AMD Instinct MI300X vs NVIDIA RTX PRO 6000 Blackwell Max-Q Comparison

AMD
RADEON

AMD Instinct MI300X

CORE STATE Aqua Vanjaram
VRAM 192 GB
CLOCK SPEED 2100 MHz
TDP 750 W
BUS WIDTH 8192 bit
ARCHITECTURE CDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

RTX PRO 6000 Blackwell Max-Q

CORE STATE GB202
VRAM 96 GB
CLOCK SPEED 2280 MHz
TDP 300 W
BUS WIDTH 512 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
317,994
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
11,088

Analysis: AMD Instinct MI300X vs NVIDIA RTX PRO 6000 Blackwell Max-Q

The AMD Instinct MI300X and NVIDIA RTX PRO 6000 Blackwell Max-Q occupy different corners of the professional accelerator market, and the recorded data reflects that split. The MI300X is a massive compute-focused module with 192 GB of HBM3 memory and a 750 W power envelope, built for high-throughput workloads. The RTX PRO 6000 Blackwell Max-Q is a dual-slot, 300 W workstation card with 96 GB of GDDR7, a full display output suite, and full API support. Benchmark results are not directly comparable across the two, as each was measured with a different test, but the database reveals how each positions itself relative to its own nearest rivals.

FAQ

Q: What is the memory configuration difference between the two accelerators?

A: The AMD Instinct MI300X uses 192 GB of HBM3 across a 8192-bit bus, delivering 5.32 TB/s of bandwidth. The NVIDIA RTX PRO 6000 Blackwell Max-Q uses 96 GB of GDDR7 on a 512-bit bus, providing 1.79 TB/s.

Q: Which card has higher FP32 compute?

A: The NVIDIA RTX PRO 6000 Blackwell Max-Q delivers 109.7 TFLOPS of FP32, which is higher than the MI300X's 81.72 TFLOPS. The NVIDIA card also matches that figure for FP16, while the MI300X offers 81.72 TFLOPS for FP16 as well.

Q: How do the two compare on power consumption?

A: The AMD part has a TDP of 750 W and requires a suggested power supply of 1150 W. The NVIDIA card has a TDP of 300 W with a suggested power supply of 700 W, and it uses a single 16-pin power connector.

Q: What is the launch MSRP of the NVIDIA RTX PRO 6000 Blackwell Max-Q?

A: The launch MSRP is 8,565 USD. The AMD Instinct MI300X has no launch MSRP listed in the database.

Q: Which card displays video output?

A: The NVIDIA RTX PRO 6000 Blackwell Max-Q has 4x DisplayPort 2.1b outputs. The AMD Instinct MI300X has no display outputs.

Q: What are the production statuses of the two products?

A: The NVIDIA RTX PRO 6000 Blackwell Max-Q is listed as Active. The AMD Instinct MI300X has no production status recorded in the database.

Architecture Differences

The two accelerators are built on different architectures and for different roles. The AMD Instinct MI300X uses the CDNA 3.0 architecture, while the NVIDIA RTX PRO 6000 Blackwell Max-Q uses Blackwell 2.0. Both are fabricated on a 5 nm process at TSMC, but the similarities end there.

The AMD chip, codenamed Aqua Vanjaram, packs 153,000 million transistors on a 1017 mm² die, yielding a transistor density of 150.4M per mm². The NVIDIA chip, GB202, contains 92,200 million transistors on a 750 mm² die, with a density of 122.9M per mm². The AMD die is larger by 267 mm² and carries roughly 60,800 million more transistors.

Compute resources differ substantially. The MI300X has 19,456 shading units and 1,216 texture mapping units, but no ROPs, no RT cores, and no tensor cores are listed. The RTX PRO 6000 Blackwell Max-Q has 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores. The NVIDIA card therefore carries dedicated ray tracing and tensor hardware, while the AMD part relies entirely on its shading and texture units.

Clock speeds are close at the base level: 1000 MHz for the AMD part and 1035 MHz for the NVIDIA card. The boost clocks differ more, with the MI300X reaching 2100 MHz and the RTX PRO 6000 Blackwell Max-Q reaching 2280 MHz. Memory clocks also differ, with the AMD part running at 1300 MHz (5.2 Gbps effective) and the NVIDIA card at 1750 MHz (28 Gbps effective).

