AMD Instinct MI300X vs NVIDIA Tesla V100 SXM2 32 GB Comparison

AMD
RADEON

AMD Instinct MI300X

CORE STATE Aqua Vanjaram
VRAM 192 GB
CLOCK SPEED 2100 MHz
TDP 750 W
BUS WIDTH 8192 bit
ARCHITECTURE CDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

Tesla V100 SXM2 32 GB

CORE STATE GV100
VRAM 32 GB
CLOCK SPEED 1530 MHz
TDP 250 W
BUS WIDTH 4096 bit
ARCHITECTURE Volta
nm
PROCESS 12 nm
LAUNCH DATE 2018

PERFORMANCE BENCHMARKS

geekbench_opencl
317,994
131,696
geekbench_vulkan
N/A
143,765

Analysis: AMD Instinct MI300X vs NVIDIA Tesla V100 SXM2 32 GB

The AMD Instinct MI300X and NVIDIA Tesla V100 SXM2 32 GB represent two distinct eras of accelerator design. The data shows a decisive generational gap: the MI300X scores 317,994 in Geekbench OpenCL, a 141.5% advantage over the V100’s 131,696 in the same test. The MI300X sits at the 100th percentile of all GPUs, while the V100, despite being end-of-life, still holds the 96th percentile. The verdict is clear: the MI300X is the overwhelming performance leader, but the V100 remains a relevant legacy option for specific workloads where its architecture and efficiency profile still apply.

The Verdict — For any new deployment requiring maximum compute throughput, the AMD Instinct MI300X is the only rational choice from this data. Its 317,994 OpenCL score places it 7.5% ahead of the NVIDIA L40S and 10.7% ahead of the NVIDIA RTX 6000 Ada Generation, making it a top-tier accelerator even among modern rivals. The Tesla V100 SXM2 32 GB, with its 131,696 OpenCL score, is 0.9% behind the AMD Instinct MI100 and 1.4% ahead of the AMD Radeon Pro W6800X Duo, indicating it still competes with older-generation hardware. However, the V100’s 96th percentile ranking shows it is by no means obsolete; it can still handle substantial compute tasks. Choose the MI300X for raw performance and future-proofing. Choose the V100 only if the workload is explicitly optimized for Volta’s tensor cores or if the 250 W power envelope is a hard constraint, as the MI300X requires 750 W and a 1150 W suggested PSU.

Where Each One Wins — The benchmark results show a single head-to-head test, and the MI300X wins it outright. In Geekbench OpenCL, the MI300X delivers 317,994 points versus the V100’s 131,696, a 141.5% delta. This is not a close contest; it is a generational blowout. The MI300X’s win is attributable to its massively larger compute resources and memory subsystem. The V100 does have a win in a different domain: its 640 tensor cores and 2:1 FP16 ratio (31.33 TFLOPS) provide a specialized advantage for AI inference workloads that leverage mixed-precision, a feature the MI300X does not expose as tensor cores in the data. Additionally, the V100’s 12 nm process and 250 W TDP make it a far more manageable integration for existing infrastructure, whereas the MI300X’s 750 W TDP and OAM module form factor require a specialized chassis. For pure FP32 compute, the MI300X’s 81.72 TFLOPS dwarfs the V100’s 15.67 TFLOPS, making it the winner for scientific simulation and rendering tasks that rely on single-precision math.

Architecture Differences — The architectural gap is stark. The MI300X uses the CDNA 3.0 architecture on a 5 nm TSMC process, packing 153,000 million transistors into a 1017 mm² die. The V100 uses the older Volta architecture on a 12 nm process, with 21,100 million transistors on an 815 mm² die. This translates to a transistor density of 150.4M per mm² for the MI300X versus 25.9M per mm² for the V100, a 5.8x density advantage. The MI300X features 19,456 shading units and 1,216 TMUs, while the V100 has 5,120 shading units and 320 TMUs. Memory is another differentiator: the MI300X offers 192 GB of HBM3 on a 8192-bit bus with 5.32 TB/s bandwidth, while the V100 offers 32 GB of HBM2 on a 4096-bit bus with 898.0 GB/s bandwidth. The MI300X’s memory bandwidth is nearly 6x higher, and its capacity is 6x larger. Clock speeds tell a nuanced story: the V100 has a higher base clock (1290 MHz vs 1000 MHz) but a lower boost clock (1530 MHz vs 2100 MHz), indicating the MI300X is designed for sustained high-frequency bursts. The MI300X has no ROPs and a 0 MPixel/s pixel rate, as it is a pure compute accelerator, while the V100 retains 128 ROPs and a 195.8 GPixel/s pixel rate. The MI300X uses PCIe 5.0 x16, while the V100 uses PCIe 3.0 x16, halving the potential host interface bandwidth. The V100 supports DirectX 12, OpenGL 4.6, and Vulkan 1.4, whereas the MI300X reports N/A for all graphics APIs, confirming it is not intended for display output. Finally, the V100 has a 250 W TDP with a 600 W suggested PSU, while the MI300X has a 750 W TDP with a 1150 W suggested PSU.

FAQ

Q: How much faster is the AMD Instinct MI300X than the NVIDIA Tesla V100 SXM2 32 GB in OpenCL?

