Intel Arc A380E x2 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison

Intel
GPU

Intel Arc A380E x2

CORE STATE DG2-128
VRAM 6 GB
CLOCK SPEED 2000 MHz
TDP 130 W
BUS WIDTH 96 bit
ARCHITECTURE Xe-HPG
nm
PROCESS 6 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: Intel Arc A380E x2 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102

Intel Arc A380E x2 pairs two Alchemist-based GPUs, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 is a single Ada Lovelace card. This comparison centers on a multi-GPU configuration with modest per-GPU resources versus a monolithic high-end part. The recorded data shows a clear split: the Arc setup targets multi-display and specialized compute workloads, while the NVIDIA card dominates conventional gaming and rendering performance.

Where Each One Wins

The Intel Arc A380E x2 configuration wins in scenarios where parallel GPU resources and extensive display outputs matter. Each Arc A380E chip uses the DG2-128 die with 1,024 shading units, and two of them together provide 2,048 shading units, 128 TMUs, and 64 ROPs. The 8x mini-DisplayPort 2.0 outputs per card, sixteen total in a dual-card setup, make this configuration suitable for digital signage, media walls, or multi-monitor professional workstations. The single-slot design and 130 W TDP per card allow dense installation in chassis with multiple PCIe slots.

The NVIDIA GeForce RTX 4070 Ti SUPER AD102 wins in every performance-oriented category. It uses the AD102 chip with 8,448 shading units, 264 TMUs, 96 ROPs, 66 RT cores, and 264 tensor cores. Its 44.10 TFLOPS FP32 throughput dwarfs the combined 8.192 TFLOPS of two Arc A380E cards. The 16 GB GDDR6X memory with 672.3 GB/s bandwidth provides 2.67 times the bandwidth of the dual 6 GB GDDR6 setups at 186.0 GB/s each. The NVIDIA card also delivers 250.6 GPixel/s pixel fill rate versus 128.0 GPixel/s combined for both Intel cards, and 689.0 GTexel/s texture rate versus 256.0 GTexel/s combined.

Architecture Differences

The two cards use different process nodes and die designs. Intel builds the Arc A380E on TSMC 6 nm with 7,200 million transistors on a 157 mm² die, yielding a transistor density of 45.9M per mm². NVIDIA builds the RTX 4070 Ti SUPER AD102 on TSMC 5 nm with 76,300 million transistors on a 609 mm² die, yielding 125.3M per mm². The NVIDIA die packs over 10 times the transistor count into a die that is 3.9 times larger.

Memory technology differs significantly. The Arc A380E uses 6 GB GDDR6 per card with a 96-bit bus and 186.0 GB/s bandwidth. The RTX 4070 Ti SUPER uses 16 GB GDDR6X with a 256-bit bus and 672.3 GB/s bandwidth. The GDDR6X memory runs at 21 Gbps effective versus 15.5 Gbps effective for the Intel cards.

The compute feature sets also diverge. Intel provides 8 RT cores per card, 16 total, with FP16 throughput of 8.192 TFLOPS per card at a 2:1 ratio. NVIDIA provides 66 RT cores and 264 tensor cores with FP16 throughput of 44.10 TFLOPS at a 1:1 ratio, meaning the NVIDIA card matches its FP32 rate in FP16 work. The Arc A380E has no tensor cores, limiting AI acceleration capabilities. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Power and cooling requirements show a stark contrast. Each Arc A380E draws 130 W with a single 6-pin connector and a suggested 300 W PSU. The RTX 4070 Ti SUPER draws 285 W with a single 16-pin connector and a suggested 600 W PSU. The Intel cards occupy single-slot profiles at 265 mm length, 127 mm height, and 20 mm width. The NVIDIA card needs triple-slot clearance at 310 mm length, 140 mm height, and 61 mm width.

Head-to-Head Benchmarks

The database contains a single benchmark result for the RTX 4070 Ti SUPER AD102: 3DMark Steel Nomad DX12 scores 6,269.5 points. The Arc A380E x2 has no recorded benchmarks, so direct measured comparison is impossible from the recorded data. The NVIDIA card's percentile versus all GPUs is 36, indicating it outperforms 64% of the database's tracked graphics cards.

