AMD Radeon 820M vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

AMD
RADEON

AMD Radeon 820M

CORE STATE Krackan Point 2
VRAM System Shared
CLOCK SPEED 2800 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
142
passmark_directx_11
N/A
220
passmark_directx_12
N/A
82
passmark_directx_9
N/A
228
passmark_g2d
N/A
1,169
passmark_g3d
N/A
21,981
passmark_gpu_compute
N/A
11,365

Analysis: AMD Radeon 820M vs NVIDIA GeForce RTX 5060 Ti 8 GB

Head-to-Head Benchmarks

The recorded data for this comparison is one-sided. The AMD Radeon 820M has no benchmark entries in the database, while the NVIDIA GeForce RTX 5060 Ti 8 GB has a full set of recorded scores. The NVIDIA part's average benchmark score is 4901, and it sits at the 29th percentile among all GPUs in the database, indicating that roughly a quarter of recorded GPUs perform below it.

The RTX 5060 Ti 8 GB delivers its strongest results in the PassMark G3D test, scoring 21981. This is its highest individual benchmark score by a wide margin. The GPU compute test returns 11365, which is roughly half of the G3D result, showing that compute performance is substantial but not as dominant as rasterization-focused workloads. The 2D test scores 1169, a far lower figure that reflects the difference between desktop composition work and full 3D rendering.

The DirectX API scaling on the RTX 5060 Ti 8 GB is informative. The PassMark DirectX 9 score is 228, DirectX 10 is 142, DirectX 11 is 220, and DirectX 12 is 82. The DirectX 9 result leads the legacy API tests, while the DirectX 12 score is the lowest of the four. This pattern suggests that the card's performance under modern API workloads does not scale linearly with its raw compute capacity, and that legacy API tests may be more sensitive to driver-level optimizations than to raw hardware throughput.

In the 3DMark Steel Nomad DX12 test, the RTX 5060 Ti 8 GB records a score of 4019. This is a modern, demanding workload, and the result is consistent with the card's positioning as a mid-range part based on its percentile rank. The nearest rivals in the database all cluster around this performance level. The AMD FirePro W5130M averages 4904, which is 0.1% below the RTX 5060 Ti 8 GB. The NVIDIA GeForce GTS 450 averages 4893, which is 0.2% above. The AMD Radeon R7 M265 and R7 M360 average 4929 and 4931 respectively, both 0.6% below the RTX 5060 Ti 8 GB. These delta percentages are extremely small, placing the RTX 5060 Ti 8 GB in a very tight performance band around its closest competition.

Because the Radeon 820M has no benchmark data, there is no direct head-to-head score comparison possible. The wins count is 0 for the AMD part and 0 for the NVIDIA part, reflecting the absence of paired test results. The data indicates that the RTX 5060 Ti 8 GB is a measured, quantified product with a clear performance profile, while the Radeon 820M is recorded only through its architectural and specification data.

The Verdict

The data supports a straightforward selection for most use cases. The NVIDIA GeForce RTX 5060 Ti 8 GB is the only part in this comparison with recorded benchmark scores, and those scores establish it as a functional discrete GPU with a 29th percentile rank among all GPUs. Its average benchmark score of 4901 places it in the company of the AMD FirePro W5130M, NVIDIA GeForce GTS 450, and the two Radeon R7 mobile parts, all within a 0.6% band of each other.

The AMD Radeon 820M is an integrated graphics processor with no benchmark entries. Its percentile rank is 50, but that rank is not supported by any measured scores in the database. Without recorded performance data, its actual standing among GPUs cannot be verified from the available information. The RTX 5060 Ti 8 GB, by contrast, has eight separate benchmark results spanning legacy DirectX tests, modern 3DMark workloads, 2D operations, and GPU compute.

For anyone selecting between these two based strictly on database records, the NVIDIA card is the only one with evidence of discrete-level performance. The Radeon 820M's role is defined by its specifications: it is an IGP with shared system memory, a 15 W TDP, and no power connectors. Those attributes point to a low-power integrated solution, not a standalone graphics card. The RTX 5060 Ti 8 GB is a dual-slot card with a 180 W TDP, a 450 W suggested PSU, and a 1x 8-pin power connector, which are the markers of a dedicated add-in board.

