrow band where rival cards are within roughly 1 percent in either direction.

The Radeon 820M has no benchmark scores, no nearest rivals, and an average benchmark score of 0. Its percentile of 50 against all GPUs is recorded without any measured performance data to support it. The FP32 comparison is the clearest numerical gap: the RTX card delivers 44.10 TFLOPS against the Radeon's 716.8 GFLOPS. That is a 61.5x difference in raw shader throughput. The texture rate gap is similarly decisive at 689.0 GTexel/s versus 22.40 GTexel/s, a 30.8x difference. The pixel rate gap is 250.6 GPixel/s versus 11.20 GPixel/s, a 22.4x difference.

Memory bandwidth tells the same story. The RTX card has 672.3 GB/s of dedicated bandwidth on a 256-bit GDDR6X interface. The Radeon's bandwidth is listed as "System Dependent," meaning it borrows from the host's memory controller and has no fixed figure. The RTX card's 16 GB capacity is fixed and dedicated; the Radeon's capacity is whatever the host system allocates.

Clock behavior differs substantially. The Radeon boosts to 2800 MHz from a 400 MHz base, a 2400 MHz operating range. The RTX card boosts to 2610 MHz from a 2340 MHz base, a 270 MHz range. The Radeon's higher boost clock does not compensate for its far smaller execution resources. The 128 shading units of the Radeon cannot match the 8448 shading units of the RTX card regardless of clock speed.

The RTX card's 264 tensor cores and 66 ray tracing cores provide dedicated hardware that the Radeon lacks entirely for tensor work and almost entirely for ray tracing, with only 2 ray tracing cores present. The API feature sets match at DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, meaning both cards expose the same API levels, but the underlying throughput is in completely different classes.

The release timeline shows the Radeon 820M launching on 2025-02-28, after the RTX 4070 Ti SUPER AD102's 2024-06-09 release. The RTX card is already end-of-life with a successor named, while the Radeon remains active. The RTX card has a recorded launch MSRP of 799 USD. The Radeon has no launch MSRP recorded.

The production status and form factor differences reinforce the positioning. The Radeon is an IGP with no slot width, no power connectors, and no physical dimensions. The RTX card is a 310 mm triple-slot board with a 16-pin connector and a 600 W suggested power supply. The RTX card requires a desktop chassis with substantial cooling and power delivery. The Radeon fits into a portable device with no additional power wiring. The database shows one is a complete discrete GPU solution and the other is an integrated component whose output depends on the host system.

DETAILED SPECIFICATIONS

SPECIFICATION
820M
RTX 4070 Ti SUPER AD102
Core Specs
Shading Units
128
8,448 +6500.0%
Shaders
128
8,448 +6500.0%
TMUs
8
264 +3200.0%
ROPs
4
96 +2300.0%
Compute Units
2
—
SM Count
—
66
Clocks
Base Clock
400 MHz
2340 MHz
Boost Clock
2800 MHz
2610 MHz
Memory Clock
System Shared
1313 MHz 21 Gbps effective
Memory
Memory Size
System Shared
16 GB
VRAM (MB)
—
16,384
Memory Type
System Shared
GDDR6X
Memory Bus
System Shared
256 bit
Bandwidth
System Dependent
672.3 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
1024 KB
48 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
11.20 GPixel/s
250.6 GPixel/s
Texture Rate
22.40 GTexel/s
689.0 GTexel/s
FP32 (TFLOPS)
716.8 GFLOPS
44.10 TFLOPS
FP64 (TFLOPS)
44.80 GFLOPS (1:16)
689.0 GFLOPS (1:64)
FP16 (TFLOPS)
716.8 GFLOPS (1:1)
44.10 TFLOPS (1:1)
AI/RT
RT Cores
2
66 +3200.0%
Tensor Cores
—
264
Power
TDP
15 W
285 W
TDP (W)
15
285 +1800.0%
Suggested PSU
—
600 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.5
Ada Lovelace
GPU Name
Krackan Point 2
AD102
Generation
Navi III IGP (Strix Point Mobile)
GeForce 40
Process Size
4 nm
5 nm
Transistors
unknown
76,300 million
Die Size
unknown
609 mm²
Foundry
TSMC
TSMC
Density
—
125.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Triple-slot
Length
—
310 mm 12.2 inches
Height
—
140 mm 5.5 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x16
Other
Launch Price
—
799 USD
Production
Active
End-of-life
Predecessor
Navi II IGP
GeForce 30
Successor
—
GeForce 50
View Radeon 820M Details View GeForce RTX 4070 Ti SUPER AD102 Details