API support is a major divider. The AMD Instinct MI300X lists DirectX, OpenGL, and Vulkan as N/A. The NVIDIA RTX PRO 6000 Blackwell Max-Q supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The NVIDIA card also provides display outputs, while the AMD module has none.

Physical design follows the compute versus workstation split. The MI300X is an OAM module with no power connectors and no listed dimensions. The RTX PRO 6000 Blackwell Max-Q is a dual-slot card measuring 267 mm in length, 111 mm in height, and 40 mm in width, with a single 16-pin power connector.

Head-to-Head Benchmarks

The database records a single benchmark for each product, and they are not the same test. The AMD Instinct MI300X was measured with Geekbench OpenCL, scoring 317,994 points, while the NVIDIA RTX PRO 6000 Blackwell Max-Q was measured with 3DMark Steel Nomad DX12, scoring 11,088 points. A direct cross-test comparison is not possible, but the nearest rival data for each card provides context.

The MI300X sits at the 100th percentile among all GPUs in the database. Its average benchmark score is 317,994. Its nearest rival, the NVIDIA H200 NVL, posts an average score of 334,891, which is 5% higher. The NVIDIA B200 is 8% higher with 345,482 points. The AMD part beats the NVIDIA L40S (295,763 points) by 7.5% and the NVIDIA RTX 6000 Ada Generation (287,237 points) by 10.7%. This indicates that the MI300X is competitive with the top accelerators in the database, though it trails the H200 NVL and B200 by single-digit percentages.

The RTX PRO 6000 Blackwell Max-Q sits at the 50th percentile among all GPUs. Its average benchmark score is 11,088. Its nearest rival is the NVIDIA RTX PRO 6000D Blackwell Max-Q, which scores identically at 11,088, a 0% delta. The AMD Radeon RX 550 is 0.1% behind at 11,075, and the NVIDIA GeForce GTX 1650 SUPER is 0.4% behind at 11,047. The AMD FirePro W4300 is ahead by 1.2% with 11,225 points. The data shows that the RTX PRO 6000 Blackwell Max-Q, in this particular DX12 workload, performs at a level comparable to much lower-end consumer and workstation cards, which is an unusual result for a professional product and likely reflects the specific demands of the Steel Nomad test rather than general compute capability.

The MI300X, by contrast, dominates its own benchmark category. A 7.5% lead over the L40S and a 10.7% lead over the RTX 6000 Ada Generation show clear strength in OpenCL compute. The 5% and 8% deficits to the H200 NVL and B200, respectively, place it just below the top accelerators in the database.

The Verdict

The data points to two different buying decisions. The AMD Instinct MI300X is a high-throughput compute accelerator for large-scale workloads. Its 192 GB of HBM3 memory, 5.32 TB/s bandwidth, and 750 W power envelope indicate a design for memory-heavy, compute-intensive tasks such as large model training or inference. Its 100th percentile ranking and strong scores against the L40S and RTX 6000 Ada Generation confirm that it is among the fastest accelerators in the database for OpenCL workloads. The lack of display outputs and API support makes it unsuitable for a workstation environment.

The NVIDIA RTX PRO 6000 Blackwell Max-Q is a workstation card with a 300 W power draw, a dual-slot form factor, 4x DisplayPort 2.1b outputs, and full DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 support. It carries 96 GB of GDDR7 memory and 1.79 TB/s of bandwidth, along with dedicated RT and tensor cores. Its 50th percentile ranking and the Steel Nomad DX12 score place it in a different performance class for that specific test, but the listed specifications make it the only one of the two that can drive displays and run graphics APIs. The MI300X cannot be used for any standard graphics workload, while the RTX PRO 6000 Blackwell Max-Q is a complete workstation solution.

For users whose work is purely compute and memory bound, with no need for display output, the MI300X offers a larger memory pool, higher bandwidth, and a top-tier percentile ranking. For users who need a dual-slot card that fits a workstation, supports standard graphics APIs, and provides display outputs, the RTX PRO 6000 Blackwell Max-Q is the only choice from this pair. The power requirements also differ: the MI300X requires a 1150 W power supply, while the NVIDIA card requires 700 W.

Specification Differences

The two products differ on nearly every specification field in the database.