Architecture Differences

The two GPUs come from different architectural generations and process nodes. The AMD Radeon 820M uses the RDNA 3.5 architecture on a 4 nm TSMC process, with the chip identified as Krackan Point 2 and the generation listed as Navi III IGP (Strix Point Mobile). The NVIDIA GeForce RTX 5060 Ti 8 GB uses the Blackwell 2.0 architecture on a 5 nm TSMC process, with the chip identified as GB206 and the generation listed as GeForce 50.

The transistor counts show a massive disparity in physical complexity. The RTX 5060 Ti 8 GB has 21,900 million transistors on a 181 mm² die, giving a transistor density of 121.0M per mm². The Radeon 820M's transistor count and die size are both recorded as unknown, so no density figure can be calculated. The NVIDIA part's transistor density is the only measurable one in this comparison.

Compute resource counts differ sharply. The Radeon 820M has 128 shading units, 8 texture mapping units, 4 render output units, and 2 ray tracing cores. The RTX 5060 Ti 8 GB has 4608 shading units, 144 TMUs, 48 ROPs, 36 ray tracing cores, and 144 tensor cores. The NVIDIA card has no tensor core equivalent in the AMD part, as the Radeon 820M lists no tensor cores at all. The shading unit count is 36 times higher on the NVIDIA card, and the ROP count is 12 times higher.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. This means both parts expose the same API feature levels, including hardware ray tracing support through the DirectX 12 Ultimate feature set. The Radeon 820M includes 2 ray tracing cores, while the RTX 5060 Ti 8 GB includes 36, so the ray tracing capability is present in both but at very different scale.

Specification Differences

Clock speeds differ in both direction and magnitude. The Radeon 820M has a base clock of 400 MHz and a boost clock of 2800 MHz. The RTX 5060 Ti 8 GB has a base clock of 2407 MHz and a boost clock of 2572 MHz. The AMD part has a much lower base clock but a higher boost clock, while the NVIDIA part runs at a higher sustained base frequency.

Memory configuration is a fundamental split. The Radeon 820M uses system shared memory, with system shared type, system shared bus width, and system dependent bandwidth. The RTX 5060 Ti 8 GB has 8 GB of GDDR7 memory on a 128 bit bus with 448.0 GB/s bandwidth and a memory clock of 1750 MHz or 28 Gbps effective. The integrated AMD part has no dedicated memory bandwidth figure, while the NVIDIA card's bandwidth is a fixed, measured specification.

The compute throughput figures show the scale of the difference. The Radeon 820M delivers 716.8 GFLOPS of FP32 and FP16 performance at a 1:1 ratio. The RTX 5060 Ti 8 GB delivers 23.70 TFLOPS of FP32 and FP16, also at 1:1. That is roughly 33 times more FP32 throughput. Pixel rate on the AMD part is 11.20 GPixel/s, while the NVIDIA part reaches 123.5 GPixel/s. Texture rate is 22.40 GTexel/s on the AMD part versus 370.4 GTexel/s on the NVIDIA part.

Power and physical specifications differ accordingly. The Radeon 820M has a 15 W TDP, is an IGP, uses no power connectors, and has no suggested PSU. The RTX 5060 Ti 8 GB has a 180 W TDP, is dual-slot, uses a 1x 8-pin power connector, and has a 450 W suggested PSU. The NVIDIA card measures 241 mm by 111 mm by 40 mm, while the AMD part has no recorded dimensions. The bus interface is PCIe 4.0 x8 for the AMD part and PCIe 5.0 x8 for the NVIDIA part. Display outputs on the AMD part are listed as portable device dependent, while the NVIDIA card has 1x HDMI 2.1b and 3x DisplayPort 2.1b. The NVIDIA card's launch MSRP is 379 USD.

FAQ

Q: Which GPU has higher raw compute throughput?

A: The NVIDIA GeForce RTX 5060 Ti 8 GB delivers 23.70 TFLOPS of FP32, while the AMD Radeon 820M delivers 716.8 GFLOPS.

Q: Does the AMD Radeon 820M support ray tracing?