The nearest rivals for the RTX 4070 Ti SUPER AD102 show tight clustering. The NVIDIA GeForce RTX 5070 Ti SUPER matches it exactly at 6,270 average score with a 0% delta. The NVIDIA Quadro K620 trails by 0.2% at 6,282, and the AMD Radeon R7 M350 trails by 0.9% at 6,327. The AMD FirePro W600 leads by 0.8% at 6,223. These deltas are all within 1%, indicating that the 4070 Ti SUPER AD102 sits in a dense performance band where adjacent GPUs produce nearly identical scores.

Without benchmark data for the Arc A380E x2, the analysis relies on architectural specifications. The dual Arc cards provide 4.096 TFLOPS FP32 each, 8.192 TFLOPS combined. The RTX 4070 Ti SUPER delivers 44.10 TFLOPS FP32, which is 5.4 times the combined Intel throughput. Memory bandwidth comparison favors NVIDIA even more: 672.3 GB/s versus 372.0 GB/s combined for two Arc cards, a 1.8 times advantage. Pixel fill rate favors NVIDIA at 250.6 GPixel/s versus 128.0 GPixel/s combined, a 1.96 times advantage. Texture fill rate favors NVIDIA at 689.0 GTexel/s versus 256.0 GTexel/s combined, a 2.7 times advantage.

FAQ

Q: Which card has more shading units?

A: The RTX 4070 Ti SUPER AD102 has 8,448 shading units on a single GPU. Two Arc A380E cards combined provide 2,048 shading units, 1,024 per card.

Q: How does memory capacity compare?

A: The NVIDIA card has 16 GB GDDR6X on a 256-bit bus. Each Intel Arc A380E has 6 GB GDDR6 on a 96-bit bus, so two cards provide 12 GB total.

Q: What display outputs does each card offer?

A: The Arc A380E provides 8x mini-DisplayPort 2.0 per card, sixteen total in a dual-card setup. The RTX 4070 Ti SUPER provides 1x HDMI 2.1 and 3x DisplayPort 1.4a.

Q: Which card has tensor cores?

A: Only the RTX 4070 Ti SUPER AD102 has tensor cores, with 264 available. The Arc A380E has no tensor core count listed.

Q: What is the power draw difference?

A: Each Arc A380E draws 130 W, totaling 260 W for two cards. The RTX 4070 Ti SUPER draws 285 W. The NVIDIA card requires a 600 W suggested PSU, while each Intel card suggests a 300 W PSU.

Q: How does FP16 performance compare?

A: The RTX 4070 Ti SUPER delivers 44.10 TFLOPS FP16 at a 1:1 ratio with FP32. Each Arc A380E delivers 8.192 TFLOPS FP16 at a 2:1 ratio, totaling 16.384 TFLOPS for two cards.

The Verdict

The RTX 4070 Ti SUPER AD102 is the superior choice for any workload that depends on raw compute throughput, memory bandwidth, or rasterization speed. Its 44.10 TFLOPS FP32, 672.3 GB/s memory bandwidth, and 250.6 GPixel/s pixel rate place it in a different performance class than two Arc A380E cards combined. The 16 GB memory capacity also provides more headroom for large datasets and high-resolution textures.

The Arc A380E x2 configuration serves a niche purpose. Its sixteen mini-DisplayPort 2.0 outputs across two single-slot, 130 W cards enable high-density multi-display installations where the NVIDIA card's four outputs are insufficient. The lower per-card power draw and single-slot profile also allow deployment in systems where space and thermal budget are constrained.

The benchmark data for the RTX 4070 Ti SUPER AD102 shows it performs on par with the RTX 5070 Ti SUPER, with all nearest rivals within 0.9% of its score. This indicates the NVIDIA card delivers consistent, well-rounded performance. The Arc A380E has no recorded benchmark scores, so its real-world performance cannot be verified from the database.

For gaming, rendering, or AI workloads, the RTX 4070 Ti SUPER AD102 is the obvious pick. Its 66 RT cores, 264 tensor cores, and 44.10 TFLOPS FP16 throughput provide capabilities the Intel cards lack entirely. For specialized multi-display professional setups, the Arc A380E x2 offers unique connectivity that no other card in this comparison matches.

