AMD Instinct MI350P vs NVIDIA GeForce RTX 5070 Ti Comparison

Head-to-Head Benchmarks

The recorded data shows no direct head-to-head benchmark results between the AMD Instinct MI350P and the NVIDIA GeForce RTX 5070 Ti. The MI350P has no benchmark scores in the database, while the RTX 5070 Ti has an average benchmark score of 49957 and sits in the 86th percentile of all GPUs. The MI350P sits in the 50th percentile with an average score of zero, which reflects the absence of recorded measurements rather than actual performance parity.

The RTX 5070 Ti delivers its strongest results in the database across several tests. In 3DMark Steel Nomad DX12, it scores 6604. In Geekbench OpenCL, it records 212363, and in Geekbench Vulkan, it reaches 225122. Passmark results show a G3D score of 32974 and a GPU compute score of 20203. These are the only benchmark numbers available for either product in this comparison.

The MI350P is a compute-oriented accelerator with no display outputs and no API support for DirectX, OpenGL, or Vulkan. Its pixel rate is recorded as 0 MPixel/s. The RTX 5070 Ti, by contrast, supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and has a pixel rate of 235.4 GPixel/s. The absence of graphics API support on the MI350P means the benchmark tests recorded for the RTX 5070 Ti are not applicable to the AMD part.

Where Each One Wins

The RTX 5070 Ti wins in every measurable benchmark category in the database because it is the only one with recorded scores. Its nearest rivals in the database include the AMD Radeon RX Vega 64 with an average score of 50001 and a delta of -0.1 percent, the Intel Arc A550M at 49737 with a delta of 0.4 percent, the AMD Radeon RX 6900 XT at 50951 with a delta of -2 percent, and the AMD Radeon RX 6800 XT at 48477 with a delta of 3.1 percent. These deltas indicate that the RTX 5070 Ti is effectively within a narrow band of performance around these cards, with the RX 6900 XT sitting 2 percent higher and the RX 6800 XT sitting 3.1 percent lower.

The MI350P does not have nearest rival data, so no comparative performance statements can be made from the database. The data does show its compute specifications: 8192 shading units, 512 texture mapping units, zero ROPs, and a texture rate of 1126.4 GTexel/s. The FP32 and FP16 performance are both 36.04 TFLOPS with a 1:1 ratio. The RTX 5070 Ti has 8960 shading units, 280 TMUs, 96 ROPs, 70 RT cores, 280 tensor cores, a texture rate of 686.6 GTexel/s, and FP32 performance of 43.94 TFLOPS, also with a 1:1 FP16 ratio.

The MI350P wins on raw memory capacity and bandwidth. It has 144 GB of HBM3e memory on an 8192-bit bus with 8.19 TB/s of bandwidth. The RTX 5070 Ti has 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s of bandwidth. The MI350P has over eight times the memory capacity and over nine times the memory bandwidth, which points to a design intended for large data workloads rather than rasterization or ray tracing.

Architecture Differences

The MI350P uses the CDNA 4.0 architecture built on a 3 nm process at TSMC. The chip is named MI350 128CU and contains 73,000 million transistors on a die size of 1190 mm². The transistor density is 61.3 million per mm². The RTX 5070 Ti uses the Blackwell 2.0 architecture on a 5 nm process, also at TSMC. The GB203 chip contains 45,600 million transistors on a 378 mm² die, giving a transistor density of 120.6 million per mm². The NVIDIA part packs roughly twice the transistor density into a die that is less than one third the area.

Clock behavior differs substantially. The MI350P has a base clock of 1000 MHz and a boost clock of 2200 MHz. The RTX 5070 Ti has a base clock of 2295 MHz and a boost clock of 2452 MHz. Memory clocks also differ: the MI350P runs at 2000 MHz with 8 Gbps effective, while the RTX 5070 Ti runs at 1750 MHz with 28 Gbps effective. The higher effective memory rate on the NVIDIA card compensates for its narrower 256-bit bus.

The MI350P is built with compute-specific features. It has no display outputs, no RT cores listed, no tensor cores listed, and no DirectX, OpenGL, or Vulkan support. The RTX 5070 Ti has 70 RT cores and 280 tensor cores, plus a full graphics output suite with one HDMI 2.1b and three DisplayPort 2.1b connectors. The power characteristics reflect their different roles: the MI350P has a TDP of 600 W and a suggested PSU of 1000 W, while the RTX 5070 Ti has a TDP of 300 W and a suggested PSU of 700 W. Both use a single 16-pin power connector and are dual-slot cards.

The MI350P has a transistor count of 73,000 million versus 45,600 million for the RTX 5070 Ti. The MI350P's die is 1190 mm² versus 378 mm². The release dates differ by over a year: the RTX 5070 Ti was released on February 19, 2025, and the MI350P is dated May 6, 2026. The RTX 5070 Ti has an active production status, while the MI350P has no production status recorded.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The RTX 5070 Ti delivers 43.94 TFLOPS FP32, while the MI350P delivers 36.04 TFLOPS FP32. The NVIDIA card is approximately 22 percent higher in this metric.

