Intel Arc A380E x2 vs NVIDIA Jetson Orin Nano Super Comparison
Intel Arc A380E x2
Jetson Orin Nano Super
Analysis: Intel Arc A380E x2 vs NVIDIA Jetson Orin Nano Super
Head-to-Head Benchmarks
The recorded data shows no direct benchmark scores for either the Intel Arc A380E x2 or the NVIDIA Jetson Orin Nano Super, so the comparison relies on the architectural specifications and calculated performance metrics. Both products occupy the 50th percentile versus all GPUs in the database, indicating they sit in the mid-range of overall performance distribution.
The Intel Arc A380E x2 delivers 4.096 TFLOPS of FP32 compute, which is 1.96 times the 2.089 TFLOPS of the Jetson Orin Nano Super. This near-doubling of raw floating-point throughput positions the Arc A380E x2 substantially ahead in any workload that scales directly with shader throughput. The gap widens further in FP16 operations, where the Intel part reaches 8.192 TFLOPS versus the NVIDIA part's 4.178 TFLOPS. Both products achieve their FP16 numbers through a 2:1 ratio relative to FP32, so the proportional advantage remains consistent.
Pixel throughput tells a similar story. The Arc A380E x2 processes 64.00 GPixel/s, while the Jetson Orin Nano Super manages 16.32 GPixel/s. That represents a 3.92 times advantage for the Intel solution in fill-rate-bound scenarios. Texture rate follows the same pattern: 128.0 GTexel/s for Intel versus 32.64 GTexel/s for NVIDIA, a 3.92 times margin. These ratios reflect the underlying hardware differences, with the Arc A380E x2 featuring 64 TMUs and 32 ROPs against 32 TMUs and 16 ROPs on the Jetson part.
Memory bandwidth also favors the Intel product decisively. The Arc A380E x2 uses 6 GB of GDDR6 across a 96-bit bus, delivering 186.0 GB/s. The Jetson Orin Nano Super pairs 8 GB of LPDDR5 with a 128-bit bus for 102.4 GB/s. The Intel solution holds a 1.82 times bandwidth advantage, which matters for texture-heavy scenes and large working sets that exceed the NVIDIA part's capacity.
The memory capacity situation reverses. The Jetson Orin Nano Super offers 8 GB versus 6 GB, a 33% larger pool. For workloads where the dataset must reside entirely in local memory, the NVIDIA part can accommodate larger models or scenes before spilling to system memory.
Clock speeds show the Intel GPU running at 2000 MHz for both base and boost, while the Jetson part lists no base or boost clock in the database. Memory clocks differ substantially: 1937 MHz with 15.5 Gbps effective data rate for the Arc A380E x2 versus 800 MHz with 6.4 Gbps effective for the Jetson. This 2.42 times effective memory clock advantage contributes directly to the bandwidth gap.
Power consumption introduces a major trade-off. The Arc A380E x2 draws 130 W TDP, while the Jetson Orin Nano Super consumes only 25 W. The Intel part uses 5.2 times the power to achieve its performance leads. Normalizing the FP32 throughput per watt, the Jetson delivers 0.0836 TFLOPS/W (2.089 / 25), while the Arc A380E x2 delivers 0.0315 TFLOPS/W (4.096 / 130). The NVIDIA solution is 2.65 times more power-efficient in raw FP32 compute.
The Verdict
The data indicates two fundamentally different design targets. The Intel Arc A380E x2 is a discrete, single-slot GPU measuring 265 mm in length with a 130 W TDP, a 6-pin power connector, a suggested 300 W power supply, and eight mini-DisplayPort 2.0 outputs. It is end-of-life production status. The NVIDIA Jetson Orin Nano Super is an integrated graphics processor on a 70 mm by 45 mm board with a 25 W TDP, no power connectors, display outputs described as portable device dependent, and active production status. Its launch MSRP is 249 USD.
Benchmark-derived specifications show the Arc A380E x2 wins on raw throughput across FP32, FP16, pixel rate, texture rate, and memory bandwidth. Any application that pushes high frame rates, heavy shader work, or large textures will favor the Intel product. The Jetson Orin Nano Super wins on power efficiency, memory capacity, and physical footprint. Its 8 GB of unified LPDDR5 memory suits embedded AI inference where model size matters more than peak fill rate.
The Jetson part's 32 tensor cores are the single most important architectural differentiator. The Arc A380E x2 lists no tensor cores, meaning its FP16 advantage does not translate to accelerated matrix operations. The Jetson part's 2.65 times better FP32-per-watt efficiency, combined with tensor hardware, makes it the appropriate choice for always-on edge deployments. The Arc A380E x2, with its 3.92 times fill-rate advantage and 1.82 times bandwidth advantage, suits traditional rendering workloads where power budgets allow a 130 W draw.
Architecture Differences
The Intel Arc A380E x2 uses the DG2-128 chip built on TSMC's 6 nm process. The die measures 157 mm² and contains 7,200 million transistors, yielding a transistor density of 45.9 million per square millimeter. The architecture is Xe-HPG from the Alchemist generation, released on 2024-03-31. Its predecessor is Xe Graphics, and its successor is Battlemage.
