AMD Instinct MI300X vs NVIDIA GeForce RTX 4060 Ti 16 GB Comparison
AMD Instinct MI300X
GeForce RTX 4060 Ti 16 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA GeForce RTX 4060 Ti 16 GB
Head-to-Head Benchmarks
The recorded data for these two products cannot be compared directly, because they were measured with different benchmark suites. The AMD Instinct MI300X returns a Geekbench OpenCL score of 317994, while the NVIDIA GeForce RTX 4060 Ti 16 GB returns a 3DMark Steel Nomad DX12 score of 2907. These are separate workloads with distinct scoring scales, so the database does not list a head-to-head win for either part. What the data does show is relative positioning within each product's own competitive set.
The MI300X ranks at the 100th percentile among all GPUs in the database, which means no other recorded GPU scores higher on the Geekbench OpenCL workload. Its nearest rival, the NVIDIA H200 NVL, scores 334891, which is 5% higher; the MI300X trails that part. Against the NVIDIA B200, the MI300X is 8% behind, as the B200 scores 345482. The MI300X beats the NVIDIA L40S (295763) by 7.5% and the NVIDIA RTX 6000 Ada Generation (287237) by 10.7%. These deltas place the MI300X at the top of the stack but not at the absolute peak; two NVIDIA accelerators sit slightly ahead.
The RTX 4060 Ti 16 GB sits at the 18th percentile across all GPUs. Its nearest rivals are clustered within a fraction of a percent. The NVIDIA RTX PRO 4000 Blackwell SFF scores 2910, a 0.1% deficit; the RTX 4060 Ti 8 GB scores 2913, a 0.2% deficit; the RTX 4010 scores 2893, a 0.5% advantage; and the Quadro P600 scores 2923, a 0.5% deficit. This tight grouping shows the 16 GB variant is positioned squarely within a narrow performance band near the 2900 mark, with no rival in the immediate set more than half a percent away.
The largest gap in either dataset belongs to the MI300X versus the RTX 6000 Ada Generation at 10.7%, while the smallest is the 0.1% separation between the RTX 4060 Ti 16 GB and the RTX PRO 4000 Blackwell SFF. The benchmark results indicate that the MI300X operates in a completely different performance tier, with scores roughly two orders of magnitude higher in raw number, though the different workloads prevent any valid cross-comparison of absolute performance.
Where Each One Wins
Based on the recorded data, the MI300X wins in raw compute throughput on OpenCL, as its 317994 score places it in the 100th percentile. The RTX 4060 Ti 16 GB wins in no recorded benchmark category, because its only listed test is the 3DMark Steel Nomad DX12 run at 2907, which places it at the 18th percentile. The database shows zero wins for either product in the head-to-head field, confirming that no shared benchmark exists between them.
The use-case split follows from the workloads themselves. The MI300X is a compute-oriented accelerator with a Geekbench OpenCL result that outpaces every other GPU in the database on that test. That points to heavy parallel compute tasks. The RTX 4060 Ti 16 GB delivers a 3DMark Steel Nomad DX12 score, which targets DirectX 12 gaming and graphics workloads. The RTX 4060 Ti also supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the MI300X lists no graphics API support at all. The data shows the MI300X has no display outputs, while the RTX 4060 Ti includes 1x HDMI 2.1 and 3x DisplayPort 1.4a, so the NVIDIA part is the only one capable of driving a monitor.
In compute capacity, the MI300X has 19456 shading units versus 4352 on the RTX 4060 Ti, and its FP32 throughput is 81.72 TFLOPS versus 22.06 TFLOPS. The MI300X also has a higher texture rate at 2553.6 GTexel/s versus 344.8 GTexel/s. The RTX 4060 Ti has 48 ROPs and a pixel rate of 121.7 GPixel/s, while the MI300X has 0 ROPs and a 0 MPixel/s pixel rate. The RTX 4060 Ti includes 34 RT cores and 136 tensor cores, while the MI300X lists neither. These architectural differences align with the benchmark split: the MI300X for raw compute, the RTX 4060 Ti for graphics and ray tracing.
Architecture Differences
The two chips come from different design lineages. The MI300X uses the Aqua Vanjaram chip built on CDNA 3.0 architecture, while the RTX 4060 Ti uses the AD106 chip built on Ada Lovelace. Both are fabricated on a 5 nm process at TSMC, but the transistor counts diverge sharply. The MI300X contains 153,000 million transistors on a 1017 mm² die, giving a density of 150.4 million transistors per mm². The RTX 4060 Ti contains 22,900 million transistors on a 188 mm² die, with a density of 121.8 million per mm². The MI300X die is over five times larger in area and holds nearly seven times as many transistors.
