NVIDIA RTX PRO 6000D Blackwell Max-Q vs NVIDIA Tesla K20c Comparison

NVIDIA
GEFORCE

NVIDIA RTX PRO 6000D Blackwell Max-Q

CORE STATE GB202
VRAM 96 GB
CLOCK SPEED 2288 MHz
TDP 300 W
BUS WIDTH 512 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

Tesla K20c

CORE STATE GK110
VRAM 5 GB
CLOCK SPEED —
TDP 225 W
BUS WIDTH 320 bit
ARCHITECTURE Kepler
nm
PROCESS 28 nm
LAUNCH DATE 2012

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
11,088
N/A
geekbench_opencl
N/A
11,479

Analysis: NVIDIA RTX PRO 6000D Blackwell Max-Q vs NVIDIA Tesla K20c

The Verdict

The data presents a stark generational contrast. The NVIDIA Tesla K20c, a Kepler-era compute card from 2012, and the NVIDIA RTX PRO 6000D Blackwell Max-Q, a 2025 workstation flagship, share a dual-slot profile but little else. The RTX PRO 6000D is the decisive choice for any modern workload, offering a 31.3x advantage in FP32 throughput and a 17.2x advantage in memory capacity. The Tesla K20c, however, holds a niche as a legacy compute device, with benchmark results placing it within 1.9% of the GeForce GTX 780M, indicating it remains a functional, if dated, OpenCL performer.

Strictly from the data, the RTX PRO 6000D Blackwell Max-Q is the only rational pick for new deployments. Its 110.1 TFLOPS FP32 performance dwarfs the Tesla's 3.524 TFLOPS, and its 96 GB of GDDR7 memory with 1.79 TB/s bandwidth is in a different performance universe than the Tesla's 5 GB GDDR5 with 208.0 GB/s. The Blackwell card's active production status, modern API support (DirectX 12 Ultimate, Vulkan 1.4), and display outputs (4x DisplayPort 2.1b) make it a versatile, current-generation solution. The Tesla K20c, with its "No outputs" and end-of-life status, is relegated to historical or specialized compute contexts where its Kepler architecture and 3,199 USD launch MSRP might still be relevant for legacy software validation.

Architecture Differences

The architectural gap between these two NVIDIA GPUs spans over a decade of design philosophy. The Tesla K20c is built on the GK110 chip using a 28 nm process at TSMC, packing 7,080 million transistors on a 561 mm² die, resulting in a transistor density of 12.6M per mm². In contrast, the RTX PRO 6000D uses the GB202 chip on a 5 nm process, also at TSMC, with 92,200 million transistors on a larger 750 mm² die, achieving a dramatically higher density of 122.9M per mm². This density increase is the foundation for the Blackwell card's massive compute advantage.

Core configurations tell a similar story of escalation. The Tesla K20c features 2,496 shading units, 208 TMUs, and 40 ROPs, with no dedicated RT or Tensor cores. The RTX PRO 6000D, however, deploys 24,064 shading units, 752 TMUs, and 192 ROPs, augmented by 188 RT cores and 752 Tensor cores. This represents a 9.6x increase in shading units and a 4.8x increase in ROPs, enabling the Blackwell card's 439.3 GPixel/s pixel rate versus the Kepler card's 36.71 GPixel/s. The texture rate jumps from 146.8 GTexel/s to 1,720.6 GTexel/s, a difference of over 11.7x.

Memory architecture also diverges sharply. The K20c uses 5 GB of GDDR5 on a 320-bit bus, delivering 208.0 GB/s. The RTX PRO 6000D uses 96 GB of GDDR7 on a 512-bit bus, delivering 1.79 TB/s. Clock speeds reflect the process node advantage: the K20c's memory runs at 1300 MHz (5.2 Gbps effective), while the Blackwell card's base clock is 1590 MHz, boosting to 2288 MHz, with memory at 1750 MHz (28 Gbps effective). The TDP difference is moderate—225 W for the Tesla versus 300 W for the RTX PRO—but the power connector changes from a 1x 6-pin + 1x 8-pin setup to a single 16-pin connector. The bus interface also advances from PCIe 2.0 x16 to PCIe 5.0 x16.

FAQ

Q: Which GPU has higher raw compute performance?

A: The RTX PRO 6000D Blackwell Max-Q is overwhelmingly faster. Its FP32 performance is 110.1 TFLOPS, which is 31.3 times the Tesla K20c's 3.524 TFLOPS. The Blackwell card also offers FP16 at 110.1 TFLOPS (1:1), while the Tesla has no listed FP16 capability.

Q: How do the memory capacities compare?

A: The RTX PRO 6000D has 96 GB of GDDR7 memory, which is 19.2 times larger than the Tesla K20c's 5 GB of GDDR5. Memory bandwidth is also vastly different: 1.79 TB/s for the Blackwell card versus 208.0 GB/s for the Kepler card, an 8.6x advantage.

Q: Are these cards suitable for modern gaming or workstation use?

