AMD Instinct MI300X vs NVIDIA Tesla V100S PCIe 32 GB Comparison
AMD Instinct MI300X
Tesla V100S PCIe 32 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA Tesla V100S PCIe 32 GB
# AMD Instinct MI300X vs NVIDIA Tesla V100S PCIe 32 GB
The AMD Instinct MI300X is the decisive winner in this comparison, delivering a 63.6% higher Geekbench OpenCL score than the NVIDIA Tesla V100S PCIe 32 GB (317,994 vs 194,415). The MI300X sits at the 100th percentile of all GPUs, while the V100S ranks at the 98th percentile—a narrow percentile gap that belies the substantial raw performance difference. The MI300X's nearest rivals are the NVIDIA B200 (345,482, 8% higher) and H200 NVL (334,891, 5% higher), placing it firmly in the top tier of accelerators. The V100S, by contrast, trades blows with the RTX 6000D (195,964, 0.8% higher) and A100 SXM4 40 GB (187,147, 3.9% lower), showing it remains competitive but dated.
Where Each One Wins
The MI300X wins the only benchmark in the data set, the Geekbench OpenCL test, with a score of 317,994 against 194,415 for the V100S. This is a 63.6% advantage, a margin that is difficult to overstate in accelerator terms. The MI300X's victory is comprehensive, and the data shows no benchmark where the V100S takes the lead.
The V100S's competitive position is better understood through its rival set than through direct comparison with the MI300X. It outperforms the A100 SXM4 40 GB by 3.9% and the RTX 5000 Ada Generation by 5.3%, and it trails the RTX 6000D by just 0.8%. This places the V100S in a performance tier that is roughly one generation behind the current flagship accelerators, whereas the MI300X's rival set consists of NVIDIA's latest B200, H200 NVL, and L40S parts.
For workloads that are memory-bandwidth bound, the MI300X's 5.32 TB/s bandwidth versus the V100S's 1.13 TB/s is a massive differentiator. For compute-bound tasks, the MI300X's 81.72 TFLOPS FP32 and 81.72 TFLOPS FP16 (1:1) dwarf the V100S's 16.35 TFLOPS FP32 and 32.71 TFLOPS FP16 (2:1). The V100S retains one architectural advantage: its 640 tensor cores provide dedicated tensor processing that the MI300X does not specify, though the MI300X's raw FP16 throughput is 2.5 times higher.
Architecture Differences
The MI300X is built on TSMC's 5 nm process with 153,000 million transistors packed into a 1017 mm² die, achieving a transistor density of 150.4M per mm². The V100S uses TSMC's 12 nm process with 21,100 million transistors on an 815 mm² die, for a density of 25.9M per mm². The MI300X integrates nearly 7.3 times as many transistors on a die that is only 25% larger, a signal of the generational leap in manufacturing technology.
The MI300X uses the CDNA 3.0 architecture (chip: Aqua Vanjaram), while the V100S uses the Volta architecture (chip: GV100). The MI300X features 19,456 shading units and 1,216 texture mapping units, compared to 5,120 shading units and 320 TMUs on the V100S. The V100S has 128 ROPs and 640 tensor cores; the MI300X lists zero ROPs and no tensor core count. The MI300X's pixel rate is 0 MPixel/s, reflecting its compute-first design, while the V100S delivers 204.4 GPixel/s.
Memory subsystems are fundamentally different. The MI300X has 192 GB of HBM3 on an 8192-bit bus with 5.32 TB/s bandwidth, while the V100S has 32 GB of HBM2 on a 4096-bit bus with 1.13 TB/s bandwidth. The MI300X offers six times the capacity and 4.7 times the bandwidth. Clock behavior also diverges: the MI300X runs at 1000 MHz base and 2100 MHz boost, whereas the V100S runs at 1245 MHz base and 1597 MHz boost—the V100S has a higher base clock, but the MI300X boosts far higher.
Head-to-Head Benchmarks
The sole head-to-head benchmark, Geekbench OpenCL, shows the MI300X scoring 317,994 against the V100S's 194,415. The 63.6% delta is the largest margin in either GPU's rival list. To put that in context, the MI300X's closest rival, the NVIDIA H200 NVL, scores 334,891—just 5% higher—meaning the MI300X is within striking distance of the H200 while leaving the V100S far behind.
The V100S's competitive context is telling. Its nearest rival, the RTX 6000D, scores 195,964, which is only 0.8% higher. The A100 SXM4 80 GB scores 183,725, which is 5.8% lower. The V100S sits in a cluster of accelerators scoring between roughly 184,000 and 196,000, all within 6% of each other. The MI300X, by contrast, operates in a cluster of 287,000 to 345,000, with its nearest rivals—the L40S (295,763, 7.5% lower) and RTX 6000 Ada Generation (287,237, 10.7% lower)—still far above the V100S's performance class.
In raw throughput terms, the MI300X's FP32 output of 81.72 TFLOPS is 5 times the V100S's 16.35 TFLOPS. The FP16 comparison is also stark: the MI300X delivers 81.72 TFLOPS at a 1:1 ratio, while the V100S delivers 32.71 TFLOPS at a 2:1 ratio. The texture rate difference is equally pronounced—2,553.6 GTexel/s versus 511.0 GTexel/s, a 5-fold gap.
