NVIDIA Quadro M5000M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA Quadro M5000M

CORE STATE GM204
VRAM 8 GB
CLOCK SPEED 1051 MHz
TDP 100 W
BUS WIDTH 256 bit
ARCHITECTURE Maxwell 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2015
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
22,920
N/A
geekbench_vulkan
24,875
N/A
passmark_directx_10
35
175
passmark_directx_11
54
219
passmark_directx_12
29
78
passmark_directx_9
119
311
passmark_g2d
476
914
passmark_g3d
7,062
24,310
passmark_gpu_compute
2,756
15,667
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5

Analysis: NVIDIA Quadro M5000M vs NVIDIA RTX PRO 5000 72 GB Blackwell

The NVIDIA Quadro M5000M and the NVIDIA RTX PRO 5000 72 GB Blackwell represent two distant points in NVIDIA’s professional mobile and workstation GPU lineage. The data shows a stark generational divide, with the newer Blackwell part dominating across every shared benchmark metric. This analysis examines the raw numbers, architectural shifts, and the implications for a prospective user, relying solely on the provided specifications and benchmark results.

Head-to-Head Benchmarks

The benchmark results paint a picture of overwhelming superiority for the NVIDIA RTX PRO 5000 72 GB Blackwell. Across the seven shared tests, the Blackwell GPU wins decisively in every single one, with performance deltas ranging from roughly 48% to over 82%. The most lopsided victory is in the `passmark_gpu_compute` test, where the RTX PRO 5000 scores 15,667 compared to the M5000M’s 2,756. This represents an 82.4% advantage, highlighting a massive difference in raw compute throughput that aligns with the shift from a 2015-era Maxwell chip to a 2025-era Blackwell design.

The gap narrows somewhat in other DirectX tests, but remains substantial. In `passmark_directx_12`, the RTX PRO 5000 scores 78 versus the M5000M’s 29, a 62.8% difference. The older M5000M’s DirectX 12 support is limited to feature level 12_1, while the new card supports DirectX 12 Ultimate (12_2), which explains part of this performance chasm. Similarly, in `passmark_directx_11`, the newer card scores 219 against the older card’s 54, a 75.3% gap. Even in the legacy `passmark_directx_9` test, the Blackwell GPU maintains a 61.7% lead with a score of 311 versus 119.

The most telling general-purpose metric is `passmark_g3d`, which serves as a composite gaming and graphics score. Here, the RTX PRO 5000 achieves 24,310, which is over three times the M5000M’s score of 7,062. This is a 71% difference. Even in a 2D test (`passmark_g2d`), which is often less dependent on raw processing power, the newer card leads with 914 points versus 476, a 47.9% advantage. This suggests that even fundamental data throughput and memory bandwidth improvements have a tangible impact on everyday workloads.

The only shared benchmark where the M5000M shows relative strength is in its `geekbench_opencl` score of 22,920 and `geekbench_vulkan` score of 24,875. However, the RTX PRO 5000 was not tested in these specific workloads, so no direct comparison can be made. In the tests where both cards are present, the RTX PRO 5000’s victory is absolute, with a win count of 7 out of 7.

The Verdict

From a pure performance standpoint, the verdict is unambiguous. The NVIDIA RTX PRO 5000 72 GB Blackwell is the superior product in every measurable way within this dataset. The data shows that it delivers a minimum of 47.9% higher performance in 2D tasks and up to 82.4% higher performance in compute-heavy workloads. For any application that relies on DirectX 10, 11, or 12, or on general GPU compute, the RTX PRO 5000 is the only rational choice.

The Quadro M5000M’s only claim to relevance is its legacy status. It is an end-of-life product from the Maxwell era, and its benchmark scores place it in the 37th percentile of all GPUs, a figure identical to the RTX PRO 5000’s percentile. This is a curious data point, as the newer card’s average benchmark score (6,407) is actually slightly lower than the M5000M’s (6,481). This is likely due to the inclusion of different benchmark tests in each card's average calculation, but it does highlight that the M5000M is not a slouch in its own right, sitting within 1.1% of its nearest rival, the Intel UHD Graphics P750.

However, the benchmark results are not a close contest. The RTX PRO 5000 is a modern, active product with a 300 W TDP and a 1x 16-pin power connector, while the M5000M is a 100 W MXM module. The data indicates that the RTX PRO 5000 is designed for demanding, modern professional workloads, whereas the M5000M is a dated component. For anyone building a system today, the RTX PRO 5000 is the definitive choice based on performance. For anyone maintaining a legacy system that requires the MXM-B form factor, the M5000M remains a functional, if obsolete, option.

FAQ

Q: Which GPU has the higher benchmark score in DirectX 12?

A: The NVIDIA RTX PRO 5000 72 GB Blackwell scores 78 in `passmark_directx_12`, which is 62.8% higher than the NVIDIA Quadro M5000M’s score of 29.

Q: How much faster is the RTX PRO 5000 in general 3D graphics?

A: In the `passmark_g3d` test, the RTX PRO 5000 scores 24,310 compared to the M5000M’s 7,062, a performance advantage of 71%.

Q: What is the most significant difference in compute performance?

A: The largest gap is in `passmark_gpu_compute`, where the RTX PRO 5000’s score of 15,667 is 82.4% higher than the M5000M’s score of 2,756.

Q: Are there any benchmarks where the Quadro M5000M is competitive?

A: Yes, in the `geekbench_opencl` and `geekbench_vulkan` tests, the M5000M scores 22,920 and 24,875, respectively. However, the RTX PRO 5000 has no scores for these tests, so a direct comparison is impossible.