A: The MI300X scores 317,994, which is 141.5% higher than the V100’s 131,696 in the Geekbench OpenCL test.

Q: What is the memory capacity and bandwidth difference between the two?

A: The MI300X has 192 GB of HBM3 with 5.32 TB/s bandwidth, whereas the V100 has 32 GB of HBM2 with 898.0 GB/s bandwidth. The MI300X offers 6x the capacity and roughly 5.9x the bandwidth.

Q: Does the Tesla V100 support modern graphics APIs?

A: Yes, the V100 supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The MI300X reports N/A for all these APIs, as it is a compute-only accelerator with no display outputs.

Q: Which card has a higher transistor density?

A: The MI300X has a density of 150.4M transistors per mm², compared to the V100’s 25.9M per mm², a 5.8x difference due to the 5 nm versus 12 nm process nodes.

Q: How does the MI300X compare to its nearest rivals?

A: The MI300X is 5% behind the NVIDIA H200 NVL and 8% behind the NVIDIA B200, but it is 7.5% ahead of the NVIDIA L40S and 10.7% ahead of the NVIDIA RTX 6000 Ada Generation.

Q: What is the power requirement difference?

A: The V100 has a 250 W TDP with a 600 W suggested PSU, while the MI300X has a 750 W TDP with a 1150 W suggested PSU. The MI300X requires nearly double the power supply headroom.

Head-to-Head Benchmarks — The only direct benchmark comparison available is Geekbench OpenCL, and it is a landslide. The MI300X posts 317,994 points, a 141.5% improvement over the V100’s 131,696. To put that in perspective, the MI300X’s score is more than double the V100’s, and its 100th percentile ranking versus the V100’s 96th percentile shows the gap is not just about age but about absolute capability. The MI300X’s victory is driven by its 81.72 TFLOPS FP32 throughput, which is 5.2x the V100’s 15.67 TFLOPS. In memory-bound workloads, the MI300X’s 5.32 TB/s bandwidth versus 898.0 GB/s means it can feed its compute units far more effectively. The V100’s only counterpoints are its tensor cores and higher base clock. With 640 tensor cores, the V100 can accelerate certain deep learning operations, and its 1290 MHz base clock is 29% higher than the MI300X’s 1000 MHz, allowing it to maintain performance in power-constrained scenarios. However, the MI300X’s boost clock of 2100 MHz exceeds the V100’s 1530 MHz by 37%, ensuring peak performance is far superior. The data shows no scenario where the V100 wins a general compute benchmark; its advantages are niche and architectural, not empirical in the provided results. For any user comparing raw numbers, the MI300X is the definitive winner, with the V100 serving as a legacy reference point rather than a competitive alternative.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI300X
Tesla V100 SXM2 32 GB
Core Specs
Shading Units
19,456
5,120 -73.7%
Shaders
19,456
5,120 -73.7%
TMUs
1,216
320 -73.7%
ROPs
0
128 +∞%
Compute Units
304
—
SM Count
—
80
Clocks
Base Clock
1000 MHz
1290 MHz
Boost Clock
2100 MHz
1530 MHz
Memory Clock
1300 MHz 5.2 Gbps effective
877 MHz 1754 Mbps effective
Memory
Memory Size
192 GB
32 GB
VRAM (MB)
196,608
32,768 -83.3%
Memory Type
HBM3
HBM2
Memory Bus
8192 bit
4096 bit
Bandwidth
5.32 TB/s
898.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
16 MB
6 MB
L3 Cache
256 MB
—
Performance
Pixel Rate
0 MPixel/s
195.8 GPixel/s
Texture Rate
2,553.6 GTexel/s
489.6 GTexel/s
FP32 (TFLOPS)
81.72 TFLOPS
15.67 TFLOPS
FP64 (TFLOPS)
40.86 TFLOPS (1:2)
7.834 TFLOPS (1:2)
FP16 (TFLOPS)
81.72 TFLOPS (1:1)
31.33 TFLOPS (2:1)
AI/RT
Tensor Cores
—
640
Matrix Cores
1,216
—
Power
TDP
750 W
250 W
TDP (W)
750
250 -66.7%
Suggested PSU
1150 W
600 W
Power Connectors
None
None
Architecture
Architecture
CDNA 3.0
Volta
GPU Name
Aqua Vanjaram
GV100
Generation
Instinct (MIx)
Tesla Volta (Vxx)
Process Size
5 nm
12 nm
Transistors
153,000 million
21,100 million
Die Size
1017 mm²
815 mm²
Foundry
TSMC
TSMC
Density
150.4M / mm²
25.9M / mm²
AMD MCM
MCM
2
—
API Support
DirectX
—
12 (12_1)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
7.0
Shader Model
—
6.8
Physical
Slot Width
OAM Module
SXM Module
Outputs
No outputs
No outputs
Bus Interface
PCIe 5.0 x16
PCIe 3.0 x16
Other
Production
—
End-of-life
Predecessor
Radeon Instinct
Tesla Pascal
Successor
—
Tesla Turing
View Instinct MI300X Details View Tesla V100 SXM2 32 GB Details