Q: How much memory does each card have?

A: The MI350P has 144 GB of HBM3e memory on an 8192-bit bus with 8.19 TB/s bandwidth. The RTX 5070 Ti has 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s bandwidth.

Q: Does the MI350P support DirectX or Vulkan?

A: No. The MI350P has no API support recorded for DirectX, OpenGL, or Vulkan, and it has no display outputs. The RTX 5070 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: What are the power requirements?

A: The MI350P has a TDP of 600 W and a suggested PSU of 1000 W. The RTX 5070 Ti has a TDP of 300 W and a suggested PSU of 700 W. Both use one 16-pin power connector.

Q: How does the RTX 5070 Ti compare to its nearest rivals?

A: The RTX 5070 Ti has an average benchmark score of 49957. It is 0.4 percent above the Intel Arc A550M, 3.1 percent above the AMD Radeon RX 6800 XT, 0.1 percent below the AMD Radeon RX Vega 64, and 2 percent below the AMD Radeon RX 6900 XT.

Q: Which card has more shading units?

A: The RTX 5070 Ti has 8960 shading units, compared to 8192 on the MI350P. The MI350P has more texture mapping units at 512 versus 280, but the RTX 5070 Ti has 96 ROPs while the MI350P has zero.

Specification Differences

| Specification | AMD Instinct MI350P | NVIDIA GeForce RTX 5070 Ti |

|---|---|---|

| Architecture | CDNA 4.0 | Blackwell 2.0 |

| Process node | 3 nm | 5 nm |

| Transistors | 73,000 million | 45,600 million |

| Die size | 1190 mm² | 378 mm² |

| Transistor density | 61.3M / mm² | 120.6M / mm² |

| Base clock | 1000 MHz | 2295 MHz |

| Boost clock | 2200 MHz | 2452 MHz |

| Memory size | 144 GB | 16 GB |

| Memory type | HBM3e | GDDR7 |

| Memory bus | 8192 bit | 256 bit |

| Memory bandwidth | 8.19 TB/s | 896.0 GB/s |

| Memory clock | 2000 MHz, 8 Gbps effective | 1750 MHz, 28 Gbps effective |

| Shading units | 8192 | 8960 |

| TMUs | 512 | 280 |

| ROPs | 0 | 96 |

| RT cores | Not listed | 70 |

| Tensor cores | Not listed | 280 |

| Pixel rate | 0 MPixel/s | 235.4 GPixel/s |

| Texture rate | 1,126.4 GTexel/s | 686.6 GTexel/s |

| FP32 | 36.04 TFLOPS | 43.94 TFLOPS |

| FP16 | 36.04 TFLOPS (1:1) | 43.94 TFLOPS (1:1) |

| TDP | 600 W | 300 W |

| Suggested PSU | 1000 W | 700 W |

| Display outputs | No outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1b |

| DirectX | N/A | 12 Ultimate (12_2) |

| OpenGL | N/A | 4.6 |

| Vulkan | N/A | 1.4 |

| Length | 267 mm | 304 mm |

| Height | 111 mm | 137 mm |

| Width | 40 mm | 48 mm |

| Release date | 2026-05-06 | 2025-02-19 |

| Production status | Not recorded | Active |

| Launch MSRP | Not recorded | 749 USD |

The Verdict

The database separates these two products by function rather than by performance ranking. The NVIDIA GeForce RTX 5070 Ti is the only one of the two with recorded benchmark results, an average score of 49957, and an 86th percentile standing. It supports graphics APIs, has display outputs, includes 70 RT cores and 280 tensor cores, and draws 300 W. Its nearest rivals in the database all sit within a few percent of its average score, which places it in a competitive mid-range to upper-mid-range graphics segment.

The AMD Instinct MI350P is a different class of device. It has no display outputs, no graphics API support, no ROPs, and no recorded benchmarks. Its strengths are memory capacity at 144 GB, memory bandwidth at 8.19 TB/s, and a 600 W power envelope paired with a 1000 W suggested PSU. The transistor count of 73,000 million and die size of 1190 mm² indicate a large accelerator built for data-center compute tasks. Its FP32 output of 36.04 TFLOPS is lower than the RTX 5070 Ti's 43.94 TFLOPS, but its memory subsystem is dramatically larger.

A user selecting between these two should base the choice on the workload. The RTX 5070 Ti is the only option with graphics output, API support, and benchmark-verified performance. The MI350P is the only option with high-capacity HBM3e memory and a compute-oriented architecture, but the database contains no performance measurements to validate its capabilities. The MI350P's 50th percentile standing with a zero average score reflects missing data, not a measured result. The RTX 5070 Ti, with its active production status and recorded scores, is the only product in this comparison with verified performance data.