Specification Differences

| Specification | Intel Arc A380E x2 | NVIDIA GeForce RTX 4070 Ti SUPER AD102 |

| --- | --- | --- |

| Chip | DG2-128 | AD102 |

| Architecture | Xe-HPG | Ada Lovelace |

| Generation | Alchemist (Arc 3) | GeForce 40 |

| Process Node | 6 nm | 5 nm |

| Transistors | 7,200 million | 76,300 million |

| Die Size | 157 mm² | 609 mm² |

| Base Clock | 2000 MHz | 2340 MHz |

| Boost Clock | 2000 MHz | 2610 MHz |

| Memory Size | 6 GB GDDR6 | 16 GB GDDR6X |

| Memory Bus | 96 bit | 256 bit |

| Memory Bandwidth | 186.0 GB/s | 672.3 GB/s |

| Shading Units | 1024 | 8448 |

| TMUs | 64 | 264 |

| ROPs | 32 | 96 |

| RT Cores | 8 | 66 |

| Tensor Cores | None | 264 |

| Pixel Rate | 64.00 GPixel/s | 250.6 GPixel/s |

| Texture Rate | 128.0 GTexel/s | 689.0 GTexel/s |

| FP32 | 4.096 TFLOPS | 44.10 TFLOPS |

| FP16 | 8.192 TFLOPS (2:1) | 44.10 TFLOPS (1:1) |

| TDP | 130 W | 285 W |

| Slot Width | Single-slot | Triple-slot |

| Power Connectors | 1x 6-pin | 1x 16-pin |

| Suggested PSU | 300 W | 600 W |

| Bus Interface | PCIe 4.0 x8 | PCIe 4.0 x16 |

| Display Outputs | 8x mini-DisplayPort 2.0 | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| Length | 265 mm | 310 mm |

| Height | 127 mm | 140 mm |

| Width | 20 mm | 61 mm |

| Release Date | 2024-03-31 | 2024-06-09 |

| Successor | Battlemage | GeForce 50 |

| Launch MSRP | None listed | 799 USD |

DETAILED SPECIFICATIONS

SPECIFICATION
A380E x2
RTX 4070 Ti SUPER AD102
Core Specs
Shading Units
1,024
8,448 +725.0%
Shaders
1,024
8,448 +725.0%
TMUs
64
264 +312.5%
ROPs
32
96 +200.0%
SM Count
—
66
Execution Units
128
—
Clocks
Base Clock
2000 MHz
2340 MHz
Boost Clock
2000 MHz
2610 MHz
Memory Clock
1937 MHz 15.5 Gbps effective
1313 MHz 21 Gbps effective
Memory
Memory Size
6 GB
16 GB
VRAM (MB)
6,144
16,384 +166.7%
Memory Type
GDDR6
GDDR6X
Memory Bus
96 bit
256 bit
Bandwidth
186.0 GB/s
672.3 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
4 MB
48 MB
Performance
Pixel Rate
64.00 GPixel/s
250.6 GPixel/s
Texture Rate
128.0 GTexel/s
689.0 GTexel/s
FP32 (TFLOPS)
4.096 TFLOPS
44.10 TFLOPS
FP64 (TFLOPS)
1,024.0 GFLOPS (1:4)
689.0 GFLOPS (1:64)
FP16 (TFLOPS)
8.192 TFLOPS (2:1)
44.10 TFLOPS (1:1)
AI/RT
RT Cores
8
66 +725.0%
Tensor Cores
—
264
XMX Cores
128
—
Power
TDP
130 W
285 W
TDP (W)
130
285 +119.2%
Suggested PSU
300 W
600 W
Power Connectors
1x 6-pin
1x 16-pin
Architecture
Architecture
Xe-HPG
Ada Lovelace
GPU Name
DG2-128
AD102
Generation
Alchemist (Arc 3)
GeForce 40
Process Size
6 nm
5 nm
Transistors
7,200 million
76,300 million
Die Size
157 mm²
609 mm²
Foundry
TSMC
TSMC
Density
45.9M / mm²
125.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
—
8.9
Shader Model
6.6
6.9
Physical
Slot Width
Single-slot
Triple-slot
Length
265 mm 10.4 inches
310 mm 12.2 inches
Height
127 mm 5 inches
140 mm 5.5 inches
Outputs
8x mini-DisplayPort 2.0
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x16
Other
Launch Price
—
799 USD
Production
End-of-life
End-of-life
Predecessor
Xe Graphics
GeForce 30
Successor
Battlemage
GeForce 50
View Arc A380E x2 Details View GeForce RTX 4070 Ti SUPER AD102 Details