Q: How does the average benchmark score of each GPU compare?

A: The Quadro M5000M has a higher average benchmark score of 6,481, while the RTX PRO 5000 has an average of 6,407. This is despite the newer card winning every single head-to-head test.

Q: What is the performance delta between the two GPUs in 2D tasks?

A: In the `passmark_g2d` test, the RTX PRO 5000 scores 914, which is 47.9% higher than the M5000M’s score of 476.

Specification Differences

The specification sheet reveals a complete overhaul between generations. The RTX PRO 5000 has a significantly larger memory pool, offering 72 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s of bandwidth. The M5000M offers 8 GB of GDDR5 on a 256-bit bus, with a bandwidth of 160.4 GB/s. The newer card also has a much higher power envelope, rated at 300 W versus 100 W, and requires a 1x 16-pin power connector, while the M5000M draws power from the MXM slot.

Clock speeds have also increased dramatically. The RTX PRO 5000 has a base clock of 1740 MHz and a boost clock of 2377 MHz, compared to the M5000M’s 962 MHz base and 1051 MHz boost. The physical form factor differs as well: the RTX PRO 5000 is a dual-slot card measuring 267 mm in length, while the M5000M is an MXM Module. The bus interface has been updated from MXM-B (3.0) to PCIe 5.0 x16. The display outputs are also different, with the newer card offering 4x DisplayPort 2.1b, while the older card’s outputs are listed as "Portable Device Dependent."

Architecture Differences

The architectural leap is the fundamental reason for the performance disparity. The Quadro M5000M is built on the Maxwell 2.0 architecture using the GM204 chip, fabricated on a 28 nm process at TSMC. It contains 5,200 million transistors on a 398 mm² die. In contrast, the RTX PRO 5000 uses the Blackwell 2.0 architecture with the GB202 chip, manufactured on a 5 nm process, also by TSMC. This newer chip packs 92,200 million transistors into a 750 mm² die, resulting in a transistor density of 122.9M / mm² compared to the older chip’s 13.1M / mm².

The compute resources are scaled up massively. The RTX PRO 5000 features 14,080 shading units, 440 TMUs, and 160 ROPs. The M5000M has 1,536 shading units, 96 TMUs, and 64 ROPs. The newer GPU also introduces dedicated hardware that the older one lacks entirely: 110 RT cores for ray tracing and 440 tensor cores for AI acceleration. This is reflected in the FP32 performance, which jumps from 3.229 TFLOPS on the M5000M to 66.94 TFLOPS on the RTX PRO 5000. The newer card also supports FP16 at a 1:1 ratio (66.94 TFLOPS), while the older card has no listed FP16 performance. The API support has also been updated, with the RTX PRO 5000 supporting DirectX 12 Ultimate (12_2) versus the M5000M’s DirectX 12 (12_1).

Where Each One Wins

Based on the data, the NVIDIA RTX PRO 5000 72 GB Blackwell is the winner in every single category where a direct comparison is possible. It wins in all DirectX 10, 11, and 12 tests, in DirectX 9, in 2D graphics, in 3D graphics, and in GPU compute. Its higher memory bandwidth and capacity make it suited for large datasets and high-resolution textures. The presence of RT and tensor cores positions it for ray-traced rendering and AI-assisted workflows, which are entirely unsupported by the M5000M’s hardware.

The NVIDIA Quadro M5000M’s only "wins" are qualitative. It is a lower-power part (100 W vs 300 W), which could be advantageous in a thermally constrained environment that accepts its MXM form factor. It also has a higher average benchmark score than the RTX PRO 5000, though this is an artifact of the test suite composition. For any task that involves modern graphics APIs, high-resolution compute, or any form of machine learning, the RTX PRO 5000 is the definitive choice. The M5000M is effectively relegated to legacy applications and systems that require its specific MXM-B interface, where its performance, while dated, remains functional.

DETAILED SPECIFICATIONS

SPECIFICATION
Quadro M5000M
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
1,536
14,080 +816.7%
Shaders
1,536
14,080 +816.7%
TMUs
96
440 +358.3%
ROPs
64
160 +150.0%
SM Count
—
110
Clocks
Base Clock
962 MHz
1740 MHz
Boost Clock
1051 MHz
2377 MHz
Memory Clock
1253 MHz 5 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
8 GB
72 GB
VRAM (MB)
8,192
73,728 +800.0%
Memory Type
GDDR5
GDDR7
Memory Bus
256 bit
384 bit
Bandwidth
160.4 GB/s
1.34 TB/s
Cache
L1 Cache
48 KB (per SMM)
128 KB (per SM)
L2 Cache
2 MB
96 MB
Performance
Pixel Rate
67.26 GPixel/s
380.3 GPixel/s
Texture Rate
100.9 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
3.229 TFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
100.9 GFLOPS (1:32)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
—
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
100 W
300 W
TDP (W)
100
300 +200.0%
Suggested PSU
—
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Maxwell 2.0
Blackwell 2.0
GPU Name
GM204
GB202
Generation
Quadro Maxwell-M (Mx000M)
Blackwell PRO W (x000)
Process Size
28 nm
5 nm
Transistors
5,200 million
92,200 million
Die Size
398 mm²
750 mm²
Foundry
TSMC
TSMC
Density
13.1M / mm²
122.9M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
5.2
12.0
Shader Model
6.8
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
4x DisplayPort 2.1b
Bus Interface
MXM-B (3.0)
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
Quadro Kepler-M
Workstation Ada
Successor
Quadro Pascal-M
—
View Quadro M5000M Details View RTX PRO 5000 72 GB Blackwell Details