AMD Instinct MI300X vs NVIDIA A100 SXM4 40 GB Comparison
AMD Instinct MI300X
A100 SXM4 40 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300X vs NVIDIA A100 SXM4 40 GB
# AMD Instinct MI300X vs NVIDIA A100 SXM4 40 GB
The AMD Instinct MI300X decisively outperforms the NVIDIA A100 SXM4 40 GB in the available benchmark data, delivering a 58.1% higher Geekbench OpenCL score while commanding a 100th-percentile ranking versus the A100’s 98th. This is not a close contest on raw compute; the MI300X wins the only head-to-head benchmark available, and the specification gap between the two accelerators explains why. However, the A100 SXM4 40 GB remains a relevant data-center part with its own architectural strengths, particularly in memory efficiency and established ecosystem positioning.
Head-to-Head Benchmarks
The single direct benchmark comparison — Geekbench OpenCL — shows a commanding victory for the AMD Instinct MI300X. The MI300X scores 317,994 points against the A100 SXM4 40 GB’s 201,096, a delta of 58.1%. This is not a marginal edge; it is a fundamental performance tier separation. The MI300X’s score places it in the 100th percentile of all GPUs, while the A100 sits at the 98th percentile. That two-percentile gap might sound small, but the score difference tells the real story: the MI300X is closer to the NVIDIA B200 (345,482) and H200 NVL (334,891) than it is to the A100.
Looking at the MI300X’s nearest rivals, it sits 5% below the H200 NVL and 8% below the B200, but 7.5% above the L40S and 10.7% above the RTX 6000 Ada Generation. The A100 SXM4 40 GB, by contrast, is effectively in a different league: its nearest rival is the Tesla V100S PCIe 32 GB, which scores 194,415 — 3.7% below the A100. The A100 also edges out the RTX 5000 Ada Generation by 1.3%, the A100 SXM4 80 GB by 1.9%, and the RTX PRO 5000 Blackwell by 2.8%. This clustering around the 182,000–201,000 range shows that the A100’s performance class is well below the MI300X’s.
The benchmark results indicate that the MI300X’s 58.1% lead in OpenCL is consistent with its architectural advantages: more than double the shading units, near-triple the texture units, and over triple the memory bandwidth. The A100’s only benchmark win is in Vulkan, where it scores 173,198, but the MI300X has no Vulkan result in the data — so that comparison cannot be made directly. In every measurable head-to-head metric available, the MI300X wins.
FAQ
Q: How much faster is the AMD Instinct MI300X than the NVIDIA A100 SXM4 40 GB in OpenCL?
A: The MI300X scores 317,994 versus the A100’s 201,096, a 58.1% advantage. The MI300X also holds a 100th-percentile ranking versus the A100’s 98th.
Q: What is the memory capacity difference between these two accelerators?
A: The MI300X features 192 GB of HBM3 memory on an 8192-bit bus, delivering 5.32 TB/s bandwidth. The A100 SXM4 40 GB has 40 GB of HBM2e on a 5120-bit bus, providing 1.56 TB/s. That is a 4.8x capacity advantage and a 3.4x bandwidth advantage for the MI300X.
Q: Which GPU has a higher FP32 compute throughput?
A: The MI300X delivers 81.72 TFLOPS of FP32, while the A100 SXM4 40 GB delivers 19.49 TFLOPS — a 4.2x difference in favor of AMD.
Q: How do the transistor counts and process nodes compare?
A: The MI300X uses TSMC’s 5 nm process with 153,000 million transistors on a 1017 mm² die. The A100 uses TSMC’s 7 nm process with 54,200 million transistors on an 826 mm² die. The MI300X packs 150.4M transistors per mm² versus 65.6M for the A100.
Q: Does the A100 have tensor cores that the MI300X lacks?
A: Yes. The A100 SXM4 40 GB includes 432 tensor cores, while the MI300X lists no tensor core count in the data. However, the MI300X’s FP16 throughput is 81.72 TFLOPS (1:1 ratio), while the A100’s FP16 is 77.97 TFLOPS (4:1 ratio) — the MI300X still leads in raw FP16 performance.
Q: What is the TDP difference between the two?
A: The MI300X has a 750 W TDP and a suggested PSU of 1150 W, while the A100 SXM4 40 GB has a 400 W TDP and an 800 W suggested PSU. The MI300X consumes 87.5% more power but delivers 58.1% more OpenCL performance.
Architecture Differences
The architectural gap between the MI300X and A100 SXM4 40 GB is fundamental. The MI300X is built on AMD’s CDNA 3.0 architecture, codenamed Aqua Vanjaram, fabricated on TSMC’s 5 nm process. The A100 uses NVIDIA’s Ampere architecture, chip GA100, on TSMC’s 7 nm process. The node advantage is significant: 5 nm allows the MI300X to pack 153,000 million transistors versus 54,200 million, and the die size is larger at 1017 mm² versus 826 mm². Transistor density tells the story — 150.4M per mm² for the MI300X against 65.6M for the A100.
Core counts diverge sharply. The MI300X has 19,456 shading units and 1,216 TMUs, while the A100 has 6,912 shading units and 432 TMUs. The MI300X reports 0 ROPs and 0 MPixel/s pixel rate, indicating a compute-optimized design with no rasterization pipeline. The A100, by contrast, has 160 ROPs and a 225.6 GPixel/s pixel rate. Both have no display outputs and no RT cores. The A100 has 432 tensor cores; the MI300X does not list a tensor core count.