A: Yes, it has 2 ray tracing cores and supports DirectX 12 Ultimate (12_2), the same API feature level as the NVIDIA card.

Q: What memory does the NVIDIA GeForce RTX 5060 Ti 8 GB use?

A: It uses 8 GB of GDDR7 memory on a 128 bit bus with 448.0 GB/s bandwidth.

Q: What is the power requirement difference between the two?

A: The AMD Radeon 820M has a 15 W TDP and no power connectors, while the NVIDIA card has a 180 W TDP, a 1x 8-pin connector, and a 450 W suggested PSU.

Q: Which GPU has more shading units?

A: The NVIDIA GeForce RTX 5060 Ti 8 GB has 4608 shading units, compared to 128 on the AMD Radeon 820M.

Q: Are there benchmark scores for the AMD Radeon 820M?

A: The database contains no benchmark entries for the AMD Radeon 820M, while the NVIDIA card has 8 recorded scores.

Where Each One Wins

The NVIDIA GeForce RTX 5060 Ti 8 GB wins every category where measured data exists. Its benchmark results cover 3DMark Steel Nomad DX12, PassMark G3D, GPU compute, and multiple DirectX API tests. The 3DMark Steel Nomad score of 4019 and the PassMark G3D score of 21981 establish it as a discrete GPU with measurable performance. Its 448.0 GB/s of dedicated GDDR7 bandwidth, 23.70 TFLOPS of FP32 throughput, and 36 ray tracing cores give it a clear advantage in any workload that relies on sustained compute, high bandwidth, or hardware ray tracing.

The AMD Radeon 820M wins in power efficiency and physical integration. Its 15 W TDP is 12 times lower than the NVIDIA card's 180 W TDP. It requires no power connectors, has no suggested PSU, and is an IGP, meaning it fits into a portable device without a separate card slot. Its system shared memory model eliminates the need for dedicated VRAM, and its PCIe 4.0 x8 interface is sufficient for an integrated part. For a thin-and-light portable device where battery life and thermal constraints matter more than raw frame rates, the Radeon 820M's specifications align with that use case.

The benchmark data does not support the AMD part in any performance comparison, but its architectural profile indicates it is designed for a different class of system entirely. The NVIDIA card is a dual-slot add-in board with a 241 mm length and a 450 W suggested PSU, which places it in a desktop tower with adequate power delivery and cooling. The Radeon 820M is a 4 nm integrated solution with no dimensions, no display outputs of its own, and a portable device dependent output configuration. Each part wins in the context it was built for: the RTX 5060 Ti 8 GB for measured discrete performance, and the Radeon 820M for low-power integrated graphics in mobile hardware.

DETAILED SPECIFICATIONS

SPECIFICATION
820M
RTX 5060 Ti 8 GB
Core Specs
Shading Units
128
4,608 +3500.0%
Shaders
128
4,608 +3500.0%
TMUs
8
144 +1700.0%
ROPs
4
48 +1100.0%
Compute Units
2
—
SM Count
—
36
Clocks
Base Clock
400 MHz
2407 MHz
Boost Clock
2800 MHz
2572 MHz
Memory Clock
System Shared
1750 MHz 28 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR7
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
448.0 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
1024 KB
32 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
11.20 GPixel/s
123.5 GPixel/s
Texture Rate
22.40 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
716.8 GFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
44.80 GFLOPS (1:16)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
716.8 GFLOPS (1:1)
23.70 TFLOPS (1:1)
AI/RT
RT Cores
2
36 +1700.0%
Tensor Cores
—
144
Power
TDP
15 W
180 W
TDP (W)
15
180 +1100.0%
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
RDNA 3.5
Blackwell 2.0
GPU Name
Krackan Point 2
GB206
Generation
Navi III IGP (Strix Point Mobile)
GeForce 50
Process Size
4 nm
5 nm
Transistors
unknown
21,900 million
Die Size
unknown
181 mm²
Foundry
TSMC
TSMC
Density
—
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
12.0
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x8
Other
Launch Price
—
379 USD
Production
Active
Active
Predecessor
Navi II IGP
GeForce 40
Successor
—
GeForce 60
View Radeon 820M Details View GeForce RTX 5060 Ti 8 GB Details