AMD Radeon 820M vs NVIDIA GeForce RTX 4070 GDDR6 Comparison

AMD
RADEON

AMD Radeon 820M

CORE STATE Krackan Point 2
VRAM System Shared
CLOCK SPEED 2800 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 4070 GDDR6

CORE STATE AD104
VRAM 12 GB
CLOCK SPEED 2475 MHz
TDP 200 W
BUS WIDTH 192 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,334.5

Analysis: AMD Radeon 820M vs NVIDIA GeForce RTX 4070 GDDR6

Head-to-Head Benchmarks

The benchmark database contains no direct head-to-head measurements between the AMD Radeon 820M and the NVIDIA GeForce RTX 4070 GDDR6. The two devices occupy entirely separate performance classes, and the recorded data confirms this divide through their respective average scores and percentile rankings.

The NVIDIA GeForce RTX 4070 GDDR6 delivers an average benchmark score of 4335 from its one recorded 3DMark Steel Nomad DX12 run, where it achieved a score of 4334.5. This places the card at the 25th percentile among all GPUs in the database. The AMD Radeon 820M holds a 50th percentile ranking, but its average benchmark score is 0, meaning no standardized benchmark results are recorded for this integrated processor. A score of zero cannot be compared numerically to 4335, but the percentile gap indicates that the RTX 4070 GDDR6 sits comfortably above the midpoint of all GPUs, while the 820M's percentile reflects its position as an integrated graphics solution without dedicated benchmark data.

Looking at the RTX 4070 GDDR6's nearest rivals in the database, the measured spread is narrow. The Intel Iris Pro Graphics 5200 scores 4360, which is 0.6% above the RTX 4070 GDDR6's average. The NVIDIA GeForce 930M scores 4388, a 1.2% advantage. On the other side, the AMD FirePro W2100 scores 4295, which is 0.9% below, and the NVIDIA GeForce GTX 460M scores 4282, a 1.2% deficit. These four rivals bracket the RTX 4070 GDDR6 within a band of roughly 2.4 percentage points, which indicates that in this particular database, the card's recorded performance is consistent with a specific performance tier rather than an outlier.

The absence of head-to-head results means the database offers no direct win count for either device. WinsA and winsB are both zero. The practical implication is that any comparison must rely on the architectural specifications and the single benchmark data point available for the RTX 4070 GDDR6.

Where Each One Wins

The AMD Radeon 820M is an integrated graphics processor built for portability and low power operation. Its 15 W TDP and IGP slot width indicate it is designed to share system resources and operate within the thermal envelope of a laptop or compact device. The 820M uses system-shared memory for both capacity and bandwidth, and its memory bandwidth is listed as system dependent. This makes the 820M suited to scenarios where dedicated graphics memory is unavailable and where the workload must fit within the host system's memory architecture. Its 128 shading units, 8 texture mapping units, and 4 render output units are consistent with an entry-level integrated solution.

The NVIDIA GeForce RTX 4070 GDDR6 wins in every scenario where dedicated graphics performance is required. It has 12 GB of GDDR6 memory on a 192-bit bus, delivering 480.0 GB/s of bandwidth. This dedicated memory subsystem allows the card to handle large textures and high-resolution assets without competing with the CPU for system memory. The card's 200 W TDP and dual-slot footprint reflect a discrete add-in board designed for sustained performance.

The RTX 4070 GDDR6 also holds the advantage in compute throughput. Its FP32 performance is 29.15 TFLOPS, and its FP16 performance matches at 29.15 TFLOPS with a 1:1 ratio. The pixel rate is 158.4 GPixel/s and the texture rate is 455.4 GTexel/s. The 820M, by comparison, delivers 716.8 GFLOPS in both FP32 and FP16, with a pixel rate of 11.20 GPixel/s and a texture rate of 22.40 GTexel/s. The difference is substantial: the RTX 4070 GDDR6 delivers roughly 40 times the FP32 throughput, 14 times the pixel rate, and 20 times the texture rate.

For ray tracing, the RTX 4070 GDDR6 includes 46 dedicated RT cores and 184 tensor cores. The 820M includes 2 RT cores and no tensor cores. This means the NVIDIA card is equipped for hardware-accelerated ray tracing and AI-accelerated workloads, while the AMD part offers only basic ray tracing capability and no tensor processing.