Memory architecture is another major divergence. The MI300X uses HBM3 with 192 GB capacity, an 8192-bit bus, and 5.32 TB/s bandwidth. The A100 uses HBM2e with 40 GB, a 5120-bit bus, and 1.56 TB/s. Clock speeds differ: the MI300X runs at 1000 MHz base and 2100 MHz boost, while the A100 runs at 1095 MHz base and 1410 MHz boost. The MI300X’s higher boost clock, combined with more cores, drives its FP32 advantage of 81.72 TFLOPS versus 19.49 TFLOPS. FP16 performance is closer: 81.72 TFLOPS (1:1) for the MI300X versus 77.97 TFLOPS (4:1) for the A100, but the MI300X still leads.
The MI300X uses PCIe 5.0 x16, while the A100 uses PCIe 4.0 x16. Both are module form factors — OAM for the MI300X, SXM for the A100 — with no power connectors listed. The MI300X has no API support (DirectX, OpenGL, Vulkan all N/A), while the A100’s API fields are null. The production status differs: the A100 is marked end-of-life, while the MI300X’s status is not specified.
The Verdict
The data is unambiguous: the AMD Instinct MI300X is the superior performer for compute workloads measured by Geekbench OpenCL. Its 58.1% lead over the A100 SXM4 40 GB, combined with a 100th-percentile ranking, makes it the clear choice for applications that prioritize raw throughput, large memory capacity, and high bandwidth. The MI300X’s 192 GB of HBM3 with 5.32 TB/s bandwidth dwarfs the A100’s 40 GB HBM2e at 1.56 TB/s — a decisive advantage for large model inference or training datasets that exceed the A100’s memory pool.
The A100 SXM4 40 GB, however, is not without merit. Its 98th-percentile ranking shows it remains competitive in its class, edging out the RTX 5000 Ada Generation, A100 SXM4 80 GB, and RTX PRO 5000 Blackwell by 1.3–2.8%. It also has the advantage of tensor cores (432) and a lower TDP (400 W versus 750 W), making it more power-efficient per watt in raw thermal terms. The A100’s 225.6 GPixel/s pixel rate and 160 ROPs also give it capabilities the MI300X lacks entirely.
For users prioritizing absolute performance and memory capacity, the MI300X is the data-backed winner. For those needing tensor core acceleration, lower power draw, or a production card with an established end-of-life roadmap, the A100 SXM4 40 GB remains viable. The benchmark delta is too large to recommend the A100 for pure compute leadership, but its efficiency and tensor core support carve out a specific niche.
Specification Differences
| Specification | AMD Instinct MI300X | NVIDIA A100 SXM4 40 GB |
|---|---|---|
| Architecture | CDNA 3.0 | Ampere |
| Process Node | 5 nm | 7 nm |
| Transistors | 153,000 million | 54,200 million |
| Die Size | 1017 mm² | 826 mm² |
| Base Clock | 1000 MHz | 1095 MHz |
| Boost Clock | 2100 MHz | 1410 MHz |
| Memory Size | 192 GB | 40 GB |
| Memory Type | HBM3 | HBM2e |
| Memory Bus | 8192 bit | 5120 bit |
| Memory Bandwidth | 5.32 TB/s | 1.56 TB/s |
| Shading Units | 19456 | 6912 |
| TMUs | 1216 | 432 |
| ROPs | 0 | 160 |
| Tensor Cores | N/A | 432 |
| FP32 | 81.72 TFLOPS | 19.49 TFLOPS |
| FP16 | 81.72 TFLOPS (1:1) | 77.97 TFLOPS (4:1) |
| TDP | 750 W | 400 W |
| Suggested PSU | 1150 W | 800 W |
| Bus Interface | PCIe 5.0 x16 | PCIe 4.0 x16 |
| Slot Width | OAM Module | SXM Module |
| Release Date | 2023-12-05 | 2020-05-13 |
| Production Status | Not specified | End-of-life |
Where Each One Wins
The AMD Instinct MI300X wins decisively in compute-heavy workloads. Its 81.72 TFLOPS FP32 performance is 4.2x the A100’s 19.49 TFLOPS, and its 58.1% OpenCL score lead confirms this advantage in practical terms. The MI300X also wins on memory capacity (192 GB versus 40 GB) and bandwidth (5.32 TB/s versus 1.56 TB/s), making it the superior choice for large-scale AI training, inference with massive model footprints, and any workload where data must stay resident on the accelerator. Its PCIe 5.0 interface doubles the A100’s PCIe 4.0 bandwidth, reducing host-device transfer bottlenecks. The MI300X’s 2100 MHz boost clock versus 1410 MHz gives it a raw frequency advantage that compounds with its core count advantage.
The NVIDIA A100 SXM4 40 GB wins on power efficiency, with a 400 W TDP versus 750 W — a 350 W difference that translates to lower operational heat and power infrastructure demands. Its suggested PSU of 800 W versus 1150 W further reduces system power requirements. The A100 also wins on tensor core availability, listing 432 tensor cores while the MI300X has none in the data. For workloads that specifically leverage tensor cores — such as certain deep learning operations — the A100 offers a specialized path. The A100 also retains rasterization capabilities with 160 ROPs and 225.6 GPixel/s pixel rate, though the MI300X’s 0 ROPs suggests this is irrelevant for compute-focused deployment. The A100’s end-of-life status may be a consideration for long-term procurement, but it also indicates a mature, battle-tested platform with established software support. The A100’s clustering near the Tesla V100S PCIe 32 GB, RTX 5000 Ada Generation, and RTX PRO 5000 Blackwell shows it remains competitive within its performance tier, even if that tier is far below the MI300X.