  • Chip: AMD uses Aqua Vanjaram; NVIDIA uses GB202.
  • Architecture: CDNA 3.0 versus Blackwell 2.0.
  • Generation: Instinct (MIx) versus Blackwell PRO W (x000).
  • Transistors: 153,000 million versus 92,200 million.
  • Die size: 1017 mm² versus 750 mm².
  • Transistor density: 150.4M per mm² versus 122.9M per mm².
  • Base clock: 1000 MHz versus 1035 MHz.
  • Boost clock: 2100 MHz versus 2280 MHz.
  • Memory clock: 1300 MHz (5.2 Gbps effective) versus 1750 MHz (28 Gbps effective).
  • Memory size: 192 GB versus 96 GB.
  • Memory type: HBM3 versus GDDR7.
  • Memory bus width: 8192 bit versus 512 bit.
  • Memory bandwidth: 5.32 TB/s versus 1.79 TB/s.
  • Shading units: 19,456 versus 24,064.
  • TMUs: 1,216 versus 752.
  • ROPs: 0 versus 192.
  • RT cores: None listed versus 188.
  • Tensor cores: None listed versus 752.
  • Pixel rate: 0 MPixel/s versus 437.8 GPixel/s.
  • Texture rate: 2,553.6 GTexel/s versus 1,714.6 GTexel/s.
  • FP32 compute: 81.72 TFLOPS versus 109.7 TFLOPS.
  • FP16 compute: 81.72 TFLOPS versus 109.7 TFLOPS.
  • TDP: 750 W versus 300 W.
  • Slot width: OAM Module versus Dual-slot.
  • Power connectors: None versus 1x 16-pin.
  • Suggested PSU: 1150 W versus 700 W.
  • Display outputs: No outputs versus 4x DisplayPort 2.1b.
  • DirectX support: N/A versus 12 Ultimate (12_2).
  • OpenGL support: N/A versus 4.6.
  • Vulkan support: N/A versus 1.4.
  • Dimensions: None listed versus 267 mm by 111 mm by 40 mm.
  • Production status: None listed versus Active.
  • Release date: 2023-12-05 versus 2025-03-17.
  • Predecessor: Radeon Instinct versus Workstation Ada.
  • Launch MSRP: None versus 8,565 USD.
  • Benchmark score: 317,994 (Geekbench OpenCL) versus 11,088 (3DMark Steel Nomad DX12).
  • Percentile: 100 versus 50.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI300X
RTX PRO 6000 Blackwell Max-Q
Core Specs
Shading Units
19,456
24,064 +23.7%
Shaders
19,456
24,064 +23.7%
TMUs
1,216
752 -38.2%
ROPs
0
192 +∞%
Compute Units
304
—
SM Count
—
188
Clocks
Base Clock
1000 MHz
1035 MHz
Boost Clock
2100 MHz
2280 MHz
Memory Clock
1300 MHz 5.2 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
192 GB
96 GB
VRAM (MB)
196,608
98,304 -50.0%
Memory Type
HBM3
GDDR7
Memory Bus
8192 bit
512 bit
Bandwidth
5.32 TB/s
1.79 TB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
16 MB
128 MB
L3 Cache
256 MB
—
Performance
Pixel Rate
0 MPixel/s
437.8 GPixel/s
Texture Rate
2,553.6 GTexel/s
1,714.6 GTexel/s
FP32 (TFLOPS)
81.72 TFLOPS
109.7 TFLOPS
FP64 (TFLOPS)
40.86 TFLOPS (1:2)
1.715 TFLOPS (1:64)
FP16 (TFLOPS)
81.72 TFLOPS (1:1)
109.7 TFLOPS (1:1)
AI/RT
RT Cores
—
188
Tensor Cores
—
752
Matrix Cores
1,216
—
Power
TDP
750 W
300 W
TDP (W)
750
300 -60.0%
Suggested PSU
1150 W
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
CDNA 3.0
Blackwell 2.0
GPU Name
Aqua Vanjaram
GB202
Generation
Instinct (MIx)
Blackwell PRO W (x000)
Process Size
5 nm
5 nm
Transistors
153,000 million
92,200 million
Die Size
1017 mm²
750 mm²
Foundry
TSMC
TSMC
Density
150.4M / mm²
122.9M / mm²
AMD MCM
MCM
2
—
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
12.0
Shader Model
—
6.9
Physical
Slot Width
OAM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
4x DisplayPort 2.1b
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Launch Price
—
8,565 USD
Production
—
Active
Predecessor
Radeon Instinct
Workstation Ada
View Instinct MI300X Details View RTX PRO 6000 Blackwell Max-Q Details