NVIDIA Quadro P1000 vs NVIDIA RTX PRO 4000 Blackwell SFF Comparison

NVIDIA
GEFORCE

NVIDIA Quadro P1000

CORE STATE GP107
VRAM 4 GB
CLOCK SPEED 1480 MHz
TDP 47 W
BUS WIDTH 128 bit
ARCHITECTURE Pascal
nm
PROCESS 14 nm
LAUNCH DATE 2017
VS
NVIDIA
GEFORCE

RTX PRO 4000 Blackwell SFF

CORE STATE GB203
VRAM 24 GB
CLOCK SPEED 1342 MHz
TDP 70 W
BUS WIDTH 192 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
13,584
N/A
geekbench_vulkan
7,739
N/A
passmark_directx_10
21
N/A
passmark_directx_11
31
N/A
passmark_directx_12
19
N/A
passmark_directx_9
79
N/A
passmark_g2d
589
N/A
passmark_g3d
4,512
N/A
passmark_gpu_compute
1,891
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
2,910

Analysis: NVIDIA Quadro P1000 vs NVIDIA RTX PRO 4000 Blackwell SFF

The NVIDIA Quadro P1000 and the NVIDIA RTX PRO 4000 Blackwell SFF represent two distinct eras of professional graphics, separated by nearly a decade of architectural evolution. The data shows a clear generational divide: the P1000 is a compact, low-power Pascal-era board, while the RTX PRO 4000 is a modern Blackwell SFF card with vastly higher raw compute and memory resources. However, their benchmark scores and percentile rankings tell a more nuanced story than a simple "newer is better" verdict, as the P1000 holds its own in legacy API tests while the RTX PRO 4000 dominates in modern workloads.

Where Each One Wins

The benchmark data reveals a sharp split based on workload type and API generation. The Quadro P1000 wins decisively in legacy DirectX tests. It scores 79 in Passmark DirectX 9, which is its highest single benchmark result, and it also leads in Passmark DirectX 10 (21 vs. the RTX PRO 4000's lack of a recorded score) and Passmark DirectX 11 (31 vs. no score). In Passmark DirectX 12, the P1000 scores 19, but the RTX PRO 4000 has no comparable DirectX 12 result in the data, making the comparison incomplete. The P1000 also wins in Passmark G2D (589) and Passmark G3D (4512), which indicate 2D desktop and general 3D rendering performance, respectively.

The RTX PRO 4000 Blackwell SFF, by contrast, wins in the only modern benchmark recorded: 3DMark Steel Nomad DX12, where it scores 2910. This is a compute-heavy, modern API test that the P1000 simply does not have a result for. The RTX PRO 4000 also has a higher average benchmark score (2910 vs. 3163 is actually lower, but that is due to the P1000 having more benchmark entries; the raw scores are what matter). In terms of compute, the RTX PRO 4000's Passmark GPU Compute score is not listed, but its 24.05 TFLOPS FP32 performance dwarfs the P1000's 1.894 TFLOPS. The practical interpretation: the P1000 is for legacy CAD and older OpenGL/DirectX applications, while the RTX PRO 4000 is for modern DX12 and compute-heavy workloads.

Architecture Differences

The two cards are built on fundamentally different architectures. The Quadro P1000 uses the GP107 chip, based on the Pascal architecture, manufactured on a 14 nm process at Samsung. It packs 3,300 million transistors on a 132 mm² die, giving a transistor density of 25.0M per mm². The RTX PRO 4000 Blackwell SFF uses the GB203 chip, based on Blackwell 2.0, built on a 5 nm process at TSMC. This part has 45,600 million transistors on a 378 mm² die, achieving a density of 120.6M per mm². That is a dramatic leap: over 13 times more transistors and nearly five times the density per square millimeter.

The memory subsystems are equally divergent. The P1000 has 4 GB of GDDR5 on a 128-bit bus, yielding 80.19 GB/s of bandwidth. The RTX PRO 4000 has 24 GB of GDDR7 on a 192-bit bus, yielding 432.0 GB/s of bandwidth. The shader configuration reflects this gap: the P1000 has 640 shading units, 40 TMUs, and 32 ROPs, while the RTX PRO 4000 has 8,960 shading units, 280 TMUs, and 96 ROPs. The RTX PRO 4000 also adds hardware that the P1000 lacks entirely: 70 RT cores and 280 tensor cores. The P1000 has no RT or tensor core support, meaning it cannot accelerate ray tracing or AI inference in hardware. The bus interface differs too: the P1000 uses PCIe 3.0 x16, while the RTX PRO 4000 uses PCIe 5.0 x8, offering four times the per-lane bandwidth.

