AMD Instinct MI300X vs NVIDIA Tesla V100 SXM2 16 GB Comparison
AMD Instinct MI300X
Tesla V100 SXM2 16 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA Tesla V100 SXM2 16 GB
Head-to-Head Benchmarks
The recorded data contains one direct head-to-head benchmark between the AMD Instinct MI300X and the NVIDIA Tesla V100 SXM2 16 GB: Geekbench OpenCL. In this test, the MI300X delivers a score of 317,994, while the V100 SXM2 manages 87,454. That results in a delta of 263.6%, meaning the MI300X is more than 3.6 times faster in raw OpenCL compute throughput. This is not a marginal victory; it is a generational gap expressed in a single number.
To contextualize the MI300X score, the database places it at the 100th percentile among all GPUs. Its nearest rivals in the database include the NVIDIA B200 at 345,482 (8% higher), the NVIDIA H200 NVL at 334,891 (5% higher), the NVIDIA L40S at 295,763 (7.5% lower), and the NVIDIA RTX 6000 Ada Generation at 287,237 (10.7% lower). The MI300X sits comfortably in the top tier of accelerator-class hardware, trailing only the newest NVIDIA data center parts.
The V100 SXM2, by contrast, sits at the 95th percentile, a strong position for a 2017-era product. Its nearest rivals include the NVIDIA RTX 4000 SFF Ada Generation (117,088, 2.3% higher), the NVIDIA GB10 (117,393, 2.6% higher), the NVIDIA RTX A5500 Mobile (113,944, 0.4% lower), and the AMD Radeon PRO W7900 (110,725, 3.3% lower). The V100’s average benchmark score is 114,395, which is only about one-third of the MI300X’s 317,994. The head-to-head delta of 263.6% is the only direct comparison available, and it overwhelmingly favors the MI300X.
The V100 does have a Vulkan score of 141,336 in the database, but the MI300X has no Vulkan result listed. That is a notable absence. In OpenCL, the only shared test, the MI300X is decisively ahead. The data does not show any benchmark where the V100 wins against the MI300X. The wins count is 1 for the MI300X and 0 for the V100. This is a one-sided comparison in every measured metric.
Architecture Differences
The two accelerators are separated by six years of design and two distinct architectural philosophies. The MI300X uses the CDNA 3.0 architecture, codenamed Aqua Vanjaram, built on a 5 nm TSMC process. The V100 SXM2 uses the Volta architecture with the GV100 chip, built on a 12 nm TSMC process. The process node difference is critical: 5 nm versus 12 nm directly affects transistor density. The MI300X packs 153,000 million transistors onto a 1017 mm² die, resulting in a density of 150.4 million transistors per square millimeter. The V100 has 21,100 million transistors on an 815 mm² die, a density of 25.9 million per square millimeter. That is 5.8 times higher density on the MI300X.
Memory is another chasm. The MI300X has 192 GB of HBM3 with an 8192-bit bus and 5.32 TB/s of bandwidth. The V100 has 16 GB of HBM2 with a 4096-bit bus and 897.0 GB/s of bandwidth. The MI300X holds 12 times more memory and delivers roughly 5.9 times the bandwidth. The MI300X memory clock runs at 1300 MHz (5.2 Gbps effective), while the V100 memory runs at 876 MHz (1752 Mbps effective). For large model inference or massive datasets, the MI300X’s capacity is clearly the differentiator.
Compute resources differ drastically. The MI300X has 19,456 shading units, 1,216 texture mapping units, and zero ROPs, a typical configuration for a compute-focused accelerator. The V100 has 5,120 shading units, 320 TMUs, 128 ROPs, and 640 tensor cores. The V100 also lists a pixel rate of 195.8 GPixel/s and a texture rate of 489.6 GTexel/s. The MI300X lists a texture rate of 2,553.6 GTexel/s and a pixel rate of 0 MPixel/s, the latter indicating no rasterization output stage. The MI300X’s FP32 throughput is 81.72 TFLOPS, and its FP16 throughput is the same at 81.72 TFLOPS (1:1 ratio). The V100’s FP32 is 15.67 TFLOPS, with FP16 at 31.33 TFLOPS (2:1 ratio). The MI300X is more than 5 times faster in FP32 and 2.6 times faster in FP16.
Clock speeds tell a different story. The V100 has a base clock of 1312 MHz and a boost of 1530 MHz, while the MI300X has a base of 1000 MHz and a boost of 2100 MHz. The V100’s higher base clock is irrelevant given the MI300X’s enormous shader count and boost headroom. Power envelopes also differ: the MI300X has a TDP of 750 W with a suggested PSU of 1150 W, while the V100 has a TDP of 250 W with a suggested PSU of 600 W. The MI300X uses an OAM module slot, the V100 uses an SXM module slot. Neither card has display outputs, and the MI300X has no API support for DirectX, OpenGL, or Vulkan, while the V100 supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The V100 also has a production status of end-of-life, while the MI300X has no such status listed. The MI300X was released in December 2023, the V100 in June 2017.