The NVIDIA Jetson Orin Nano Super uses the GA10B chip fabricated on Samsung's 8 nm process. The die measures 200 mm² with transistor count listed as unknown. The architecture is Ampere from the Tegra generation, released on 2024-12-16. No predecessor or successor is recorded.
The Intel chip packs 1024 shading units, 64 TMUs, 32 ROPs, and 8 ray tracing cores. The NVIDIA chip also has 1024 shading units but only 32 TMUs and 16 ROPs, and it lists no ray tracing cores. Instead, the Jetson part adds 32 tensor cores, which the Arc A380E x2 does not have. This trade-off explains the performance profile: Intel invests in pixel and texture throughput plus ray tracing, while NVIDIA invests in tensor operations for neural network inference.
Memory subsystems diverge completely. Intel uses 6 GB GDDR6 on a 96-bit bus with a dedicated memory clock of 1937 MHz. NVIDIA uses 8 GB LPDDR5 on a 128-bit bus at 800 MHz. GDDR6 provides higher bandwidth per pin, while LPDDR5 offers lower power and integration with the system-on-chip package. The Intel approach prioritizes throughput, the NVIDIA approach prioritizes capacity and energy efficiency.
The Arc A380E x2 uses a PCIe 4.0 x8 interface and requires a single-slot bracket with a 6-pin power connector. The Jetson Orin Nano Super uses PCIe 4.0 x4 and is classified as an IGP (integrated graphics processor), requiring no external power. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API compatibility is equivalent.
The Intel part is 265 mm long, 127 mm tall, and 20 mm wide, a standard discrete card footprint. The NVIDIA part is 70 mm long and 45 mm tall, a module designed for embedded systems. The process node difference (6 nm versus 8 nm) and the TDP difference (130 W versus 25 W) reflect these divergent physical designs.
FAQ
Q: Which GPU has higher FP32 compute performance?
A: The Intel Arc A380E x2 delivers 4.096 TFLOPS, nearly double the 2.089 TFLOPS of the NVIDIA Jetson Orin Nano Super.
Q: How does memory bandwidth compare between the two?
A: The Intel part achieves 186.0 GB/s over a 96-bit GDDR6 interface, while the NVIDIA part reaches 102.4 GB/s over a 128-bit LPDDR5 interface. Intel holds a 1.82 times advantage.
Q: Which product has more memory capacity?
A: The NVIDIA Jetson Orin Nano Super has 8 GB of LPDDR5, while the Intel Arc A380E x2 has 6 GB of GDDR6. The NVIDIA part offers 33% more memory.
Q: Does either GPU support hardware ray tracing?
A: The Intel Arc A380E x2 includes 8 ray tracing cores. The NVIDIA Jetson Orin Nano Super lists no ray tracing cores.
Q: Which GPU has tensor cores for AI workloads?
A: Only the NVIDIA Jetson Orin Nano Super has 32 tensor cores. The Intel Arc A380E x2 does not list any tensor core hardware.
Q: What is the power consumption difference?
A: The Intel Arc A380E x2 has a 130 W TDP, while the NVIDIA Jetson Orin Nano Super has a 25 W TDP. The Intel part consumes 5.2 times the power.
Where Each One Wins
The Intel Arc A380E x2 wins in every throughput metric recorded. Its 4.096 TFLOPS FP32 is 96% higher than the NVIDIA part's 2.089 TFLOPS. Its 8.192 TFLOPS FP16 is 96% higher than the Jetson's 4.178 TFLOPS. Pixel rate of 64.00 GPixel/s beats 16.32 GPixel/s by 3.92 times, and texture rate of 128.0 GTexel/s beats 32.64 GTexel/s by the same margin. Memory bandwidth of 186.0 GB/s exceeds 102.4 GB/s by 1.82 times. The 8 ray tracing cores provide hardware acceleration that the Jetson part lacks entirely. These wins make the Arc A380E x2 the stronger choice for 3D rendering, high-resolution compositing, and any workload where fill rate and bandwidth determine performance.
The NVIDIA Jetson Orin Nano Super wins on power efficiency and capacity. Its 25 W TDP versus 130 W means it operates in environments where a discrete card cannot fit or cannot be cooled. The FP32-per-watt ratio of 0.0836 TFLOPS/W versus 0.0315 TFLOPS/W makes it 2.65 times more efficient per watt. The 8 GB memory capacity exceeds the 6 GB of the Intel part, allowing larger models and datasets. The 32 tensor cores provide dedicated matrix math hardware absent from the Intel GPU. The 70 mm by 45 mm physical footprint suits embedded and portable deployments, whereas the 265 mm card requires a standard expansion slot and a 300 W power supply.
The two products do not compete for the same socket. The Arc A380E x2 is an end-of-life discrete card built for PCIe 4.0 x8 slots with eight mini-DisplayPort 2.0 outputs. The Jetson Orin Nano Super is an active embedded module with portable-device-dependent display output. The Arc A380E x2 wins where rendering performance and display connectivity are paramount. The Jetson Orin Nano Super wins where power limits, memory capacity, tensor acceleration, and physical size take priority. The database's equal 50th percentile ranking for both reflects that they arrive at comparable overall standing through opposite design priorities.