Head-to-Head Benchmarks

There are no direct head-to-head benchmark entries in the data, but the individual scores allow for meaningful comparisons. The most striking difference is in FP32 compute. The RTX PRO 4000 delivers 24.05 TFLOPS, which is roughly 12.7 times the P1000's 1.894 TFLOPS. This is not a close race; it is a generational stomping. Similarly, texture rate favors the RTX PRO 4000 at 375.8 GTexel/s versus the P1000's 59.20 GTexel/s, a 6.3x advantage. Pixel rate is 128.8 GPixel/s vs. 47.36 GPixel/s, a 2.7x lead for the newer card.

In legacy API benchmarks, the P1000 actually wins outright. For Passmark DirectX 9, the P1000 scores 79; the RTX PRO 4000 has no recorded score. The same is true for Passmark DirectX 10 (21 vs. none) and DirectX 11 (31 vs. none). The P1000 also posts a Passmark G3D score of 4512, while the RTX PRO 4000 has no G3D result. In OpenCL, the P1000 scores 13584 on Geekbench, but the RTX PRO 4000 has no OpenCL result. The RTX PRO 4000's only benchmark is 3DMark Steel Nomad DX12 at 2910, which is a modern API test. The P1000 has no equivalent score.

Looking at average benchmark scores, the P1000 averages 3163 across its nine tests, while the RTX PRO 4000 averages 2910 from a single test. This is misleading, however, because the P1000's average is inflated by legacy tests where it performs relatively well. The percentile rankings reinforce this: the P1000 sits at the 20th percentile of all GPUs, while the RTX PRO 4000 sits at the 19th percentile. For context, the P1000's nearest rivals include the Intel Arc Pro B60 (avg 3182, delta -0.6%) and the NVIDIA GeForce GT 640 (avg 3210, delta -1.5%). The RTX PRO 4000's nearest rivals include the NVIDIA GeForce RTX 4060 Ti 16 GB (avg 2907, delta 0.1%) and the RTX 4060 Ti 8 GB (avg 2913, delta -0.1%). These deltas are tiny, indicating that both cards are competitive with their immediate peers.

FAQ

Q: Which card has more memory and bandwidth?

A: The RTX PRO 4000 Blackwell SFF has 24 GB of GDDR7 memory on a 192-bit bus, delivering 432.0 GB/s of bandwidth. The Quadro P1000 has 4 GB of GDDR5 on a 128-bit bus, delivering 80.19 GB/s.

Q: Can the Quadro P1000 handle ray tracing or AI workloads?

A: No. The P1000 has no RT cores or tensor cores, so it cannot accelerate ray tracing or tensor-based AI inference. The RTX PRO 4000 includes 70 RT cores and 280 tensor cores for those tasks.

Q: Why does the P1000 score higher in Passmark DirectX 9?

A: The P1000 scores 79 in Passmark DirectX 9, which is its best result. The RTX PRO 4000 has no recorded Passmark DirectX 9 score, so the P1000 wins by default in that legacy API test. This likely reflects driver optimization and architectural efficiency for older APIs.

Q: What is the power draw difference?

A: The P1000 has a TDP of 47 W and requires a 200 W suggested PSU. The RTX PRO 4000 has a TDP of 70 W and a 250 W suggested PSU. Neither card requires external power connectors.

Q: Which card has a higher FP32 compute throughput?

A: The RTX PRO 4000 has 24.05 TFLOPS FP32, which is approximately 12.7 times higher than the P1000's 1.894 TFLOPS.

Q: Are these cards the same physical size?

A: No. The P1000 is a single-slot card measuring 150 mm in length and 69 mm in height. The RTX PRO 4000 is a dual-slot card measuring 167 mm in length, 69 mm in height, and 40 mm in width.

The Verdict

The data points to a clear choice based on workload era, not raw performance alone. If your software relies on DirectX 9, 10, or 11, or if you need a low-profile, single-slot card with minimal power draw, the Quadro P1000 is the only option that has benchmark scores for those APIs. It also has a higher Passmark G3D score (4512) than the RTX PRO 4000's lack of a G3D result, suggesting it may be more suitable for lightweight 3D visualization tasks that use those legacy paths. The P1000 is end-of-life, but it still holds the 20th percentile ranking, which is competitive with its nearest rivals like the Intel Arc Pro B60 (delta -0.6%).

If your work involves modern DirectX 12 Ultimate, ray tracing, tensor-based AI, or large datasets that require more than 4 GB of VRAM, the RTX PRO 4000 Blackwell SFF is the definitive choice. Its 24 GB of GDDR7 memory and 432.0 GB/s bandwidth are essential for modern professional workloads. Its 3DMark Steel Nomad DX12 score of 2910 is the only modern benchmark in the data, and it lands at the 19th percentile, just 0.1% behind the NVIDIA GeForce RTX 4060 Ti 16 GB. The RTX PRO 4000 also supports PCIe 5.0 x8, which the P1000 cannot offer with its PCIe 3.0 x16 interface. For any forward-looking build, the RTX PRO 4000 is the practical pick, despite its higher 70 W TDP and dual-slot footprint.