The Verdict
The data is unambiguous: the AMD Instinct MI300X is the far more capable accelerator in raw compute and memory capacity. In the only shared benchmark, it leads by 263.6%. Its FP32 throughput is 5.2 times higher, its memory bandwidth is 5.9 times higher, and its memory capacity is 12 times higher. For any workload that fits in the V100’s 16 GB frame, the MI300X still dominates in speed. For workloads that exceed 16 GB, the V100 cannot even run them, making the MI300X the only option in this comparison.
The V100’s strengths lie elsewhere. It is a legacy part with a lower TDP (250 W vs 750 W), a smaller suggested PSU (600 W vs 1150 W), and it supports Vulkan in addition to OpenCL. It also has tensor cores, which the MI300X does not list. The V100’s Vulkan score of 141,336 indicates it can handle graphics-adjacent tasks, while the MI300X has no API support at all. The V100 also has a pixel rate, whereas the MI300X has zero pixel output.
The verdict: pick the MI300X if you need maximum compute capacity, huge memory, and current-generation performance. Pick the V100 if you require Vulkan support, have strict power limits, or need to run legacy workloads that don’t scale beyond 16 GB. The V100 is end-of-life, though, so new deployments would favor the MI300X. The data shows a clear winner for modern high-performance computing: the MI300X, with a 263.6% advantage in the only direct test.
FAQ
Q: Which GPU has a higher Geekbench OpenCL score?
A: The AMD Instinct MI300X scores 317,994, while the NVIDIA Tesla V100 SXM2 16 GB scores 87,654. The MI300X leads by 263.6%.
Q: How does the memory capacity of the two compare?
A: The MI300X has 192 GB of HBM3, 24 times the V100’s 16 GB of HBM2. The memory bandwidth is 5.32 TB/s on the MI300X versus 897 GB/s on the V100.
Q: Does the V100 support Vulkan?
A: Yes, the V100 has a Vulkan score of 141,336 in the database. The MI300X has no Vulkan API support listed (it has N/A for Vulkan, OpenGL, and DirectX).
Q: What is the TDP difference?
A: The MI300X has a TDP of 750 W with a suggested PSU of 1150 W. The V100 has a TDP of 250 W with a suggested PSU of 600 W.
Q: Which GPU has more shading units?
A: The MI300X has 19,456 shading units, while the V100 has 5,120. The MI300X also has 1,216 texture units versus 320 on the V100.
Q: Is the V100 still in production?
A: The database lists the V100’s production status as end-of-life. The MI300X has no production status listed, meaning it is not marked as discontinued.
Where Each One Wins
AMD Instinct MI300X Wins: Compute-bound benchmarks. The OpenCL score is 263.6% higher. It has 153,000 million transistors on a 5 nm process, delivering an FP32 throughput of 81.72 TFLOPS, which is 5.2 times the V100’s 15.67 TFLOPS. Its 192 GB HBM3 pool is the obvious choice for large language models, scientific simulation, or any dataset exceeding 16 GB. The 5.32 TB/s bandwidth is a massive advantage for memory-hungry applications. The MI300X also has a higher boost clock (2100 MHz vs 1530 MHz), more texture units (1,216 vs 320), and a higher texture rate (2,553.6 GTexel/s vs 489.6 GTexel/s). For pure compute density, the MI300X wins every measurable metric in the database.
NVIDIA Tesla V100 SXM2 16 GB Wins:
The V100 wins in specific compatibility and legacy scenarios. It supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, while the MI300X has N/A for all three APIs. The V500 has a Vulkan score of 141,336, indicating it can handle graphics and compute workloads that require those APIs. The V100 also has 640 tensor cores, which the MI300X does not list. In power efficiency, the V100’s 250 W TDP is one-third of the MI300X’s 750 W, and its suggested PSU is 600 W versus 1150 W. For a system with strict power limits, the V100 is the more manageable option. The V100 also has a pixel rate of 195.8 GPixel/s and 128 ROPs, while the MI300X has 0 ROPs and 0 MPixel/s, so the V100 is better for any rasterization workload. The V100’s base clock is higher at 1312 MHz vs 1000 MHz, though its boost clock is lower (1530 MHz vs 2100 MHz). Finally, the V100’s PCIe 3.0 x16 interface may be more compatible with older systems, while the MI300X uses PCIe 5.0 x16.
The Data-Driven Choice:
The database records a single head-to-head test, and the MI300X wins by 263.6%. The MI300X is also at the 100th percentile of all GPUs, while the V100 is at the 95th percentile. The V100’s nearest rivals are all within 3.3% of its score, indicating it is a competent but not exceptional part today. The MI300X’s nearest rivals are all within 10.7%, meaning it competes with the fastest GPUs in the database. Use the MI300X for modern high-performance tasks and hardware. Use the V100 for legacy API support, low-power constraints, or rasterization. The data favors the MI300X overwhelmingly.