A: The RTX PRO 6000D is designed for current workloads, supporting DirectX 12 Ultimate (12_2), Vulkan 1.4, and featuring 188 RT cores and 752 Tensor cores. It also has 4x DisplayPort 2.1b outputs. The Tesla K20c supports DirectX 12 (11_0) and Vulkan 1.2.175, has no RT or Tensor cores, and offers no display outputs, making it unsuitable for any visual or modern compute task.

Q: What is the production status of each card?

A: The Tesla K20c is marked as "End-of-life" and was released on 2012-11-11, with its predecessor being Tesla Fermi and successor Tesla Maxwell. The RTX PRO 6000D is "Active" with a release date of 2025-03-17 and a predecessor of Workstation Ada.

Q: How do their physical dimensions compare?

A: Both cards are dual-slot and share the same length of 267 mm (10.5 inches). The RTX PRO 6000D has specified height and width of 111 mm (4.4 inches) and 40 mm (1.6 inches), respectively. The Tesla K20c has no listed height or width.

Q: What is the performance percentile ranking for each?

A: The Tesla K20c ranks at the 51st percentile among all GPUs, with an average benchmark score of 11,479. The RTX PRO 6000D ranks at the 50th percentile, with an average score of 11,088. These rankings are based on different benchmark suites (Geekbench OpenCL for the Tesla, 3DMark Steel Nomad DX12 for the Blackwell).

Specification Differences

The following table highlights the fields where the two GPUs differ, based solely on the provided data:

| Specification | NVIDIA Tesla K20c | NVIDIA RTX PRO 6000D Blackwell Max-Q |

|:--- |:--- |:--- |

| Chip | GK110 | GB202 |

| Architecture | Kepler | Blackwell 2.0 |

| Generation | Tesla Kepler (Kxx) | Blackwell PRO W (x000) |

| Process Node | 28 nm | 5 nm |

| Transistors | 7,080 million | 92,200 million |

| Die Size | 561 mm² | 750 mm² |

| Transistor Density | 12.6M / mm² | 122.9M / mm² |

| Base Clock | null | 1590 MHz |

| Boost Clock | null | 2288 MHz |

| Memory Clock | 1300 MHz (5.2 Gbps) | 1750 MHz (28 Gbps) |

| Memory Size | 5 GB | 96 GB |

| Memory Type | GDDR5 | GDDR7 |

| Memory Bus Width | 320 bit | 512 bit |

| Memory Bandwidth | 208.0 GB/s | 1.79 TB/s |

| Shading Units | 2496 | 24064 |

| TMUs | 208 | 752 |

| ROPs | 40 | 192 |

| RT Cores | null | 188 |

| Tensor Cores | null | 752 |

| Pixel Rate | 36.71 GPixel/s | 439.3 GPixel/s |

| Texture Rate | 146.8 GTexel/s | 1,720.6 GTexel/s |

| FP32 Performance | 3.524 TFLOPS | 110.1 TFLOPS |

| FP16 Performance | null | 110.1 TFLOPS (1:1) |

| TDP | 225 W | 300 W |

| Power Connectors | 1x 6-pin + 1x 8-pin | 1x 16-pin |

| Suggested PSU | 550 W | 700 W |

| Bus Interface | PCIe 2.0 x16 | PCIe 5.0 x16 |

| Display Outputs | No outputs | 4x DisplayPort 2.1b |

| DirectX Support | 12 (11_0) | 12 Ultimate (12_2) |

| Vulkan Support | 1.2.175 | 1.4 |

| Height | null | 111 mm (4.4 inches) |

| Width | null | 40 mm (1.6 inches) |

| Production Status | End-of-life | Active |

| Release Date | 2012-11-11 | 2025-03-17 |

| Predecessor | Tesla Fermi | Workstation Ada |

| Successor | Tesla Maxwell | null |

| Launch MSRP | 3,199 USD | 8,565 USD |

| Benchmark Test | Geekbench OpenCL (11,479) | 3DMark Steel Nomad DX12 (11,088) |

Head-to-Head Benchmarks

The provided data does not include any direct head-to-head benchmark entries between the Tesla K20c and the RTX PRO 6000D. However, the individual benchmark results and nearest rival comparisons offer insight. The Tesla K20c achieves a Geekbench OpenCL score of 11,479. Its nearest rival, the AMD Radeon Pro 5500M, scores 11,528, which is 0.4% higher. The K20c also trails the AMD Radeon RX 7800 XT (11,627) by 1.3% and the NVIDIA GeForce GTX 1660 (11,680) by 1.7%, while beating the NVIDIA GeForce GTX 780M (11,261) by 1.9%. This places the Tesla in a performance class roughly equivalent to mid-range GPUs from several generations later, which confirms its original compute-oriented design.

For the RTX PRO 6000D, the benchmark result is a 3DMark Steel Nomad DX12 score of 11,088. Its nearest rival is the NVIDIA RTX PRO 6000 Blackwell Max-Q with an identical score and 0% delta, indicating these two cards perform at parity in this specific test. The data also shows the RTX PRO 6000D is 0.1% ahead of the AMD Radeon RX 550 (11,075) and 0.4% ahead of the NVIDIA GeForce GTX 1650 SUPER (11,047), but 1.2% behind the AMD FirePro W4300 (11,225). This suggests that in the specific 3DMark Steel Nomad workload, the Blackwell card's raw compute power is not fully leveraged, as it scores within a narrow band of much older and less powerful GPUs.

