AMD Instinct MI300X vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
AMD Instinct MI300X
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA RTX PRO 5000 72 GB Blackwell
Head-to-Head Benchmarks
The recorded data shows two accelerators with fundamentally different measurement profiles. The AMD Instinct MI300X posts a single Geekbench OpenCL score of 317,994, placing it in the 100th percentile among all GPUs in the database. The NVIDIA RTX PRO 5000 72 GB Blackwell, by contrast, has a set of DirectX and Passmark results that average to 6,407, a 37th percentile showing. The raw average benchmark score gap is enormous: 317,994 versus 6,407, a difference of roughly 49.6 times. That headline disparity, however, needs qualification because the two products are measured on incompatible workloads, one compute-oriented and the other graphics-oriented.
The MI300X's single OpenCL result places it ahead of several high-end NVIDIA data center parts. Its nearest rivals in the database include the NVIDIA H200 NVL at 334,891, which beats it by 5 percent, and the NVIDIA B200 at 345,482, which is 8 percent higher. Against the NVIDIA L40S at 295,763, the MI300X leads by 7.5 percent. Against the NVIDIA RTX 6000 Ada Generation at 287,237, the MI300X leads by 10.7 percent. These deltas place the MI300X in a competitive band just below the newest NVIDIA data center accelerators and clearly above the prior generation's professional flagship.
The RTX PRO 5000's average score of 6,407 is dragged down by its DirectX and Passmark sub-scores, which are not directly comparable to the MI300X's OpenCL figure. Its nearest rivals in the database are strikingly different: the NVIDIA GeForce GTX 460 SE at 6,389 (0.3 percent behind), the NVIDIA GeForce GTX 580M at 6,389 (0.3 percent behind), the AMD Radeon Vega 10 Mobile at 6,476 (1.1 percent ahead), and the NVIDIA Quadro M5000M at 6,481 (1.1 percent ahead). These are legacy consumer and mobile parts, which indicates the RTX PRO 5000's average score is not representative of modern workstation-class performance. The individual Passmark results tell a more useful story: Passmark G3D at 24,310 and GPU Compute at 15,667, while DirectX 12 at 78 and DirectX 10 at 175 are far lower. The 3DMark Steel Nomad DX12 score of 9,579.5 is a modern graphics workload result that shows real capability, but the mixed Passmark suite, including legacy DirectX 9 at 311 and G2D at 914, pulls the average down into the range of decade-old parts.
Where Each One Wins
The MI300X wins decisively in raw compute throughput and memory capacity. It delivers 81.72 TFLOPS FP32 and the same 81.72 TFLOPS FP16, both at a 1:1 ratio. It carries 192 GB of HBM3 memory on an 8192-bit bus, producing 5.32 TB/s of bandwidth. This configuration is built for large-model inference and dense matrix workloads. The single OpenCL score of 317,994 and the 100th percentile ranking confirm it sits at the top of the database's compute hierarchy.
The RTX PRO 5000 wins in graphics features and display capability. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the MI300X lists N/A for all three APIs. The RTX PRO 5000 has four DisplayPort 2.1b outputs; the MI300X has no display outputs. It also has dedicated ray tracing cores (110) and tensor cores (440), while the MI300X lists neither field. The pixel rate of 380.3 GPixel/s and texture rate of 1,045.9 GTexel/s are meaningful for graphics rendering, whereas the MI300X's pixel rate is recorded as 0 MPixel/s. The RTX PRO 5000 is a dual-slot card with a 300 W TDP and a single 16-pin power connector, making it physically suited for workstation installation, while the MI300X is an OAM module with no power connectors and a 750 W TDP.
The data indicates a use-case split: the MI300X is a compute accelerator with no graphics pipeline, and the RTX PRO 5000 is a graphics workstation card with substantial compute headroom. For users who need FP32 or FP16 throughput at scale, the MI300X's 81.72 TFLOPS in both precisions and 192 GB memory pool dominate. For users who need rendering, display output, and API compatibility, the RTX PRO 5000 is the only one of the two that can function in that role at all.
Architecture Differences
The MI300X uses the Aqua Vanjaram chip built on CDNA 3.0, a compute-focused architecture. It is manufactured on a 5 nm process at TSMC and contains 153,000 million transistors on a 1017 mm² die, yielding a transistor density of 150.4 million per mm². The chip has 19,456 shading units and 1,216 texture mapping units, but no ROPs, no ray tracing cores, and no tensor cores listed. Its architecture is oriented toward stream processing and memory bandwidth rather than graphics rasterization.