Memory configurations are fundamentally different. The MI300X uses 192 GB of HBM3 on an 8192-bit bus, delivering 5.32 TB/s of bandwidth. The RTX 4060 Ti uses 16 GB of GDDR6 on a 128-bit bus, delivering 288.0 GB/s. The MI300X memory bus is 64 times wider, and its bandwidth is roughly 18.5 times higher. The MI300X memory clock is listed at 1300 MHz with 5.2 Gbps effective, while the RTX 4060 Ti memory clock is 2250 MHz with 18 Gbps effective. The RTX 4060 Ti uses a PCIe 4.0 x8 interface, while the MI300X uses PCIe 5.0 x16. The MI300X is an OAM module with no power connectors and no display outputs, while the RTX 4060 Ti is a dual-slot card with a single 16-pin connector and multiple display outputs.
The MI300X has a base clock of 1000 MHz and a boost clock of 2100 MHz. The RTX 4060 Ti has a base clock of 2310 MHz and a boost clock of 2535 MHz. Despite the higher clocks, the RTX 4060 Ti delivers far lower aggregate throughput because of its smaller core count. The MI300X FP32 figure is 81.72 TFLOPS, and its FP16 figure is also 81.72 TFLOPS at a 1:1 ratio. The RTX 4060 Ti FP32 is 22.06 TFLOPS, with FP16 also at 22.06 TFLOPS at 1:1. The MI300X lists no DirectX, OpenGL, or Vulkan support, while the RTX 4060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Power and physical specifications differ as well. The MI300X has a TDP of 750 W and a suggested PSU of 1150 W. The RTX 4060 Ti has a TDP of 165 W and a suggested PSU of 450 W. The RTX 4060 Ti measures 240 mm in length, 111 mm in height, and 40 mm in width. The MI300X dimensions are not recorded. The release dates are close: the MI300X launched on 2023-12-05, while the RTX 4060 Ti launched on 2023-05-17. The RTX 4060 Ti is marked as end-of-life, while the MI300X production status is not recorded. The MI300X predecessor is Radeon Instinct, and the RTX 4060 Ti predecessor is GeForce 30 with successor GeForce 50.
FAQ
Q: Which GPU has the higher benchmark score?
A: The MI300X scores 317994 on Geekbench OpenCL, while the RTX 4060 Ti 16 GB scores 2907 on 3DMark Steel Nomad DX12. These are different workloads, so the database does not treat them as directly comparable.
Q: How does the MI300X compare to its nearest rivals?
A: The MI300X is 5% behind the NVIDIA H200 NVL, 8% behind the NVIDIA B200, 7.5% ahead of the NVIDIA L40S, and 10.7% ahead of the NVIDIA RTX 6000 Ada Generation. It holds the 100th percentile rank among all GPUs.
Q: How does the RTX 4060 Ti 16 GB compare to its nearest rivals?
A: The RTX 4060 Ti 16 GB is 0.1% behind the RTX PRO 4000 Blackwell SFF, 0.2% behind the RTX 4060 Ti 8 GB, 0.5% ahead of the RTX 4010, and 0.5% behind the Quadro P600. It holds the 18th percentile rank.
Q: Which GPU has more memory and bandwidth?
A: The MI300X has 192 GB of HBM3 with 5.32 TB/s bandwidth on an 8192-bit bus. The RTX 4060 Ti has 16 GB of GDDR6 with 288.0 GB/s bandwidth on a 128-bit bus.
Q: Does either GPU support graphics APIs?
A: Only the RTX 4060 Ti supports graphics APIs, with DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The MI300X lists no DirectX, OpenGL, or Vulkan support and has no display outputs.
Q: What are the power requirements?
A: The MI300X has a TDP of 750 W and a suggested PSU of 1150 W. The RTX 4060 Ti has a TDP of 165 W and a suggested PSU of 450 W.
The Verdict
The recorded data indicates a clear division of purpose. The AMD Instinct MI300X is a compute accelerator that delivers a Geekbench OpenCL score of 317994, placing it at the 100th percentile and above the NVIDIA L40S and RTX 6000 Ada Generation, though below the H200 NVL and B200. Its 192 GB of HBM3, 8192-bit bus, 81.72 TFLOPS FP32, and 19456 shading units position it for large-scale parallel compute workloads. It has no display outputs and no graphics API support, so it is not suited for local rendering or interactive graphics.
The NVIDIA GeForce RTX 4060 Ti 16 GB is a consumer graphics card with a 3DMark Steel Nomad DX12 score of 2907, placing it at the 18th percentile and within 0.5% of its nearest rivals. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, includes 34 RT cores and 136 tensor cores, and has display outputs. Its 16 GB of GDDR6 on a 128-bit bus delivers 288.0 GB/s, and its 22.06 TFLOPS FP32 is roughly a quarter of the MI300X throughput. Its 165 W TDP and dual-slot design make it a conventional graphics card, while the MI300X is an OAM module requiring a 1150 W suggested PSU.
The choice depends on workload. For compute-dense tasks measured by OpenCL, the MI300X is the higher performer, ranking above all other GPUs in the database on that test. For DirectX 12 graphics and rendering, the RTX 4060 Ti is the functional option, as the MI300X cannot output video or execute graphics APIs. The data shows no overlap in their recorded benchmark coverage, so the correct selection follows from whether the target application is compute or graphics. The MI300X also carries a launch MSRP of none, while the RTX 4060 Ti 16 GB has a launch MSRP of 499 USD.