The biggest wins are not in these specific benchmark scores but in the architectural and specification gaps. The RTX PRO 6000D's 110.1 TFLOPS FP32 is a 31.3x increase over the Tesla's 3.524 TFLOPS. Its 1.79 TB/s memory bandwidth is 8.6x higher, and its 96 GB memory capacity is 19.2x larger. These are the decisive factors, as the benchmark scores alone do not capture the massive differences in compute, memory, and feature set that would dominate any real-world comparison.

Where Each One Wins

Based on the data, the RTX PRO 6000D Blackwell Max-Q wins in every modern performance category. It dominates in raw compute (110.1 TFLOPS FP32), memory bandwidth (1.79 TB/s), and pixel/texture rates (439.3 GPixel/s and 1,720.6 GTexel/s). Its 96 GB of GDDR7 memory is essential for large datasets, AI model training, and high-resolution rendering, which is supported by its 188 RT cores and 752 Tensor cores. The card's active production status, PCIe 5.0 interface, and modern display outputs (4x DisplayPort 2.1b) make it a forward-looking choice for any current workstation. It also supports the latest APIs, including DirectX 12 Ultimate and Vulkan 1.4, ensuring compatibility with next-generation software.

The Tesla K20c's only advantage lies in its legacy status and specific benchmark context. Its Geekbench OpenCL score of 11,479 is marginally higher than the RTX PRO 6000D's 3DMark Steel Nomad score of 11,088, but these are different tests and not directly comparable. The K20c's nearest rival data shows it is competitive with GPUs like the GeForce GTX 1660 and Radeon Pro 5500M in OpenCL workloads, which could be relevant for maintaining legacy compute environments or validating older code that relies on Kepler-specific behavior. Its lower TDP of 225 W and suggested 550 W PSU also mean it requires less power infrastructure than the 300 W Blackwell card with a 700 W PSU suggestion. However, with no display outputs, no RT/Tensor cores, and end-of-life status, the Tesla K20c is strictly a niche product for retro-computing or specific legacy compute tasks, while the RTX PRO 6000D is the clear winner for any current or future deployment.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX PRO 6000D Blackwell Max-Q
Tesla K20c
Core Specs
Shading Units
24,064
2,496 -89.6%
Shaders
24,064
2,496 -89.6%
TMUs
752
208 -72.3%
ROPs
192
40 -79.2%
SM Count
188
—
Clocks
Base Clock
1590 MHz
—
Boost Clock
2288 MHz
—
GPU Clock
—
706 MHz
Memory Clock
1750 MHz 28 Gbps effective
1300 MHz 5.2 Gbps effective
Memory
Memory Size
96 GB
5 GB
VRAM (MB)
98,304
5,120 -94.8%
Memory Type
GDDR7
GDDR5
Memory Bus
512 bit
320 bit
Bandwidth
1.79 TB/s
208.0 GB/s
Cache
L1 Cache
128 KB (per SM)
16 KB (per SMX)
L2 Cache
128 MB
1280 KB
Performance
Pixel Rate
439.3 GPixel/s
36.71 GPixel/s
Texture Rate
1,720.6 GTexel/s
146.8 GTexel/s
FP32 (TFLOPS)
110.1 TFLOPS
3.524 TFLOPS
FP64 (TFLOPS)
1.721 TFLOPS (1:64)
1,174.8 GFLOPS (1:3)
FP16 (TFLOPS)
110.1 TFLOPS (1:1)
—
AI/RT
RT Cores
188
—
Tensor Cores
752
—
Power
TDP
300 W
225 W
TDP (W)
300
225 -25.0%
Suggested PSU
700 W
550 W
Power Connectors
1x 16-pin
1x 6-pin + 1x 8-pin
Architecture
Architecture
Blackwell 2.0
Kepler
GPU Name
GB202
GK110
Generation
Blackwell PRO W (x000)
Tesla Kepler (Kxx)
Process Size
5 nm
28 nm
Transistors
92,200 million
7,080 million
Die Size
750 mm²
561 mm²
Foundry
TSMC
TSMC
Density
122.9M / mm²
12.6M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (11_0)
OpenGL
4.6
4.6
Vulkan
1.4
1.2.175
OpenCL
3.0
3.0
CUDA
12.0
3.5
Shader Model
6.9
6.5 (5.1)
Physical
Slot Width
Dual-slot
Dual-slot
Length
267 mm 10.5 inches
267 mm 10.5 inches
Height
111 mm 4.4 inches
—
Outputs
4x DisplayPort 2.1b
No outputs
Bus Interface
PCIe 5.0 x16
PCIe 2.0 x16
Other
Launch Price
8,565 USD
3,199 USD
Production
Active
End-of-life
Predecessor
Workstation Ada
Tesla Fermi
Successor
—
Tesla Maxwell
View RTX PRO 6000D Blackwell Max-Q Details View Tesla K20c Details