AMD Instinct MI300X vs NVIDIA A100 SXM4 80 GB Comparison
AMD Instinct MI300X
A100 SXM4 80 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA A100 SXM4 80 GB
AMD Instinct MI300X and NVIDIA A100 SXM4 80 GB are both OAM-module accelerators aimed at data centers, but they represent very different design philosophies and performance tiers. The data shows a clear performance hierarchy: the MI300X scores 317994 in Geekbench OpenCL, placing it in the 100th percentile of all GPUs, while the A100 SXM4 80 GB scores 183725 in Geekbench Vulkan, landing in the 98th percentile. However, because the benchmarks differ, direct numerical comparison is limited; instead, the analysis must rely on architectural specifications and each card’s positioning among its nearest rivals.
FAQ
Q: What is the raw benchmark score difference between the AMD Instinct MI300X and the NVIDIA A100 SXM4 80 GB?
A: The MI300X achieves 317994 in Geekbench OpenCL, while the A100 SXM4 80 GB achieves 183725 in Geekbench Vulkan. These are different test suites, so they are not directly comparable, but the MI300X’s score places it in the 100th percentile of all GPUs, versus the 98th percentile for the A100.
Q: How does the MI300X compare to its closest rivals in average benchmark score?
A: The MI300X’s nearest rival is the NVIDIA H200 NVL with an average score of 334891, putting the MI300X 5% behind. It is 7.5% ahead of the NVIDIA L40S (295763), 8% behind the NVIDIA B200 (345482), and 10.7% ahead of the NVIDIA RTX 6000 Ada Generation (287237).
Q: How does the A100 SXM4 80 GB stack up against its nearest competitors?
A: The A100 SXM4 80 GB’s closest rival is the NVIDIA RTX 5000 Ada Generation at 184664, a 0.5% deficit. It is 0.9% ahead of the NVIDIA RTX PRO 5000 Blackwell (182109), 1.8% behind the NVIDIA A100 SXM4 40 GB (187147), and 3.2% ahead of the NVIDIA GeForce RTX 4090 D (178050).
Q: What are the memory capacities and types for each card?
A: The MI300X features 192 GB of HBM3 memory with an 8192-bit bus and 5.32 TB/s bandwidth. The A100 SXM4 80 GB has 80 GB of HBM2e memory on a 5120-bit bus with 2.04 TB/s bandwidth.
Q: Which card uses a more advanced manufacturing process?
A: The MI300X is built on a 5 nm process at TSMC, while the A100 SXM4 80 GB uses a 7 nm process, also at TSMC. The MI300X packs 153,000 million transistors on a 1017 mm² die, versus 54,200 million transistors on an 826 mm² die for the A100.
Q: What is the power draw specification for each accelerator?
A: The MI300X has a TDP of 750 W with a suggested PSU of 1150 W, while the A100 SXM4 80 GB has a TDP of 400 W and a suggested PSU of 800 W.
Architecture Differences
The architectural gap between these two accelerators is substantial. The MI300X uses AMD’s CDNA 3.0 architecture on the Aqua Vanjaram chip, whereas the A100 SXM4 80 GB is built on NVIDIA’s Ampere architecture with the GA100 chip. The process node differs significantly: the MI300X is fabbed on a 5 nm node, while the A100 uses a 7 nm node. This allows the MI300X to integrate 153,000 million transistors, nearly three times the 54,200 million in the A100, on a larger 1017 mm² die compared to 826 mm². Transistor density reflects this: the MI300X reaches 150.4M / mm² versus 65.6M / mm² for the A100.
Compute resources diverge sharply. The MI300X has 19,456 shading units, 1,216 TMUs, and no ROPs, while the A100 has 6,912 shading units, 432 TMUs, and 160 ROPs. The A100 includes 432 tensor cores, while the MI300X lists no tensor core count. Pixel rate is telling: the MI300X produces 0 MPixel/s, whereas the A100 delivers 225.6 GPixel/s. Texture rate also favors the MI300X at 2,553.6 GTexel/s versus 609.1 GTexel/s.
FP32 compute is a major differentiator: the MI300X delivers 81.72 TFLOPS, over four times the A100’s 19.49 TFLOPS. FP16 performance is closer on paper, with the MI300X at 81.72 TFLOPS (1:1 ratio) and the A100 at 77.97 TFLOPS (4:1 ratio), but the ratios indicate different precision handling. Clock speeds differ as well: the MI300X has a 1000 MHz base and 2100 MHz boost, while the A100 runs at 1275 MHz base and 1410 MHz boost. Memory architecture is another split: the MI300X uses HBM3 with 5.32 TB/s bandwidth, while the A100 uses HBM2e with 2.04 TB/s. Bus width is 8192-bit for the MI300X versus 5120-bit for the A100.
The A100 supports PCIe 4.0 x16, while the MI300X uses PCIe 5.0 x16. Both are OAM modules with no display outputs and no power connectors listed. The MI300X has no API support specified, while the A100 also has null API entries. Production status differs: the A100 is marked end-of-life, while the MI300X has no status listed.
Head-to-Head Benchmarks
Direct head-to-head benchmarks are not available in the data, as the headToHeadBenchmarks array is empty and winsA and winsB are both 0. However, the Geekbench scores can be interpreted relative to each card’s peer group. The MI300X’s OpenCL score of 317994 places it in the 100th percentile, meaning it outperforms virtually all GPUs in that test. Its nearest rival, the NVIDIA H200 NVL, scores 334891, which is 5% higher; the B200 scores 345482, 8% higher. The MI300X leads the L40S by 7.5% and the RTX 6000 Ada by 10.7%, showing that it sits in the upper echelon of data-center accelerators.