Specification Differences

| Specification | NVIDIA Quadro P1000 | NVIDIA RTX PRO 4000 Blackwell SFF |

|----------------|---------------------|------------------------------------|

| Architecture | Pascal | Blackwell 2.0 |

| Process Node | 14 nm (Samsung) | 5 nm (TSMC) |

| Transistors | 3,300 million | 45,600 million |

| Die Size | 132 mm² | 378 mm² |

| Base Clock | 1266 MHz | 405 MHz |

| Boost Clock | 1480 MHz | 1342 MHz |

| Memory Size | 4 GB | 24 GB |

| Memory Type | GDDR5 | GDDR7 |

| Memory Bus | 128 bit | 192 bit |

| Memory Bandwidth | 80.19 GB/s | 432.0 GB/s |

| Shading Units | 640 | 8,960 |

| TMUs | 40 | 280 |

| ROPs | 32 | 96 |

| RT Cores | None | 70 |

| Tensor Cores | None | 280 |

| Pixel Rate | 47.36 GPixel/s | 128.8 GPixel/s |

| Texture Rate | 59.20 GTexel/s | 375.8 GTexel/s |

| FP32 Compute | 1.894 TFLOPS | 24.05 TFLOPS |

| FP16 Compute | 29.60 GFLOPS (1:64) | 24.05 TFLOPS (1:1) |

| TDP | 47 W | 70 W |

| Slot Width | Single-slot | Dual-slot |

| Bus Interface | PCIe 3.0 x16 | PCIe 5.0 x8 |

| Display Outputs | 4x mini-DisplayPort 1.4a | 4x mini-DisplayPort 2.1b |

| DirectX Support | 12 (12_1) | 12 Ultimate (12_2) |

| Length | 150 mm | 167 mm |

| Height | 69 mm | 69 mm |

| Width | Not specified | 40 mm |

| Production Status | End-of-life | Active |

| Release Date | 2017-02-06 | 2025-08-10 |

DETAILED SPECIFICATIONS

SPECIFICATION
Quadro P1000
RTX PRO 4000 Blackwell SFF
Core Specs
Shading Units
640
8,960 +1300.0%
Shaders
640
8,960 +1300.0%
TMUs
40
280 +600.0%
ROPs
32
96 +200.0%
SM Count
5
70 +1300.0%
Clocks
Base Clock
1266 MHz
405 MHz
Boost Clock
1480 MHz
1342 MHz
Memory Clock
1253 MHz 5 Gbps effective
1125 MHz 18 Gbps effective
Memory
Memory Size
4 GB
24 GB
VRAM (MB)
4,096
24,576 +500.0%
Memory Type
GDDR5
GDDR7
Memory Bus
128 bit
192 bit
Bandwidth
80.19 GB/s
432.0 GB/s
Cache
L1 Cache
48 KB (per SM)
128 KB (per SM)
L2 Cache
1024 KB
48 MB
Performance
Pixel Rate
47.36 GPixel/s
128.8 GPixel/s
Texture Rate
59.20 GTexel/s
375.8 GTexel/s
FP32 (TFLOPS)
1.894 TFLOPS
24.05 TFLOPS
FP64 (TFLOPS)
59.20 GFLOPS (1:32)
375.8 GFLOPS (1:64)
FP16 (TFLOPS)
29.60 GFLOPS (1:64)
24.05 TFLOPS (1:1)
AI/RT
RT Cores
—
70
Tensor Cores
—
280
Power
TDP
47 W
70 W
TDP (W)
47
70 +48.9%
Suggested PSU
200 W
250 W
Power Connectors
None
None
Architecture
Architecture
Pascal
Blackwell 2.0
GPU Name
GP107
GB203
Generation
Quadro Pascal (Px000)
Blackwell PRO W (x000)
Process Size
14 nm
5 nm
Transistors
3,300 million
45,600 million
Die Size
132 mm²
378 mm²
Foundry
Samsung
TSMC
Density
25.0M / mm²
120.6M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
6.1
12.0
Shader Model
6.8
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
150 mm 5.9 inches
167 mm 6.6 inches
Height
69 mm 2.7 inches
69 mm 2.7 inches
Outputs
4x mini-DisplayPort 1.4a
4x mini-DisplayPort 2.1b
Bus Interface
PCIe 3.0 x16
PCIe 5.0 x8
Other
Production
End-of-life
Active
Predecessor
Quadro Maxwell
Workstation Ada
Successor
Quadro Volta
—
View Quadro P1000 Details View RTX PRO 4000 Blackwell SFF Details