Architecture Differences

The AMD Radeon 820M uses the RDNA 3.5 architecture, built on a 4 nm process at TSMC. It is part of the Navi III IGP generation for Strix Point Mobile, and its chip is designated Krackan Point 2. The 820M is the successor to the Navi II IGP. The transistor count and die size are listed as unknown, so no density comparison can be made from the recorded data.

The NVIDIA GeForce RTX 4070 GDDR6 uses the Ada Lovelace architecture, built on a 5 nm process at TSMC. The chip is AD104, with 35,800 million transistors on a 294 mm² die, giving a transistor density of 121.8 million transistors per square millimeter. The card is part of the GeForce 40-series and serves as the predecessor to the GeForce 50 series.

The API support is identical on paper: both devices support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The underlying hardware implementations differ significantly, but the software feature set is the same.

The memory architecture is a fundamental split. The 820M uses system-shared memory with a system-dependent bus width and bandwidth. The RTX 4070 GDDR6 uses 12 GB of dedicated GDDR6 memory on a 192-bit bus with 480.0 GB/s of bandwidth. The clock configurations also differ: the 820M runs at a 400 MHz base clock and a 2800 MHz boost clock, while the RTX 4070 GDDR6 runs at 1920 MHz base and 2475 MHz boost, with memory clocked at 2500 MHz or 20 Gbps effective.

The 820M is fabricated on a smaller 4 nm node, which is a process advantage over the RTX 4070 GDDR6's 5 nm node. However, the NVIDIA card compensates with a much larger die and a far higher transistor count. The RTX 4070 GDDR6 also has a wider bus interface at PCIe 4.0 x16, versus the 820M's PCIe 4.0 x8.

FAQ

Q: Which GPU has a higher FP32 compute throughput?

A: The NVIDIA GeForce RTX 4070 GDDR6 delivers 29.15 TFLOPS in FP32, while the AMD Radeon 820M delivers 716.8 GFLOPS. The NVIDIA card's FP32 throughput is roughly 40 times higher.

Q: Do both GPUs support the same graphics APIs?

A: Yes. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: How much memory does each GPU have?

A: The NVIDIA GeForce RTX 4070 GDDR6 has 12 GB of GDDR6 memory on a 192-bit bus. The AMD Radeon 820M uses system-shared memory, with its size, type, and bus width all listed as system shared.

Q: What is the power consumption difference?

A: The AMD Radeon 820M has a 15 W TDP, while the NVIDIA GeForce RTX 4070 GDDR6 has a 200 W TDP. The RTX 4070 GDDR6 also has a suggested PSU rating of 550 W and uses a single 16-pin power connector, while the 820M uses no power connectors.

Q: Which GPU has ray tracing hardware?

A: Both have ray tracing capability. The NVIDIA GeForce RTX 4070 GDDR6 includes 46 RT cores and 184 tensor cores. The AMD Radeon 820M includes 2 RT cores and no tensor cores.

Q: What is the production status of each GPU?

A: The AMD Radeon 820M is listed as Active, with a release date of 2025-02-28. The NVIDIA GeForce RTX 4070 GDDR6 is listed as End-of-life, with a release date of 2024-08-19.

Specification Differences

The two devices differ across nearly every recorded specification field.

The process node differs: the 820M uses 4 nm, while the RTX 4070 GDDR6 uses 5 nm, both at TSMC. The RTX 4070 GDDR6 has a recorded transistor count of 35,800 million and a die size of 294 mm², with a density of 121.8 million transistors per square millimeter. The 820M lists transistor count and die size as unknown.

Clock speeds differ substantially. The 820M has a 400 MHz base clock and a 2800 MHz boost clock. The RTX 4070 GDDR6 has a 1920 MHz base clock and a 2475 MHz boost clock, with memory clocked at 2500 MHz or 20 Gbps effective. The 820M's memory clock is listed as system shared.

Memory configuration is completely different. The 820M uses system-shared memory with system-dependent bandwidth. The RTX 4070 GDDR6 uses 12 GB of GDDR6 on a 192-bit bus with 480.0 GB/s of bandwidth.

The compute unit counts show the scale of the difference. The 820M has 128 shading units, 8 TMUs, and 4 ROPs. The RTX 4070 GDDR6 has 5888 shading units, 184 TMUs, and 64 ROPs. The RTX 4070 GDDR6 also has 46 RT cores and 184 tensor cores, versus 2 RT cores and no tensor cores on the 820M.