Specification Differences
| Specification | AMD Instinct MI300X | NVIDIA Tesla V100S PCIe 32 GB |
|---|---|---|
| Architecture | CDNA 3.0 | Volta |
| Process Node | 5 nm | 12 nm |
| Transistors | 153,000 million | 21,100 million |
| Die Size | 1017 mm² | 815 mm² |
| Transistor Density | 150.4M / mm² | 25.9M / mm² |
| Base Clock | 1000 MHz | 1245 MHz |
| Boost Clock | 2100 MHz | 1597 MHz |
| Memory Size | 192 GB | 32 GB |
| Memory Type | HBM3 | HBM2 |
| Memory Bus Width | 8192 bit | 4096 bit |
| Memory Bandwidth | 5.32 TB/s | 1.13 TB/s |
| Shading Units | 19,456 | 5,120 |
| TMUs | 1,216 | 320 |
| ROPs | 0 | 128 |
| Tensor Cores | Not specified | 640 |
| FP32 Performance | 81.72 TFLOPS | 16.35 TFLOPS |
| FP16 Performance | 81.72 TFLOPS (1:1) | 32.71 TFLOPS (2:1) |
| Pixel Rate | 0 MPixel/s | 204.4 GPixel/s |
| Texture Rate | 2,553.6 GTexel/s | 511.0 GTexel/s |
| TDP | 750 W | 250 W |
| Slot Width | OAM Module | Dual-slot |
| Power Connectors | None | 2x 8-pin |
| Suggested PSU | 1150 W | 600 W |
| Bus Interface | PCIe 5.0 x16 | PCIe 3.0 x16 |
| DirectX Support | N/A | 12 (12_1) |
| OpenGL Support | N/A | 4.6 |
| Vulkan Support | N/A | 1.4 |
| Release Date | 2023-12-05 | 2019-11-25 |
| Production Status | Not specified | End-of-life |
The MI300X is a newer product by roughly four years, and the specification table shows a complete generational overhaul. The V100S retains API support (DirectX 12, OpenGL 4.6, Vulkan 1.4) while the MI300X lists no API support, reflecting its compute-only orientation. The V100S is end-of-life, while the MI300X's production status is unspecified.
FAQ
Q: Which GPU has the higher Geekbench OpenCL score?
A: The AMD Instinct MI300X scores 317,994, which is 63.6% higher than the NVIDIA Tesla V100S PCIe 32 GB's 194,415.
Q: How does the memory capacity compare?
A: The MI300X has 192 GB of HBM3 memory, while the V100S has 32 GB of HBM2. The MI300X also has a wider 8192-bit bus versus 4096-bit, and higher bandwidth at 5.32 TB/s versus 1.13 TB/s.
Q: Does the V100S have any architectural advantage?
A: The V100S has 640 tensor cores and 128 ROPs, while the MI300X lists no tensor cores and zero ROPs. The V100S also supports DirectX 12, OpenGL 4.6, and Vulkan 1.4, whereas the MI300X lists no API support.
Q: What is the FP32 performance difference?
A: The MI300X delivers 81.72 TFLOPS FP32, exactly 5 times the V100S's 16.35 TFLOPS. The texture rate difference is also 5-fold: 2,553.6 GTexel/s versus 511.0 GTexel/s.
Q: How do the power requirements differ?
A: The MI300X has a 750 W TDP with a suggested 1150 W PSU and uses an OAM Module form factor with no power connectors. The V100S has a 250 W TDP with a suggested 600 W PSU, uses a dual-slot design, and requires 2x 8-pin power connectors.
Q: Where does each GPU rank among all GPUs?
A: The MI300X is at the 100th percentile, while the V100S is at the 98th percentile. The MI300X's nearest rivals include the NVIDIA H200 NVL (334,891) and B200 (345,482), while the V100S's nearest rivals include the RTX 6000D (195,964) and A100 SXM4 40 GB (187,147).
The Verdict
The data is unambiguous: the AMD Instinct MI300X outperforms the NVIDIA Tesla V100S PCIe 32 GB by 63.6% in the single available benchmark, and the specification gap supports this result across every meaningful compute metric. The MI300X offers 5 times the FP32 throughput, 5 times the texture rate, 6 times the memory capacity, and 4.7 times the memory bandwidth. It is built on a 5 nm process with 7.3 times the transistor count and a 5.8 times higher transistor density.
For organizations running large-scale AI training or inference workloads, the MI300X's 192 GB HBM3 memory and 5.32 TB/s bandwidth make it the clear choice—the V100S's 32 GB HBM2 would require significantly more parallelism to handle the same working sets. The MI300X's 100th percentile ranking versus the V100S's 98th percentile underscores its position among the fastest accelerators available.
The V100S retains relevance only in specific scenarios. Its 250 W TDP and 600 W suggested PSU make it far more power-efficient per watt in absolute terms, and its dual-slot PCIe form factor with 2x 8-pin connectors is easier to deploy in standard servers than the MI300X's OAM module. The V100S also supports graphics APIs (DirectX 12, OpenGL 4.6, Vulkan 1.4) that the MI300X lacks entirely, making it the only option here for any workload requiring those interfaces. Its 640 tensor cores provide a hardware tensor path, although the MI300X's raw FP16 throughput of 81.72 TFLOPS exceeds the V100S's 32.71 TFLOPS regardless.
The V100S is end-of-life, while the MI300X represents current-generation technology. For new deployments, the MI300X is the superior choice by every measured performance metric. The V100S should only be considered for legacy compatibility, power-constrained environments, or applications that require graphics API support. Anyone comparing these two accelerators for modern compute workloads should treat the 63.6% benchmark delta as the deciding factor—the MI300X is in a different performance class entirely.