The A100 SXM4 80 GB’s Vulkan score of 183725 places it in the 98th percentile. Its nearest rival, the RTX 5000 Ada Generation, scores 184664, a marginal 0.5% advantage. The RTX PRO 5000 Blackwell is 0.9% behind, the A100 SXM4 40 GB is 1.8% ahead, and the RTX 4090 D is 3.2% behind. This suggests the A100 SXM4 80 GB is near the top of its generation but not the absolute leader, with its 40 GB sibling slightly ahead in average score.
The biggest wins for the MI300X come from architectural advantages: FP32 throughput is 81.72 TFLOPS versus 19.49 TFLOPS, a 4.2x advantage. Memory bandwidth is 5.32 TB/s versus 2.04 TB/s, a 2.6x advantage. Shading units are 19,456 versus 6,912, a 2.8x advantage. For the A100, the wins are in pixel rate (225.6 GPixel/s vs 0 MPixel/s), ROPs (160 vs 0), and tensor cores (432 vs none listed). The A100 also has a higher base clock (1275 MHz vs 1000 MHz) and lower TDP (400 W vs 750 W), but these are not benchmark scores.
The Verdict
The data points to the MI300X as the higher-performing accelerator in raw compute and memory metrics. Its FP32 output of 81.72 TFLOPS dwarfs the A100’s 19.49 TFLOPS, and its 192 GB of HBM3 memory with 5.32 TB/s bandwidth is a generational leap over the A100’s 80 GB HBM2e at 2.04 TB/s. The MI300X’s 100th percentile ranking in Geekbench OpenCL reinforces this, as does its positioning within 5-8% of the H200 and B200, which are newer NVIDIA parts. The A100, meanwhile, sits in the 98th percentile and competes closely with the RTX 5000 Ada Generation, showing it is still capable but not at the same performance tier.
For workloads that prioritize FP32 compute, memory capacity, and bandwidth, the MI300X is the clear choice based on the specifications. The A100 SXM4 80 GB, however, offers tensor cores and ROPs that the MI300X lacks, which may matter for certain inference or graphics-adjacent tasks. The A100’s lower TDP of 400 W versus 750 W also indicates a more power-efficient design per watt, though no efficiency metrics are provided. The A100 is end-of-life, while the MI300X has no production status listed, suggesting the MI300X is the more current product. For new deployments, the MI300X’s architectural advantages make it the stronger recommendation; for legacy compatibility or scenarios requiring tensor cores, the A100 remains relevant.
Specification Differences
The two cards differ on nearly every specification field. Process node: 5 nm (MI300X) vs 7 nm (A100). Transistors: 153,000 million vs 54,200 million. Die size: 1017 mm² vs 826 mm². Transistor density: 150.4M / mm² vs 65.6M / mm². Base clock: 1000 MHz vs 1275 MHz. Boost clock: 2100 MHz vs 1410 MHz. Memory clock: 1300 MHz (5.2 Gbps effective) vs 1593 MHz (3.2 Gbps effective). Memory size: 192 GB vs 80 GB. Memory type: HBM3 vs HBM2e. Bus width: 8192 bit vs 5120 bit. Bandwidth: 5.32 TB/s vs 2.04 TB/s. Shading units: 19456 vs 6912. TMUs: 1216 vs 432. ROPs: 0 vs 160. Tensor cores: null vs 432. Pixel rate: 0 MPixel/s vs 225.6 GPixel/s. Texture rate: 2,553.6 GTexel/s vs 609.1 GTexel/s. FP32: 81.72 TFLOPS vs 19.49 TFLOPS. FP16: 81.72 TFLOPS (1:1) vs 77.97 TFLOPS (4:1). TDP: 750 W vs 400 W. Suggested PSU: 1150 W vs 800 W. Bus interface: PCIe 5.0 x16 vs PCIe 4.0 x16. Release date: 2023-12-05 vs 2020-11-15. Production status: null vs end-of-life. Predecessor: Radeon Instinct vs Tesla Turing. Successor: null vs Server Ada. The MI300X lists no API support, while the A100 also has null entries. Both are OAM modules with no display outputs or power connectors.
Where Each One Wins
The MI300X wins decisively in compute-heavy scenarios. Its FP32 throughput of 81.72 TFLOPS is ideal for scientific simulation, AI training with mixed precision (given its 1:1 FP16 ratio), and any workload that saturates memory bandwidth, where 5.32 TB/s is a massive advantage. The 192 GB memory capacity allows larger models or datasets to reside on-card without host transfer, which is critical for large-scale inference. The 100th percentile ranking and its closeness to the H200 (5% behind) and B200 (8% behind) indicate it competes with NVIDIA’s latest offerings.
The A100 SXM4 80 GB wins in scenarios requiring tensor core acceleration, as it has 432 tensor cores versus none listed for the MI300X. Its 160 ROPs and 225.6 GPixel/s pixel rate make it suitable for workloads that involve rasterization or pixel output, though its primary market is data center. The lower TDP of 400 W means it can be deployed in power-constrained environments, and its end-of-life status suggests it may be available at favorable terms for legacy systems. The A100’s 98th percentile ranking and tight competition with the RTX 5000 Ada (0.5% difference) show it still holds its own among contemporary peers, but the MI300X’s raw numbers place it in a higher performance class. For users needing maximum compute and memory, the MI300X is superior; for tensor-focused tasks or power-limited racks, the A100 retains a role.