Rates and throughput figures favor the NVIDIA card. The 820M has a pixel rate of 11.20 GPixel/s and a texture rate of 22.40 GTexel/s. The RTX 4070 GDDR6 has a pixel rate of 158.4 GPixel/s and a texture rate of 455.4 GTexel/s. FP32 and FP16 are both 716.8 GFLOPS on the 820M, versus 29.15 TFLOPS on the RTX 4070 GDDR6.

Power and physical specifications differ. The 820M has a 15 W TDP, an IGP slot width, no power connectors, and a PCIe 4.0 x8 interface. The RTX 4070 GDDR6 has a 200 W TDP, a dual-slot width, one 16-pin power connector, a suggested PSU of 550 W, and a PCIe 4.0 x16 interface. The RTX 4070 GDDR6 measures 240 mm in length, 110 mm in height, and 40 mm in width. The 820M has no recorded dimensions.

Display outputs differ: the 820M is listed as portable device dependent, while the RTX 4070 GDDR6 has 1x HDMI 2.1 and 3x DisplayPort 1.4a.

The RTX 4070 GDDR6 has a launch MSRP of 599 USD. The 820M has no recorded launch MSRP.

The Verdict

The database positions these two GPUs at opposite ends of the graphics spectrum. The AMD Radeon 820M is an integrated processor with a 15 W TDP, system-shared memory, and modest compute resources. Its 50th percentile ranking among all GPUs, combined with no recorded benchmark scores, indicates it is a functional entry point for basic graphics tasks within a portable system.

The NVIDIA GeForce RTX 4070 GDDR6 is a discrete, dual-slot card with 12 GB of dedicated GDDR6 memory, 5888 shading units, 46 RT cores, and 184 tensor cores. Its single recorded benchmark score of 4334.5 in 3DMark Steel Nomad DX12 and its average score of 4335 place it in a performance tier that is closely matched by the four nearest rivals in the database: the Intel Iris Pro Graphics 5200, the AMD FirePro W2100, the NVIDIA GeForce 930M, and the NVIDIA GeForce GTX 460M. The performance differences among these five are all within 1.2 percentage points.

For workloads requiring dedicated memory bandwidth, high FP32 throughput, ray tracing, or tensor acceleration, the data points to the RTX 4070 GDDR6. For scenarios constrained by power, space, and system integration, the 820M is the available option. The recorded data shows no head-to-head results, so the comparison rests on the specification sheet and the single benchmark data point. The RTX 4070 GDDR6 is an end-of-life product, while the 820M remains active, but production status does not change the measured performance gap.

DETAILED SPECIFICATIONS

SPECIFICATION
820M
RTX 4070 GDDR6
Core Specs
Shading Units
128
5,888 +4500.0%
Shaders
128
5,888 +4500.0%
TMUs
8
184 +2200.0%
ROPs
4
64 +1500.0%
Compute Units
2
—
SM Count
—
46
Clocks
Base Clock
400 MHz
1920 MHz
Boost Clock
2800 MHz
2475 MHz
Memory Clock
System Shared
2500 MHz 20 Gbps effective
Memory
Memory Size
System Shared
12 GB
VRAM (MB)
—
12,288
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
192 bit
Bandwidth
System Dependent
480.0 GB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
1024 KB
36 MB
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
11.20 GPixel/s
158.4 GPixel/s
Texture Rate
22.40 GTexel/s
455.4 GTexel/s
FP32 (TFLOPS)
716.8 GFLOPS
29.15 TFLOPS
FP64 (TFLOPS)
44.80 GFLOPS (1:16)
455.4 GFLOPS (1:64)
FP16 (TFLOPS)
716.8 GFLOPS (1:1)
29.15 TFLOPS (1:1)
AI/RT
RT Cores
2
46 +2200.0%
Tensor Cores
—
184
Power
TDP
15 W
200 W
TDP (W)
15
200 +1233.3%
Suggested PSU
—
550 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.5
Ada Lovelace
GPU Name
Krackan Point 2
AD104
Generation
Navi III IGP (Strix Point Mobile)
GeForce 40
Process Size
4 nm
5 nm
Transistors
unknown
35,800 million
Die Size
unknown
294 mm²
Foundry
TSMC
TSMC
Density
—
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
110 mm 4.3 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x16
Other
Launch Price
—
599 USD
Production
Active
End-of-life
Predecessor
Navi II IGP
GeForce 30
Successor
—
GeForce 50
View Radeon 820M Details View GeForce RTX 4070 GDDR6 Details