The RTX PRO 5000 uses the GB202 chip built on Blackwell 2.0, a graphics and compute hybrid architecture. It is also manufactured on a 5 nm process at TSMC, but contains 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per mm². The chip has 14,080 shading units, 440 TMUs, 160 ROPs, 110 ray tracing cores, and 440 tensor cores. The presence of ROPs, RT cores, and tensor cores reflects a design that must handle rasterization, ray tracing, and AI acceleration simultaneously.
The transistor counts differ by roughly 60.8 billion in favor of the MI300X, and the die is 267 mm² larger. The density advantage of the MI300X, 150.4 million per mm² versus 122.9 million per mm², indicates a more tightly packed compute design. The MI300X's memory subsystem uses HBM3 with an 8192-bit bus, while the RTX PRO 5000 uses GDDR7 with a 384-bit bus. Those are different memory technologies with different bandwidth characteristics: 5.32 TB/s versus 1.34 TB/s.
Clock behavior also diverges. The MI300X has a base clock of 1000 MHz and a boost of 2100 MHz, with memory at 1300 MHz (5.2 Gbps effective). The RTX PRO 5000 has a base clock of 1740 MHz and a boost of 2377 MHz, with memory at 1750 MHz (28 Gbps effective). The RTX PRO 5000 runs at higher clocks across the board, but the MI300X compensates with far more memory channels and a wider bus.
Specification Differences
The two products differ on nearly every measurable specification. Memory size: 192 GB HBM3 on the MI300X versus 72 GB GDDR7 on the RTX PRO 5000. Memory bus width: 8192 bit versus 384 bit. Memory bandwidth: 5.32 TB/s versus 1.34 TB/s. FP32 throughput: 81.72 TFLOPS versus 66.94 TFLOPS. FP16 throughput: 81.72 TFLOPS versus 66.94 TFLOPS, both at 1:1 ratios. Pixel rate: 0 MPixel/s versus 380.3 GPixel/s. Texture rate: 2,553.6 GTexel/s versus 1,045.9 GTexel/s.
Shading units: 19,456 versus 14,080. TMUs: 1,216 versus 440. ROPs: 0 versus 160. The MI300X has no RT cores, no tensor cores, and no display outputs. The RTX PRO 5000 has 110 RT cores, 440 tensor cores, and four DisplayPort 2.1b outputs. Power: the MI300X has a 750 W TDP and suggests a 1150 W PSU; the RTX PRO 5000 has a 300 W TDP and suggests a 700 W PSU. Physical format: OAM Module with no power connectors versus Dual-slot with one 16-pin connector. Dimensions: the MI300X has no recorded length, height, or width; the RTX PRO 5000 measures 267 mm by 111 mm by 40 mm.
Release timing: the MI300X launched on 2023-12-05, while the RTX PRO 5000 launched on 2025-10-20. The MI300X lists no production status, while the RTX PRO 5000 is Active. Both use PCIe 5.0 x16. Both are manufactured by TSMC on a 5 nm process. Neither product has a launch MSRP in the database.
FAQ
Q: Which GPU has more memory bandwidth?
A: The AMD Instinct MI300X has 5.32 TB/s of bandwidth from its 192 GB HBM3 memory on an 8192-bit bus. The NVIDIA RTX PRO 5000 has 1.34 TB/s from 72 GB GDDR7 on a 384-bit bus.
Q: Does the MI300X support ray tracing?
A: No. The MI300X has no ray tracing cores listed and no graphics APIs, with DirectX, OpenGL, and Vulkan all recorded as N/A. The RTX PRO 5000 has 110 ray tracing cores and supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.
Q: How do their FP32 compute scores compare?
A: The MI300X delivers 81.72 TFLOPS FP32, while the RTX PRO 5000 delivers 66.94 TFLOPS FP32. The MI300X also delivers 81.72 TFLOPS FP16, matching its FP32 rate at a 1:1 ratio, while the RTX PRO 5000 delivers 66.94 TFLOPS FP16 at a 1:1 ratio as well.
Q: Which card has a higher clock speed?
A: The RTX PRO 5000 has a base clock of 1740 MHz and a boost clock of 2377 MHz. The MI300X has a base clock of 1000 MHz and a boost clock of 2100 MHz.
Q: What is the power draw difference?
A: The MI300X has a 750 W TDP and suggests a 1150 W power supply. The RTX PRO 5000 has a 300 W TDP and suggests a 700 W power supply. The MI300X is an OAM module with no power connectors, while the RTX PRO 5000 is a dual-slot card with one 16-pin connector.
Q: Which GPU has a higher database percentile ranking?
A: The MI300X ranks in the 100th percentile among all GPUs in the database, with an average benchmark score of 317,994. The RTX PRO 5000 ranks in the 37th percentile, with an average benchmark score of 6,407.